E8
Solid Brass, Low-profile, Low-voltage Directional
- Overall length from knuckle pivot: 4.1" (10.5cm)
- Diameter: 1.6" (4.2cm)
- 12 Volt AC / DC with integral driver (9V-15V Input, dimmable below 9V)
- Remote transformer required
Specifications
Dimmer / Transformer Compatibility
Instructions
LED Light Engine Thermal Test Report for Hot Tropical & Desert Climates
Test Reports / Photometrics
Lamps
Cree XPE2 LED: 2 Watt AMBER (1500K)
Cree XPG2 LED: 3 or 4 Watt Warm White (3000K)*
Triac Dimmable down to: MLV <5% typical, ELV <10% typical
2W-A-SP | 2 Watt Amber Spot |
10° beam, 20° field |
2W-A-NFL | 2 Watt Amber Narrow Flood |
15° beam, 32° field |
2W-A-FL | 2 Watt Amber Flood |
29° beam, 61° field |
2W-A-NO | 2 Watt Amber No Optic |
46° beam, 114° field |
3W-SP | 3 Watt Spot |
13° beam, 24° field |
3W-NFL | 3 Watt Narrow Flood |
17° beam, 37° field |
3W-FL | 3 Watt Flood |
30° beam, 62° field |
3W-NO | 3 Watt No Optic |
47° beam, 86° field |
4W-SP | 4 Watt Spot |
13° beam, 24° field |
4W-NFL | 4 Watt Narrow Flood |
17° beam, 38° field |
4W-FL | 4 Watt Flood |
30° beam, 62° field |
4W-NO | 4 Watt No Optic |
71° beam, 121° field |
* Also available in 2700K. Add color suffix to lamp specification, e.g. "3W-NFL-2700K"
Mounting Accessories
GS2 | Heavy-duty ground spike |
GS2BC | Heavy-duty ground spike with cast brass cap |
GS23R | Heavy-duty ground spike with brass cap for telescoping fixture riser |
GS4 | Standard ground spike with cast brass cap |
JB | Cast brass junction box |
SA | Sure Aim locking rotation accessory (not available with STEM-S) |
STEM-C | Brass riser for applications where fixture is directed UPWARD (4"/10cm, 8"/20cm, 12"/30cm, 16"/40cm, 20"/51cm, or custom height—specify in inches) |
STEM-S | Brass riser for applications where fixture is directed DOWNWARD, such as lighting for steps (8"/20cm, 12"/30cm, 16"/40cm, 20"/51cm, or custom height—specify in inches) |
TDM1 | Brass tree/deck mount with stainless steel screws |
TDM2 | Brass tree mount with nylon strap (48", 72", or 96") |
TDM2SS | Brass tree mount with stainless steel strap (48", 72", or 96") |
TDM3 | Brass low-profile deck/wall mount (SA accessory recommended) |
TDM4 | Brass low-profile tree mount with notch for wire (SA accessory recommended) |
TMJB | Brass tree-mounted junction box, single fixture mount, stainless steel strap (48", 72", or 96") |
TMJB2 | Brass tree-mounted junction box, double fixture mount, stainless steel strap (48", 72", or 96") |
TMJBX | Brass tree-mounted junction box, single fixture mount, stainless steel screws |
TMJB2X | Brass tree-mounted junction box, double fixture mount, stainless steel screws |
Optical Accessories
BGS8 | Brass glare shield, 45° cutoff |
BGS8F | Brass glare shield, full cutoff with weep hole |
CTO-1/4-1.36 | Color Temperature Orange filter 1/4 |
CTO-1/2-1.36 | Color Temperature Orange filter 1/2 |
CTO-3/4-1.36 | Color Temperature Orange filter 3/4 |
FR8 | Frosted lens, 1/8" (3mm) thick |
HL8 | Honeycomb louver, 1/8” (3mm) thick |
KP | Exntended snoot (no weep hole) for DOWNLIGHTING only |
PR8 | Prismatic spread lens, 1/8” (3mm) thick |
RT8 | Rectilinear spread lens, 1/8” (3mm) thick |
SL8 | Solite (Soft Focus) lens, 1/8” (3mm) thick |