• Solid Brass, Low-Voltage, Stem-Mounted Path Light
    • Ideal for walkways and tall groundcover
    • Remote transformer required
    • Custom stem lengths available
    Voltage 12 Volts AC with integral driver (9 – 15V input, dimmable below 9V)
    Lamps Integrated LED
    Lumens max 98
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions Lamp Housing: 1.6” diameter x 3.1"  [4.2 x 7.8 cm]
     
  • Brass Bell-Type Pathlight The L-004 is a bell-type path light made from brass and copper.  Ideal for walkway and area lighting in any landscape theme and location.
    • Remote transformer required
    • Durable construction: all brass components with copper bell shade
    • CSA Listed to US and Canadian safety standards, file #190030
    Voltage 12V AC
    Lamps LED
    CCT 2700
    3000
    Dimensions 23 inch (58.4cm) overall height
  • Beachside Lighting’s M-Series Pathlights are the ultimate in heavy-duty landscape lighting.  Made of cast brass, these fixtures are larger than other Beachside pathlights.  The omnidirectional LED lamp is protected by a threaded glass lens.  Louvers are angled at 45° to eliminate glare.  Risers are schedule 80 brass pipe.  A single-louver design also is available for use with an integrated light engine or drop-in MR16 LED. M-series pathlights with amber and red-orange LED lamps are certified as “Wildlife Friendly” by the Florida Fish & Wildlife Conservation Commission.  To view these fixtures click HERE.
    • Durable construction: all brass components
    • Stems available in three sizes: 16″, 20″ (standard), & 24
    • CSA Listed to US and Canadian safety standards, file #190030
    Voltage 12V, 120V
    Lamps LED
    CCT 1500
    2700
    3000
     
  • Beachside Lighting’s M-Series LED Pathlights are the ultimate in heavy-duty landscape lighting.  Made of cast brass, these fixtures are larger than other Beachside pathlights.  The lamp is protected by a threaded glass lens.  Louvers are angled at 45° to eliminate glare.  Risers are schedule 80 brass pipe.  M-series fixtures with a single-louver design use directional LED sources with a reflector.  A traditional multi-louver design also is available with omnidirectional LED light sources. M-series pathlights with amber and red-orange LED lamps are certified as “Wildlife Friendly” by the Florida Fish & Wildlife Conservation Commission.  To view these fixtures click HERE.
    • Durable construction: all brass components
    • Stems available in three sizes: 16″, 20″ (standard), & 24
    • CSA Listed to US and Canadian safety standards, file #190030
    Voltage 12V, 120V, 230V
    Lamps Integrated LED, MR16 LED
    CCT 1000
    1500
    2700
    3000
     
  • Beachside Lighting’s R-Series Pathlights have set the standard for durability in low-voltage walkway and area lighting.  The completely sealed fixture allows easy access to the brass lamp compartment for tool-free relamping.  Features include an 18-gauge copper shade, a 5 mm-thick frosted glass lens, and a riser made from schedule 40 brass pipe.  The lamping is G4 bi-pin LED.  The omnidirectional lamping allows for a lower profile, with most shade heights positioned so their lower edge is at the bottom of the glass, resulting in low-to-no glare. All fixtures are CSA Listed to US and Canadian safety standards, file #190030.
    • 12 Volts AC
    • Remote transformer required
    • Durable construction: all brass components and copper shades
    Voltage 12V AC
    Lamps Omnidirectional LED
    CCT 1500K
    2700K
    3000K
     
  • Beachside Lighting’s R-Series LED Pathlights have set the standard for durability in low-voltage walkway and area lighting.  The completely sealed fixture allows easy access to the brass lamp compartment for tool-free relamping.  Features include an 18-gauge copper shade, a 5 mm-thick frosted glass lens, and a riser made from schedule 40 brass pipe.  The lamping is MR16 LED, allowing both 12V and 120V/230V options.  The upward-directed lamp hits a reflector in the shade assembly.  Most shade heights are positioned so their lower edge is at the bottom of the glass, resulting in low-to-no glare. All fixtures are CSA Listed to US and Canadian safety standards, file #190030.
    • Durable construction: all brass components and copper shades
    Voltage 12V, 120V, 230V
    Lamps LED
    CCT 1000K
    1500K
    2700K
    3000K
     
  • Solid Brass, Low-Voltage, Stem-Mounted Path Light
    • Ideal for walkways and tall groundcover
    • Remote transformer required
    • Custom stem lengths available
    Voltage 12 Volts AC with integral driver (9 – 15V input, dimmable below 9V)
    Lamps Integrated LED
    Lumens max 32
    CCT 1000K
    1500K
    Dimensions Lamp Housing: 1.6” diameter x 3.1"  [4.2 x 7.8 cm]
     
  • Solid Brass, Low-profile, Low-Voltage Directional
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 249
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions Diameter: 1.6″ (4.2cm)
    Overall length from knuckle pivot: 4.1″ (10.5cm)
  • Solid Brass, Low-profile, Low-Voltage Directional
    • Directional downlight certified by International Dark Sky Association when mounted on VERTICAL surface and aimed downward. This fixture will not work nor be Dark Sky compliant if mounted to a horizontal surface such as the ground or ceiling.
    • Fixture comes standard with angled glare shield and Sure Aim accessory
    • Knuckle can be angled from 0° (straight down) to a maximum of 30° from vertical
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 249
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions Diameter: 1.6″ (4.2cm)
    Overall length from knuckle pivot: 5.9″ (13.9cm)
     
  • Solid Brass, Low-profile, Low-Voltage Directional
    • Directional downlight certified by International Dark Sky Association when mounted on VERTICAL surface and aimed downward. This fixture will not work nor be Dark Sky compliant if mounted to a horizontal surface such as the ground or ceiling.
    • Fixture comes standard with angled glare shield and Sure Aim accessory
    • Knuckle can be angled from 0° (straight down) to a maximum of 30° from vertical
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 123 max
    CCT 1000K
    1500K
    Dimensions Diameter: 1.6″ (4.2cm)
    Overall length from knuckle pivot: 5.9″ (13.9cm)
     
  • Solid Brass, Low-profile, Low-voltage Double Directional on Brass Riser
    • Can be aimed up or down
    • Ideal for tall groundcover
    Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 249
    CCT 1000
    1500
    2700
    3000
    Dimensions Diameter: 1.6″ (4.2cm)
    Overall length from knuckle pivot: 4.1″ (10.5cm)
  • Solid Brass, All-purpose, Low-voltage LED Directional The E16 is a low-voltage directional luminaire with an integrated, replaceable LED light engine.  The light engine features four output settings from 100% to 25%, adjustable in the field.
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 799 max
    CCT 1000K (Red-Orange, 630nm)
    1500K (Amber, 595nm)
    2700K
    3000k
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 4.9" (12.4 cm)
  • Solid Brass, All-purpose, Low-voltage LED Directional The E16-30-BGS-SA is a low-voltage directional luminaire with an integrated, replaceable LED light engine.  The warm white light engines features four output settings from 100% to 25%, adjustable in the field.
    • Directional downlight certified by International Dark Sky Association when mounted on VERTICAL surface and aimed downward. This fixture will not work nor be Dark Sky compliant if mounted to a horizontal surface such as the ground or ceiling.
    • Fixture comes standard with angled glare shield and Sure Aim accessory
    • Knuckle can be angled from 0 (straight down) to a maximum of 30o from vertical
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 799 max
    CCT 1000K (Red-Orange, 630nm)
    1500K (Amber, 595nm)
    2700K
    3000K
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 7.3" (18.4 cm)
     
  • Solid Brass, All-purpose, Low-voltage LED Directional The E16-30-BGS-SA-WL is a low-voltage directional luminaire with an integrated, replaceable LED light engine.
    • Directional downlight certified by International Dark Sky Association when mounted on VERTICAL surface and aimed downward. This fixture will not work nor be Dark Sky compliant if mounted to a horizontal surface such as the ground or ceiling.
    • Fixture comes standard with angled glare shield and Sure Aim accessory
    • Knuckle can be angled from 0 (straight down) to a maximum of 30o from vertical
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 372 max
    CCT 1000K (Red-Orange, 630nm)
    1500K (Amber, 595nm)
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 7.3" (18.4 cm)
     
  • Solid Brass, All-Purpose Directional
    • Directional downlight certified by International Dark Sky Association when mounted on VERTICAL surface and aimed downward. This fixture will not work nor be Dark Sky compliant if mounted to a horizontal surface such as the ground or ceiling.
    • Fixture comes standard with angled glare shield and Sure Aim accessory
    • Knuckle can be angled from 0 (straight down) to a maximum of 30o from vertical
    • Remote transformer required for 12V
    Voltage 12V, 120V
    Lamps MR16 LED
    Lumens 79 max
    CCT 1500K
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 7.3″ (18.4 cm)
     
  • Solid Brass, All-purpose, Low-voltage LED Double Directional on Brass Riser The E16-S is a low-voltage, double-directional luminaire with integrated, replaceable LED light engines.  The light engines features four output settings from 100% to 25%, adjustable in the field.
    • Can be aimed up or down
    • Ideal for tall groundcover
    • Remote transformer required.
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 799 max
    CCT 1000K (Red-Orange, 630nm)
    1500K (Amber, 595nm)
    2700K
    3000k
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 4.9" (12.4 cm)
  • Solid Brass, All-Purpose Directional
    • Lamp is recessed for glare reduction on 12V unshielded versions
    • Stepped glass allows flush surface to prevent collection of dirt/debris
    • Angled and full cutoff glare shields available
    • Remote transformer required for 12V
    Voltage 12V, 120V, 230V
    Lamps MR16 LED
    Lumens 630 max
    CCT 1500K
    2700K
    3000K
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 4.9″ (12.4 cm)
  • Solid Brass, All-Purpose Directional
    • Directional downlight certified by International Dark Sky Association when mounted on VERTICAL surface and aimed downward. This fixture will not work nor be Dark Sky compliant if mounted to a horizontal surface such as the ground or ceiling.
    • Fixture comes standard with angled glare shield and Sure Aim accessory
    • Knuckle can be angled from 0 (straight down) to a maximum of 30o from vertical
    • Remote transformer required for 12V
    Voltage 12V, 120V, 230V
    Lamps MR16 LED
    Lumens 630 max
    CCT 1500K
    2700K
    3000K
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 7.3″ (18.4 cm)
     
  • Brass Double Directional on Riser The L-011-S2 is a double directional directional luminaire on a brass riser for use with MR16 drop-in lamps.
    • Can be aimed up or down.
    • Ideal for tall groundcover.
    • Lamps are recessed for glare reduction on 12V unshielded versions.  Ideal for lamps with a maximum beam spread of 60°.
    • L-011-S2-WA (wide angle) version available with lamp positioning closer to glass for lamps greater than 60° (unshielded 12V versions only).
    Voltage 12V, 120V, 230V
    Lamps MR16 LED
    Lumens 630 max
    CCT 1500K
    2700K
    3000K
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 4.9″ (12.4 cm)
  • FFWCC Wildlife Certification # 2018-029 Beachside Lighting’s M-Series LED Pathlights are the ultimate in heavy-duty landscape lighting.  Made of cast brass, these fixtures are larger than other Beachside pathlights.  The lamp is protected by a threaded glass lens.  Risers are schedule 80 brass pipe.
    • Remote transformer required for 12V
    • Durable construction: all brass components
    • Stems available in three sizes: 16″, 20″ (standard), & 24
    • CSA Listed to US and Canadian safety standards, file #190030
    Voltage 12V, 120V, 230V
    Lamps Integrated LED, MR16 LED
    CCT 1000
    1500
  • FFWCC Wildlife Certification # 2018-029 Beachside Lighting’s M-Series LED Pathlights are the ultimate in heavy-duty landscape lighting.  Made of cast brass, these fixtures are larger than other Beachside pathlights.  The lamp is protected by a threaded glass lens.  Risers are schedule 80 brass pipe.
    • Remote transformer required for 12V
    • Durable construction: all brass components
    • Stems available in three sizes: 16″, 20″ (standard), & 24
    • CSA Listed to US and Canadian safety standards, file #190030
    Voltage 12V, 120V, 230V
    Lamps Integrated LED, MR16 LED
    CCT 1000
    1500
  • FFWCC Wildlife Certification # 2018-029 Beachside Lighting’s M-Series LED Pathlights are the ultimate in heavy-duty landscape lighting.  Made of cast brass, these fixtures are larger than other Beachside pathlights.  The lamp is protected by a threaded glass lens.  Risers are schedule 80 brass pipe.
    • Remote transformer required for 12V
    • Durable construction: all brass components
    • Stems available in three sizes: 16″, 20″ (standard), & 24
    • CSA Listed to US and Canadian safety standards, file #190030
    Voltage 12V, 120V, 230V
    Lamps Integrated LED, MR16 LED
    CCT 1000
    1500
  • FFWCC Wildlife Certification # 2018-029 Beachside Lighting’s M-Series LED Pathlights are the ultimate in heavy-duty landscape lighting.  Made of cast brass, these fixtures are larger than other Beachside pathlights.  The lamp is protected by a threaded glass lens.  Risers are schedule 80 brass pipe.
    • Remote transformer required for 12V
    • Durable construction: all brass components
    • Stems available in three sizes: 16″, 20″ (standard), & 24
    • CSA Listed to US and Canadian safety standards, file #190030
    Voltage 12V, 120V, 230V
    Lamps Integrated LED, MR16 LED
    CCT 1000
    1500
  • FFWCC Wildlife Certification # 2018-029 Beachside Lighting’s M-Series LED Pathlights are the ultimate in heavy-duty landscape lighting.  Made of cast brass, these fixtures are larger than other Beachside pathlights.  The lamp is protected by a threaded glass lens.  Risers are schedule 80 brass pipe.
    • Remote transformer required for 12V
    • Durable construction: all brass components
    • Stems available in three sizes: 16″, 20″ (standard), & 24
    • CSA Listed to US and Canadian safety standards, file #190030
    Voltage 12V, 120V, 230V
    Lamps Integrated LED, MR16 LED
    CCT 1000
    1500
  • The R-021 is a low-voltage brass fixture for the illumination of decorative lanterns or as a stand-alone fixture.  Often used with Bali, Japanese, or pagoda-type wood or stone lanterns.
    • 1/2" male threads for mounting to standard j-box or mounting accessories
    • Optional stem available in 4" increments
    • Remote transformer required
    Voltage 12V AC
    Lamps G4 LED
    CCT 1500K
    2700K
    3000K
    Dimensions 2.4" dia. x 2.9" tall [6 x 7.4 cm]
    Optional Base is 4.1" dia. x 1.0" tall [10.5 x 2.5 cm]
  • FFWCC Wildlife Certification # 2018-029 Beachside Lighting’s R-Series Pathlights have set the standard for durability in low-voltage walkway and area lighting.  The completely sealed fixture allow easy access to the brass lamp compartment for tool-free relamping. Features include an 18-gauge copper shade, a 5mm thick frosted glass lens, and a riser made of schedule 40 brass pipe.  Available stem heights are 2, 8, 12, 16, and 20 inches (2" is standard—and offered only—on R19 & R-019).  Custom heights are available. Note that the R-Series pathlights have different photometrics as indicated on their individual specification sheets.
    • R19 (long body, left image) uses MR16 lamp
    • R-019 (short body, right image) uses 12V G4 lamp only, remote transformer required
    • Durable construction: all brass components and copper shades
    • CSA Listed to US and Canadian safety standards, file # 190030
    Voltage R19: 12V, 120V, 230V
    R-019: 12V
    Lamps G4 LED, MR16 LED
    CCT 1000K
    1500K
     
  • FFWCC Wildlife Certification # 2018-029 Beachside Lighting’s R-Series Pathlights have set the standard for durability in low-voltage walkway and area lighting.  The completely sealed fixture allow easy access to the brass lamp compartment for tool-free relamping. Features include an 18-gauge copper shade, a 5mm thick frosted glass lens, and a riser made of schedule 40 brass pipe.  Available stem heights are 8, 12, 16, and 20 inches (12" standard).  Custom heights are available. Note that the R-Series pathlights have different photometrics as indicated on their individual specification sheets.
    • R3 (long body, left image) uses MR16 lamp
    • R-003 (short body, right image) uses 12V G4 lamp only, remote transformer required
    • Durable construction: all brass components and copper shades
    • CSA Listed to US and Canadian safety standards, file # 190030
    Voltage R3: 12V, 120V, 230V
    R-003: 12V
    Lamps G4 LED, MR16 LED
    CCT 1000K
    1500K
     
  • FFWCC Wildlife Certification # 2018-029 Beachside Lighting’s R-Series Pathlights have set the standard for durability in low-voltage walkway and area lighting.  The completely sealed fixture allow easy access to the brass lamp compartment for tool-free relamping. Features include an 18-gauge copper shade, a 5mm thick frosted glass lens, and a riser made of schedule 40 brass pipe.  Available stem heights are 8, 12, 16, and 20 inches (12" standard).  Custom heights are available. Note that the R-Series pathlights have different photometrics as indicated on their individual specification sheets.
    • R3A (long body, left image) uses MR16 lamp
    • R-003A (short body, right image) uses 12V G4 lamp only, remote transformer required
    • Durable construction: all brass components and copper shades
    • CSA Listed to US and Canadian safety standards, file # 190030
    Voltage R3A: 12V, 120V, 230V
    R-003A: 12V
    Lamps G4 LED, MR16 LED
    CCT 1000K
    1500K
     

Title

Go to Top