E16 (12V Integrated LED)
More Views
E16
Solid Brass, All-purpose, Low-voltage LED Directional
- Overall length from knuckle pivot: 4.9" (12.4 cm)
- Diameter: 2.4" (6 cm)
- 12 Volt AC / DC with integral driver (9V-15V Input, dimmable below 9V). Remote transformer required.
Specifications
Instructions
Dimmer / Transformer Compatibility
LED Light Engine Thermal Test Report for Hot Tropical & Desert Climates
Test Reports / Photometrics
| LM79 | IES |
| E16-7W-A-SP | E16-7W-A-SP |
| E16-7W-A-NFL | E16-7W-A-NFL |
| E16-7W-A-FL | E16-7W-A-FL |
| E16-11W-SP | E16-11W-SP |
| E16-11W-NFL | E16-11W-NFL |
| E16-11W-FL | E16-11W-FL |
Lamps
Cree triple LED: 7 Watt AMBER (1350K) and 11 Watt Warm White (3000K)
| 7W-A-SP | 7 Watt | 10° spot |
| 7W-A-NFL | 7 Watt | 30° narrow flood |
| 7W-A-FL | 7 Watt | 60° flood |
| 11W-SP | 11 Watt | 10° spot |
| 11W-NFL | 11 Watt | 30° narrow flood |
| 11W-FL | 11 Watt | 60° flood |
* 11-Watt light engine features adjustable output via a switch under the optic
Mounting Accessories
| CM-M1 | 4.75" (12.1cm) diameter solid brass canopy, single-hole |
| CM-M2 | 4.75" (12.1cm) diameter solid brass canopy, double-hole (two fixture heads per canopy) |
| GS2 | Heavy-duty ground spike |
| GS2BC | Heavy-duty ground spike with cast brass cap |
| GS23R | Heavy-duty ground spike with brass cap for telescoping fixture riser |
| GS4 | Standard ground spike with cast brass cap |
| JB | Cast brass junction box |
| SA | Sure Aim locking rotation accessory (not available with STEM-S) |
| SQ1 | 4.75" (12.1cm) square brass canopy |
| SQ1-3.5 | 3.5" (8.9cm) small square brass canopy |
| SQ2 | 4.75" (12.1cm) square brass canopy, double hole (two fixture heads per canopy) |
| STEM-C | Brass riser for applications where fixture is directed UPWARD (4"/10cm, 8"/20cm, 12"/30cm, 16"/40cm, 20"/51cm, or custom height—specify in inches) |
| STEM-S | Brass riser for applications where fixture is directed DOWNWARD, such as lighting for steps (8"/20cm, 12"/30cm, 16"/40cm, 20"/51cm, or custom height—specify in inches) |
| TDM1 | Brass tree/deck mount with stainless steel screws |
| TDM2 | Brass tree mount with nylon strap (48", 72", or 96") |
| TDM2SS | Brass tree mount with stainless steel strap (48", 72", or 96") |
| TDM3 | Brass low-profile deck/wall mount (SA accessory recommended) |
| TDM4 | Brass low-profile tree mount with notch for wire (SA accessory recommended) |
| TMJB | Brass tree-mounted junction box, single fixture mount, stainless steel strap (48", 72", or 96") |
| TMJB2 | Brass tree-mounted junction box, double fixture mount, stainless steel strap (48", 72", or 96") |
| TMJBX | Brass tree-mounted junction box, single fixture mount, stainless steel screws |
| TMJB2X | Brass tree-mounted junction box, double fixture mount, stainless steel screws |
Optical Accessories
| BGS | Brass glare shield, 45° cutoff |
| BGSF | Brass glare shield, full cutoff with weep hole |
| CTO-1/4-2.04 | Color Temperature Orange filter 1/4 |
| CTO-1/2-2.04 | Color Temperature Orange filter 1/2 |
| CTO-3/4-2.04 | Color Temperature Orange filter 3/4 |
| FR | Frosted lens, 1/8” (3mm) thick |
| HL1 | Honeycomb louver, 1/8” (3mm) thick |
| HL2 | Honeycomb louver, 1/4” (6mm) thick |
| KP | Extended snoot (no weep hole) for DOWNLIGHTING only |
| PR | Prismatic spread lens, 1/8” (3mm) thick |
| RT | Rectilinear spread lens, 1/8” (3mm) thick |
| SL | Solite (Soft Focus) lens, 1/8” (3mm) thick |
Magento Commerce
Copper and Brass Exterior
Lighting for the Next Generation
1-800-405-6732
