• E1 Front Architectural E1 Architectural

    E1
    (12V Integrated LED)

    Solid Brass Low-Voltage Fixed Downlight
    • Ideal for post mounting
    • Remote transformer required
    • Custom canopy from 1/8″ thick brass available.  Consult factory with size, shape, and thru hole orientation needed.
    Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 249 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2" dia. x 3.8″ x 1.9” extension (5.1 x 9.7 x 4.8 cm)
    View Details Details Quick View
  • E3-m-2 In-grade E3-m-2 Dims In-grade

    E3-M
    (12V Integrated LED & MR11 LED)

    Solid Brass Low-Profile Marker Light
    • Remote transformer required
    Voltage 12 Volts AC/DC with integral driver (9-15V input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens max 15
    CCT 1000K
    1500K (DarkSky approved)
    2700K
    3000K
    Dimensions Dome diameter: 2.19" [5.6 cm]
    Depth: 3.14" [8.0 cm]
     
    E3-M Four-Sector Illumination (standard)
    E3-M-1 Single-Sector Illumination
    E3-M-2 Two-Sector, Adjacent Illumination
    E3-M-OP Two-Sector, Opposite Illumination
    View Details Details Quick View
  • E17 Top In-grade E17 Dims In-grade

    E17
    (12V Integrated LED & MR16 LED)

    Solid Brass, Low-profile Marker Light
    • Remote transformer required
    • In-ground or concrete installation
    Voltage 12 Volts AC / DC
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K  (DarkSky approved)
    2700K
    3000K
    Dimensions 3.5″ diameter x 5.3” depth [8.9 x 13.5 cm]
    3.8″ [9.6 cm] trim ring outer diameter
     
    E17 Four-Sector Illumination (standard)
    E17-1 Single-Sector Illumination
    E17-2 Two-Sector, Adjacent Illumination
    E17-OP Two-Sector, Opposite Illumination
    View Details Details Quick View
  • L-017 In-grade L-017 Dims In-grade

    L-017
    (12/120/230V MR16 LED)

    Brass & Composite In-Ground Pathlight for High Traffic & Drive-Over Applications The L-017 series in-ground drive-over fixtures are brass & composite pathlights for high-traffic areas. This low-profile fixture is ideal for paths with low ground cover and along pathways used by golf carts, service trucks, or automobiles at country clubs & resorts.
    • “CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring diameter is 6.7″ (17cm) and exposed height reduces to 1.7″ (4.2 cm).   [L-017-CR, L-017-C-CR]
    • Remote transformer required for 12V
    Voltage 12V, 120v, 230V
    Lamps MR16 LED
    CCT 1500K (DarkSky approved)
    3000K
    Dimensions 6.5″ dia. x 1.9″ exposed height (16.5 x 4.9 cm)
    View Details Details Quick View
  • E1-s Nickel Pathlights E1-s Pathlights

    E1-S
    (12V Integrated LED)

    Solid Brass, Low-Voltage, Stem-Mounted Path Light
    • Ideal for walkways and tall groundcover
    • Remote transformer required
    • Custom stem lengths available
    Voltage 12 Volts AC with integral driver (9 – 15V input, dimmable below 9V)
    Lamps Integrated LED
    Lumens max 98
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions Lamp Housing: 1.6” diameter x 3.1"  [4.2 x 7.8 cm]
    View Details Details Quick View
  • M3 Pathlights M6 Pathlights

    M-Series Pathlights
    (12/120V LED Multi-Louver)

    Beachside Lighting’s M-Series Pathlights are the ultimate in heavy-duty landscape lighting.  Made of cast brass, these fixtures are larger than other Beachside pathlights.  The omnidirectional LED lamp is protected by a threaded glass lens.  Louvers are angled at 45° to eliminate glare.  Risers are schedule 80 brass pipe.  A single-louver design also is available for use with an integrated light engine or drop-in MR16 LED. M-series pathlights with amber and red-orange LED lamps are certified as “Wildlife Friendly” by the Florida Fish & Wildlife Conservation Commission.  To view these fixtures click HERE.
    • Durable construction: all brass components
    • Stems available in three sizes: 16″, 20″ (standard), & 24″
    • CSA Listed to US and Canadian safety standards, file #190030
    Voltage 12V, 120V
    Lamps LED
    CCT 1500
    2700
    3000
    View Details Details Quick View
  • M3-led Pathlights M6-led Pathlights

    M-Series LED Pathlights
    (12/120/230V LED Single Louver)

    Beachside Lighting’s M-Series LED Pathlights are the ultimate in heavy-duty landscape lighting.  Made of cast brass, these fixtures are larger than other Beachside pathlights.  The lamp is protected by a threaded glass lens.  Louvers are angled at 45° to eliminate glare.  Risers are schedule 80 brass pipe.  M-series fixtures with a single-louver design use directional LED sources with a reflector.  A traditional multi-louver design also is available with omnidirectional LED light sources. M-series pathlights with amber and red-orange LED lamps are certified as “Wildlife Friendly” by the Florida Fish & Wildlife Conservation Commission.  To view these fixtures click HERE.
    • Durable construction: all brass components
    • Stems available in three sizes: 16″, 20″ (standard), & 24″
    • CSA Listed to US and Canadian safety standards, file #190030
    Voltage 12V, 120V, 230V
    Lamps Integrated LED, MR16 LED
    CCT 1000
    1500
    2700
    3000
    View Details Details Quick View
  • R-003 Pathlights R-003a Pathlights

    R-Series Pathlights
    (12V LED)

    Beachside Lighting’s R-Series Pathlights have set the standard for durability in low-voltage walkway and area lighting.  The completely sealed fixture allows easy access to the brass lamp compartment for tool-free relamping.  Features include an 18-gauge copper shade, a 5 mm-thick frosted glass lens, and a riser made from schedule 40 brass pipe.  The lamping is G4 bi-pin LED.  The omnidirectional lamping allows for a lower profile, with most shade heights positioned so their lower edge is at the bottom of the glass, resulting in low-to-no glare. All fixtures are CSA Listed to US and Canadian safety standards, file #190030.
    • 12 Volts AC
    • Remote transformer required
    • Durable construction: all brass components and copper shades
    Voltage 12V AC
    Lamps Omnidirectional LED
    CCT 1500K
    2700K
    3000K
    View Details Details Quick View
  • E2-bgs8 Architectural E2 Architectural

    E2
    (12V Integrated LED)

    Solid Brass Low-Voltage Fixed Downlight
    • Remote transformer required
    Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 249 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 1.6" dia. body x 2.8" dia. base x 4″ (4.2 x 7 x 10.2 cm)
    View Details Details Quick View
  • R3 Pathlights R3a Pathlights

    R-Series LED Pathlights
    (12/120/230V LED)

    Beachside Lighting’s R-Series LED Pathlights have set the standard for durability in low-voltage walkway and area lighting.  The completely sealed fixture allows easy access to the brass lamp compartment for tool-free relamping.  Features include an 18-gauge copper shade, a 5 mm-thick frosted glass lens, and a riser made from schedule 40 brass pipe.  The lamping is MR16 LED, allowing both 12V and 120V/230V options.  The upward-directed lamp hits a reflector in the shade assembly.  Most shade heights are positioned so their lower edge is at the bottom of the glass, resulting in low-to-no glare. All fixtures are CSA Listed to US and Canadian safety standards, file #190030.
    • Durable construction: all brass components and copper shades
    Voltage 12V, 120V, 230V
    Lamps LED
    CCT 1000K
    1500K
    2700K
    3000K
    View Details Details Quick View
  • E1 Front Architectural E1 Architectural

    E1 Turtle Friendly
    (12V Integrated LED)

    Solid Brass Low-Voltage Fixed Downlight
    • Ideal for post mounting
    • Remote transformer required
    • Custom canopy from 1/8″ thick brass available.  Consult factory with size, shape, and thru hole orientation needed.
    Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 123 max
    CCT 1000K
    1500K
    Dimensions 2" dia. x 3.8″ x 1.9” extension (5.1 x 9.7 x 4.8 cm)
    View Details Details Quick View
  • E1-s-24 Nickel Pathlights E1-s Pathlights

    E1-S Turtle Friendly
    (12V Integrated LED)

    Solid Brass, Low-Voltage, Stem-Mounted Path Light
    • Ideal for walkways and tall groundcover
    • Remote transformer required
    • Custom stem lengths available
    Voltage 12 Volts AC with integral driver (9 – 15V input, dimmable below 9V)
    Lamps Integrated LED
    Lumens max 32
    CCT 1000K
    1500K
    Dimensions Lamp Housing: 1.6” diameter x 3.1"  [4.2 x 7.8 cm]
    View Details Details Quick View
  • E2-bgs8 Architectural E2 Architectural

    E2 Turtle Friendly
    (12V Integrated LED)

    Solid Brass Low-Voltage Fixed Downlight
    • Remote transformer required
    Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 123 max
    CCT 1000K
    1500K
    Dimensions 1.6" dia. body x 2.8" dia. base x 4″ (4.2 x 7 x 10.2 cm)
    View Details Details Quick View
  • E3-m Top Turtle Friendly E3-m-2 Dims Turtle Friendly

    E3-M Turtle Friendly
    (12V Integrated LED & MR11 LED)

    Solid Brass Low-Profile Marker Light
    • Remote transformer required
    Voltage 12 Volts AC/DC with integral driver (9-15V input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens max 5.6
    CCT 1000K
    1500K (DarkSky approved)
    Dimensions Dome diameter: 2.19" [5.6 cm]
    Depth: 3.14" [8.0 cm]
     
    E3-M Four-Sector Illumination (standard)
    E3-M-1 Single-Sector Illumination
    E3-M-2 Two-Sector, Adjacent Illumination
    E3-M-OP Two-Sector, Opposite Illumination
    View Details Details Quick View
  • E3-rl Steplights E3-rl Dims Steplights

    E3-RL
    (12V Integrated LED, MR11 LED)

    Solid Brass Round Louvered Steplight
    • Can be used as an uplight, steplight, or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens 10.7 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2.17″ dia. x 3.14" depth (5.5 x 8 cm)
    View Details Details Quick View
  • E3-rl Turtle Friendly E3-rl Dims Turtle Friendly

    E3-RL Turtle Friendly
    (12V Integrated LED, MR11 LED)

    Solid Brass Round Louvered Steplight
    • Can be used as an steplight or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    CCT 1000K
    1500K
    Dimensions 2.17″ dia. x 3.14" depth (5.5 x 8 cm)
    View Details Details Quick View
  • E3-sql Turtle Friendly E3-sql Dims Turtle Friendly

    E3-SQL Turtle Friendly
    (12V Integrated LED, MR11 LED)

    Solid Brass Square Louvered Steplight
    • Can be used as an steplight or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    CCT 1000K
    1500K
    Dimensions 2.17″ square x 3.14" depth (5.5 x 8 cm)
    View Details Details Quick View
  • E8-30-BGS8-SA Directionals

    E8-30-BGS-SA
    Down Only / Dark Sky
    (12V Integrated LED)

    Solid Brass, Low-profile, Low-Voltage Directional
    • Directional downlight certified by International Dark Sky Association when mounted on VERTICAL surface and aimed downward. This fixture will not work nor be Dark Sky compliant if mounted to a horizontal surface such as the ground or ceiling.
    • Fixture comes standard with angled glare shield and Sure Aim accessory
    • Knuckle can be angled from 0° (straight down) to a maximum of 30° from vertical
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 249
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions Diameter: 1.6″ (4.2cm)
    Overall length from knuckle pivot: 5.9″ (13.9cm)
     
    View Details Details Quick View
  • E8-30-BGS8-SA Directionals

    E8-30-BGS-SA-WL Turtle Friendly
    Down Only / Dark Sky
    (12V Integrated LED)

    Solid Brass, Low-profile, Low-Voltage Directional
    • Directional downlight certified by International Dark Sky Association when mounted on VERTICAL surface and aimed downward. This fixture will not work nor be Dark Sky compliant if mounted to a horizontal surface such as the ground or ceiling.
    • Fixture comes standard with angled glare shield and Sure Aim accessory
    • Knuckle can be angled from 0° (straight down) to a maximum of 30° from vertical
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 123 max
    CCT 1000K
    1500K
    Dimensions Diameter: 1.6″ (4.2cm)
    Overall length from knuckle pivot: 5.9″ (13.9cm)
     
    View Details Details Quick View
  • E9-rl-cr Turtle Friendly E9-rl Dims Turtle Friendly

    E9-RL Turtle Friendly
    (12V Integrated LED, MR16 LED)

    Solid Brass Round Louvered Steplight
    • Remote transformer required
    • Mountable as a steplight or downlight
    • “CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring diameter is 3.8″ (9.6 cm) and fixture depth increases to 5.3″ (13.5 cm).   [E9-RL-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    Dimensions 3.5" trim dia. x 5.0" depth (8.9 x 12.6 cm)
    View Details Details Quick View
  • E9-rcl-cr Turtle Friendly E9-rcl Dims Turtle Friendly

    E9-RCL Turtle Friendly
    (12V Integrated LED, MR16 LED)

    Solid Brass Rectangular Louvered Steplight
    • Remote transformer required
    • Mountable as a steplight or downlight
    • “CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring is 3.3 x 4.3″ (8.3 x 10.9 cm) and fixture depth increases to 5.3″ (13.5 cm).   [E9-RCL-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    Dimensions 3 x 4" trim, 5.0" depth (7.6 x 10.2 cm, 12.6 cm)
    View Details Details Quick View
  • E9-sql-cr Turtle Friendly E9-sql Dims Turtle Friendly

    E9-SQL Turtle Friendly
    (12V Integrated LED, MR16 LED)

    Solid Brass Square Louvered Steplight
    • Remote transformer required
    • Mountable as a steplight or downlight
    • “CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring is 4.3″ square (10.9 cm) and fixture depth increases to 5.3″ (13.5 cm).   [E9-SQL-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    Dimensions 4" square trim x 5.0" depth (10 x 12.6 cm)
    View Details Details Quick View
  • E16-30-BGS-SA Directionals

    E16-30-BGS-SA
    Down Only / Dark Sky
    (12V Integrated LED)

    Solid Brass, All-purpose, Low-voltage LED Directional The E16-30-BGS-SA is a low-voltage directional luminaire with an integrated, replaceable LED light engine.  The warm white light engines features four output settings from 100% to 25%, adjustable in the field.
    • Directional downlight certified by International Dark Sky Association when mounted on VERTICAL surface and aimed downward. This fixture will not work nor be Dark Sky compliant if mounted to a horizontal surface such as the ground or ceiling.
    • Fixture comes standard with angled glare shield and Sure Aim accessory
    • Knuckle can be angled from 0o  (straight down) to a maximum of 30o from vertical
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 799 max
    CCT 1000K (Red-Orange, 630nm)
    1500K (Amber, 595nm)
    2700K
    3000K
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 7.3" (18.4 cm)
     
    View Details Details Quick View
  • E16-30-BGS-SA Directionals

    E16-30-BGS-SA-WL Turtle Friendly
    Down Only / Dark Sky
    (12V Integrated LED)

    Solid Brass, All-purpose, Low-voltage LED Directional The E16-30-BGS-SA-WL is a low-voltage directional luminaire with an integrated, replaceable LED light engine.
    • Directional downlight certified by International Dark Sky Association when mounted on VERTICAL surface and aimed downward. This fixture will not work nor be Dark Sky compliant if mounted to a horizontal surface such as the ground or ceiling.
    • Fixture comes standard with angled glare shield and Sure Aim accessory
    • Knuckle can be angled from 0o  (straight down) to a maximum of 30o from vertical
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 372 max
    CCT 1000K (Red-Orange, 630nm)
    1500K (Amber, 595nm)
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 7.3" (18.4 cm)
     
    View Details Details Quick View
  • E17 Dims Turtle Friendly E17 Top Turtle Friendly

    E17 Turtle Friendly
    (12V Integrated LED & MR16 LED)

    Solid Brass, Low-profile Marker Light
    • Remote transformer required
    • In-ground or concrete installation
    Voltage 12 Volts AC / DC
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K  (DarkSky approved)
    Dimensions 3.5″ diameter x 5.3” depth [8.9 x 13.5 cm]
    3.8″ [9.6 cm] trim ring outer diameter
     
    E17 Four-Sector Illumination (standard)
    E17-1 Single-Sector Illumination
    E17-2 Two-Sector, Adjacent Illumination
    E17-OP Two-Sector, Opposite Illumination
    View Details Details Quick View
  • E16-30-BGS-SA Directionals

    L-011-30-BGS-SA-WL Turtle Friendly
    Down Only / Dark Sky
    (12V/120V MR16 LED)

    Solid Brass, All-Purpose Directional
    • Directional downlight certified by International Dark Sky Association when mounted on VERTICAL surface and aimed downward. This fixture will not work nor be Dark Sky compliant if mounted to a horizontal surface such as the ground or ceiling.
    • Fixture comes standard with angled glare shield and Sure Aim accessory
    • Knuckle can be angled from 0o  (straight down) to a maximum of 30o from vertical
    • Remote transformer required for 12V
    Voltage 12V, 120V
    Lamps MR16 LED
    Lumens 79 max
    CCT 1500K
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 7.3″ (18.4 cm)
     
    View Details Details Quick View
  • L-011-cm-bgs Turtle Friendly L-011-cm Turtle Friendly

    L-011-CM Turtle Friendly
    (12V Integrated LED, 12/120/230V MR16 LED)

    Solid Brass Fixed Downlight
    • Lamp is recessed for glare reduction
    • Remote transformer required for 12V
    Voltage 12V, 120V, 230V
    Lamps Integrated LED, MR16 LED
    Lumens 338 max (8W)
    CCT 1000K
    1500K
    Dimensions 2.4" dia. body x 4.75" dia. base x 4.7″ (6 x 12.1 x 12 cm)
    View Details Details Quick View
  • L-012 Turtle Friendly2 L-012 Turtle Friendly

    L-012 Turtle Friendly
    (12V MR16 LED)

    Recessed Cast Brass Steplight The L-012 is a recessed, low-voltage steplight that uses an MR16 lamp and is available with clear, frosted, and rectilinear spread glass lenses.
    • Remote transformer required
    • Suitable for combustible and non-combustible mounting surfaces
    • Suitable for indoor or outdoor use
    Voltage 12V AC/DC
    Lamps MR16 LED
    CCT 1500
    Dimensions Faceplate: 4.4″ dia. x 2.1″ extension (11.2 x 5.3 cm)
    PVC rough-in housing: 2-7/8″ dia. x 5.1″ deep (7.3 x 13 cm)
    View Details Details Quick View
905 Kalanianaole Hwy. Spc. 2901
Kailua, HI 96734 USA
Chamber of Hawaii Member
Toll Free (800) 405-6732
Oahu (808) 263-5717
Fax (808) 263-7961

Beachside Lighting is an ongoing corporate sponsor of the Hawaii and Florida chapters of the American Society of Landscape Architects.

america society of landscape architects Hawaiiamerica society of landscape architects Florida

Office Hours

Monday - Friday
6:30am - 3:00pm (HST)
Privacy Policy | Request Catalog
©  |   All Rights Reserved | Designed by LIONHEART Web Design
Go to Top