• Brass & Composite In-Ground Pathlight for High Traffic & Drive-Over Applications The L-017 series in-ground drive-over fixtures are brass & composite pathlights for high-traffic areas. This low-profile fixture is ideal for paths with low ground cover and along pathways used by golf carts, service trucks, or automobiles at country clubs & resorts.
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring diameter is 6.7″ (17cm) and exposed height reduces to 1.7″ (4.2 cm).   [L-017-CR, L-017-C-CR]
    • Remote transformer required for 12V
    Voltage 12V, 120v, 230V
    Lamps MR16 LED
    CCT 1500K (DarkSky approved)
    3000K
    Dimensions 6.5″ dia. x 1.9″ exposed height (16.5 x 4.9 cm)
  • Solid Brass Round Uplight
    • Can be used as an uplight, steplight, or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens 206 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2.17″ dia. x 3.14" depth (5.5 x 8 cm)
    Depth: 3.14″ (8.0cm)
  • Solid Brass Low-Profile Marker Light
    • Remote transformer required
    Voltage 12 Volts AC/DC with integral driver (9-15V input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens max 5.6
    CCT 1000K
    1500K (DarkSky approved)
    Dimensions Dome diameter: 2.19" [5.6 cm]
    Depth: 3.14" [8.0 cm]
     
    E3-M Four-Sector Illumination (standard)
    E3-M-1 Single-Sector Illumination
    E3-M-2 Two-Sector, Adjacent Illumination
    E3-M-OP Two-Sector, Opposite Illumination
  • Solid Brass Round Louvered Steplight
    • Can be used as an uplight, steplight, or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens 10.7 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2.17″ dia. x 3.14" depth (5.5 x 8 cm)
  • Solid Brass Round Louvered Steplight
    • Can be used as an steplight or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    CCT 1000K
    1500K
    Dimensions 2.17″ dia. x 3.14" depth (5.5 x 8 cm)
  • Solid Brass Square Louvered Steplight
    • Can be used as an steplight or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    CCT 1000K
    1500K
    Dimensions 2.17″ square x 3.14" depth (5.5 x 8 cm)
  • Solid Brass Round Louvered Steplight
    • Remote transformer required
    • Mountable as a steplight or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring diameter is 3.8″ (9.6 cm) and fixture depth increases to 5.3″ (13.5 cm).   [E9-RL-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    Dimensions 3.5" trim dia. x 5.0" depth (8.9 x 12.6 cm)
  • Solid Brass Rectangular Louvered Steplight
    • Remote transformer required
    • Mountable as a steplight or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring is 3.3 x 4.3″ (8.3 x 10.9 cm) and fixture depth increases to 5.3″ (13.5 cm).   [E9-RCL-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    Dimensions 3 x 4" trim, 5.0" depth (7.6 x 10.2 cm, 12.6 cm)
  • Solid Brass Square Louvered Steplight
    • Remote transformer required
    • Mountable as a steplight or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring is 4.3″ square (10.9 cm) and fixture depth increases to 5.3″ (13.5 cm).   [E9-SQL-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    Dimensions 4" square trim x 5.0" depth (10 x 12.6 cm)
  • Solid Brass, Low-profile Marker Light
    • Remote transformer required
    • In-ground or concrete installation
    Voltage 12 Volts AC / DC
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K  (DarkSky approved)
    Dimensions 3.5″ diameter x 5.3” depth [8.9 x 13.5 cm]
    3.8″ [9.6 cm] trim ring outer diameter
     
    E17 Four-Sector Illumination (standard)
    E17-1 Single-Sector Illumination
    E17-2 Two-Sector, Adjacent Illumination
    E17-OP Two-Sector, Opposite Illumination
  • Recessed Cast Brass Steplight The L-012 is a recessed, low-voltage steplight that uses an MR16 lamp and is available with clear, frosted, and rectilinear spread glass lenses.
    • Remote transformer required
    • Suitable for combustible and non-combustible mounting surfaces
    • Suitable for indoor or outdoor use
    Voltage 12V AC/DC
    Lamps MR16 LED
    CCT 1500
    Dimensions Faceplate: 4.4″ dia. x 2.1″ extension (11.2 x 5.3 cm)
    PVC rough-in housing: 2-7/8″ dia. x 5.1″ deep (7.3 x 13 cm)
  • Solid Brass Square Uplight
    • Can be used as an uplight, steplight, or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens 206 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2.17″ square x 3.14" depth (5.5 x 8 cm)
  • Solid Brass Square Louvered Steplight
    • Can be used as an uplight, steplight, or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens 15.4 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2.17″ square x 3.14" depth (5.5 x 8 cm)
  • Solid Brass Round Louvered Steplight
    • Remote transformer required
    • Mountable as a steplight, uplight, or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring diameter is 3.8″ (9.6 cm) and fixture depth increases to 5.3″ (13.5 cm).   [E9-RL-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 3.5" trim dia. x 5.0" depth (8.9 x 12.6 cm)
  • Solid Brass Rectangular Louvered Steplight
    • Remote transformer required
    • Mountable as a steplight, uplight, or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring is 3.3 x 4.3″ (8.3 x 10.9 cm) and fixture depth increases to 5.3″ (13.5 cm).   [E9-RCL-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 3 x 4" trim, 5.0" depth (7.6 x 10.2 cm, 12.6 cm)
  • Solid Brass Square Louvered Steplight
    • Remote transformer required
    • Mountable as a steplight, uplight, or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring is 4.3″ square (10.9 cm) and fixture depth increases to 5.3″ (13.5 cm).   [E9-SQL-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 4" square trim x 5.0" depth (10 x 12.6 cm)
  • Recessed Cast Brass Steplight The L-012 is a recessed, low-voltage steplight that uses MR16 lamps and is available with clear, frosted, and rectilinear spread glass lenses.
    • Remote transformer required
    • Suitable for combustible and non-combustible mounting surfaces
    • Suitable for indoor or outdoor use
    Voltage 12V AC/DC
    Lamps MR16 LED
    Lumens 525 max
    CCT 1500
    2700
    3000
    Dimensions Faceplate: 4.4″ dia. x 2.1″ extension (11.2 x 5.3 cm)
    PVC rough-in housing: 2-7/8″ dia. x 5.1″ deep (7.3 x 13 cm)
  • L-016:  New Construction L-016R:  Remodel
    • Rotation ring and angling bracket allow aiming in any direction
    • Cast brass trim
    • Suitable for wet locations
    • Suitable for indoor use when equipped with integrated light engine
    Voltage 12V with integral magnetic transformer
    Lamps Integrated LED, MR16 LED
    Lumens 678 max
    CCT 1000K
    1500K
    2700K
    3000K
    Faceplate Dimensions 5" dia x 0.8" high (12.7 x 2.1 cm)
  • L-016:  New Construction L-016R:  Remodel
    • Rotation ring and angling bracket allow aiming in any direction
    • Cast brass trim
    • Suitable for wet locations
    • Suitable for indoor use when equipped with integrated light engine
    Voltage 12V with integral magnetic transformer
    Lamps Integrated LED, MR16 LED
    Lumens 212 max
    CCT 1000K
    1500K
    Faceplate Dimensions 5" dia x 0.8" high (12.7 x 2.1 cm)
  • L-016-F:  New Construction L-016R-F:  Remodel
    • Rotation ring and angling bracket allow aiming in any direction
    • FLAT ROUND brass trim
    • Suitable for wet locations
    • Suitable for indoor use when equipped with integrated light engine
    Voltage 12V with integral magnetic transformer
    Lamps Integrated LED, MR16 LED
    Lumens 678 max
    CCT 1000K
    1500K
    2700K
    3000K
    Faceplate Dimensions 5" dia x 0.2" thick (12.7 x 0.4 cm)
  • L-016-F:  New Construction L-016R-F:  Remodel
    • Rotation ring and angling bracket allow aiming in any direction
    • FLAT ROUND brass trim
    • Suitable for wet locations
    • Suitable for indoor use when equipped with integrated light engine
    Voltage 12V with integral magnetic transformer
    Lamps Integrated LED, MR16 LED
    Lumens 212 max
    CCT 1000K
    1500K
    Faceplate Dimensions 5" dia x 0.2" thick (12.7 x 0.4 cm)
  • L-016-SQ:  New Construction L-016R-SQ:  Remodel
    • Rotation ring and angling bracket allow aiming in any direction
    • FLAT SQUARE brass trim
    • Suitable for wet locations
    • Suitable for indoor use when equipped with integrated light engine
    Voltage 12V with integral magnetic transformer
    Lamps Integrated LED, MR16 LED
    Lumens 678 max
    CCT 1000K
    1500K
    2700K
    3000K
    Faceplate Dimensions 5" square x 0.2" thick (12.7 x 0.4 cm)
  • L-016-SQ:  New Construction L-016R-SQ:  Remodel
    • Rotation ring and angling bracket allow aiming in any direction
    • FLAT SQUARE brass trim
    • Suitable for wet locations
    • Suitable for indoor use when equipped with integrated light engine
    Voltage 12V with integral magnetic transformer
    Lamps Integrated LED, MR16 LED
    Lumens 212 max
    CCT 1000K
    1500K
    Faceplate Dimensions 5" square x 0.2" thick (12.7 x 0.4 cm)
  • Brass & Composite In-Ground Pathlight for High Traffic & Drive-Over Applications The L-017 series in-ground drive-over fixtures are brass & composite pathlights for high-traffic areas. This low-profile fixture is ideal for paths with low ground cover and along pathways used by golf carts, service trucks, or automobiles at country clubs & resorts.
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring diameter is 6.7″ (17cm) and exposed height reduces to 1.7″ (4.2 cm).   [L-017-CR, L-017-C-CR]
    • Remote transformer required for 12V
    Voltage 12V, 120v, 230V
    Lamps MR16 LED
    CCT 1500K
    Dimensions 6.5″ dia. x 1.9″ exposed height (16.5 x 4.9 cm)
  • Cast Brass Recessed Steplight Beachside Lighting's L-018 rectangular recessed solid brass step light is a marine grade landscape lighting fixture ideal for illumination of stairs, steps, and hardscapes.  It uses MR16 lamps and has a minimal extension from the wall.  Shown with Nickel finish.
    • Remote transformer required for 12V
    • Durable construction—cast brass components
    • Louvers angled to 30° to eliminate glare
    • Non-combustible (masonry) installation only
    Voltage 12V, 120V
    Lamps MR16 LED
    Lumens 11 max
    CCT 1500K
    Dimensions 3.3" x 5.3" x 5" deep (8.3 x 13.3 x 12.6 cm)
  • Solid Brass Steplight FFWCC Wildlife Certification # 2018-029  
    Voltage 100-277V
    Lamps LED module w/integral driver
    Lumens max 0.4
    CCT 1700K
    Dimensions Trim: 3 x 4″ (7.5 x 12.1 cm)
    Depth with faceplate: 1.8″ (4.7 cm)
  • Solid Brass Steplight The STL is a compact steplight that utilizes a standard single-gang junction box.
    Voltage 120V (dimmable), 100-277V (non-dimmable)
    Lamps Integrated LED
    Lumens 14 max
    CCT 1700K
    3000K
    Dimensions Trim size: 3 x 4 x 0.34″ (7.5 x 12.1 x 0.9 cm)
    Junction Box depth: 2.2″ (5.6 cm)
Go to Top