• Solid Brass, All-Purpose, Low-Voltage LED Canopy-Mounted Directional The E16 is a low-voltage directional luminaire with an integrated, replaceable LED light engine.  The light engine features four output settings from 100% to 25%, adjustable in the field.
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 799 max
    CCT 1000K (Red-Orange, 630nm)
    1500K (Amber, 595nm)
    2700K
    3000k
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 4.9" (12.4 cm)
  • Solid Brass, All-purpose, Low-voltage LED Directional The E16 is a low-voltage directional luminaire with an integrated, replaceable LED light engine.  The light engine features four output settings from 100% to 25%, adjustable in the field.
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 799 max
    CCT 1000K (Red-Orange, 630nm)
    1500K (Amber, 595nm)
    2700K
    3000k
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 4.9" (12.4 cm)
  • Solid Brass, All-purpose, Low-voltage LED Directional The E16-30-BGS-SA is a low-voltage directional luminaire with an integrated, replaceable LED light engine.  The warm white light engines features four output settings from 100% to 25%, adjustable in the field.
    • Directional downlight certified by International Dark Sky Association when mounted on VERTICAL surface and aimed downward. This fixture will not work nor be Dark Sky compliant if mounted to a horizontal surface such as the ground or ceiling.
    • Fixture comes standard with angled glare shield and Sure Aim accessory
    • Knuckle can be angled from 0 (straight down) to a maximum of 30o from vertical
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 799 max
    CCT 1000K (Red-Orange, 630nm)
    1500K (Amber, 595nm)
    2700K
    3000K
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 7.3" (18.4 cm)
     
  • Solid Brass, All-purpose, Low-voltage LED Directional The E16-30-BGS-SA-WL is a low-voltage directional luminaire with an integrated, replaceable LED light engine.
    • Directional downlight certified by International Dark Sky Association when mounted on VERTICAL surface and aimed downward. This fixture will not work nor be Dark Sky compliant if mounted to a horizontal surface such as the ground or ceiling.
    • Fixture comes standard with angled glare shield and Sure Aim accessory
    • Knuckle can be angled from 0 (straight down) to a maximum of 30o from vertical
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 372 max
    CCT 1000K (Red-Orange, 630nm)
    1500K (Amber, 595nm)
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 7.3" (18.4 cm)
     
  • Solid Brass, Low-Voltage Hanging Downlight
    • Supplied with 20″ stainless steel cable, 36″ lead wire, and 1/2″ male fitting for mounting accessory
    • Can also be hung directly by loop
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 799 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2.4″ dia. x  4.2" (6 x 10.6 cm)
  • Solid Brass, All-Purpose Directional
    • Directional downlight certified by International Dark Sky Association when mounted on VERTICAL surface and aimed downward. This fixture will not work nor be Dark Sky compliant if mounted to a horizontal surface such as the ground or ceiling.
    • Fixture comes standard with angled glare shield and Sure Aim accessory
    • Knuckle can be angled from 0 (straight down) to a maximum of 30o from vertical
    • Remote transformer required for 12V
    Voltage 12V, 120V
    Lamps MR16 LED
    Lumens 79 max
    CCT 1500K
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 7.3″ (18.4 cm)
     
  • Solid Brass Fixed Downlight
    • Lamp is recessed for glare reduction
    • Remote transformer required for 12V
    Voltage 12V, 120V, 230V
    Lamps Integrated LED, MR16 LED
    Lumens 338 max (8W)
    CCT 1000K
    1500K
    Dimensions 2.4" dia. body x 4.75" dia. base x 4.7″ (6 x 12.1 x 12 cm)
     
  • Wall-Mounted Brass Downlight
    • Remote transformer required for 12V
    • Certified for indoor (12V) or outdoor use
    Voltage 12V, 120V, 230V
    Lamps Integrated LED light engine, MR16 LED
    Lumens 372 max
    CCT 1000K
    1300K
    1500K
    Dimensions 5.9"/14.9 cm tall (MR16), 6.6"/16.8 cm tall (light engine)
    2.4" dia lamp body x 3.7" extension from wall (6 x 9.3 cm)
     
  • Solid Brass, All-purpose, Low-voltage LED Double Directional on Brass Riser The E16-S is a low-voltage, double-directional luminaire with integrated, replaceable LED light engines.  The light engines features four output settings from 100% to 25%, adjustable in the field.
    • Can be aimed up or down
    • Ideal for tall groundcover
    • Remote transformer required.
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 799 max
    CCT 1000K (Red-Orange, 630nm)
    1500K (Amber, 595nm)
    2700K
    3000k
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 4.9" (12.4 cm)
  • Solid Brass, All-Purpose Directional
    • Lamp is recessed for glare reduction on 12V unshielded versions
    • Stepped glass allows flush surface to prevent collection of dirt/debris
    • Angled and full cutoff glare shields available
    • Remote transformer required for 12V
    Voltage 12V, 120V, 230V
    Lamps MR16 LED
    Lumens 630 max
    CCT 1500K
    2700K
    3000K
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 4.9″ (12.4 cm)
  • Solid Brass, All-Purpose Directional
    • Directional downlight certified by International Dark Sky Association when mounted on VERTICAL surface and aimed downward. This fixture will not work nor be Dark Sky compliant if mounted to a horizontal surface such as the ground or ceiling.
    • Fixture comes standard with angled glare shield and Sure Aim accessory
    • Knuckle can be angled from 0 (straight down) to a maximum of 30o from vertical
    • Remote transformer required for 12V
    Voltage 12V, 120V, 230V
    Lamps MR16 LED
    Lumens 630 max
    CCT 1500K
    2700K
    3000K
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 7.3″ (18.4 cm)
     
  • Solid Brass Fixed Downlight
    • Lamp is recessed for glare reduction
    • Remote transformer required for 12V
    Voltage 12V, 120V, 230V
    Lamps Integrated LED, MR16 LED & Halogen
    Lumens 791 max (11W)
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2.4" dia. body x 4.75" dia. base x 4.7″ (6 x 12.1 x 12 cm)
     
  • Solid Brass Canopy-Mounted Directional
    • Lamp is recessed for glare reduction on 12V unshielded versions
    • Remote transformer required for 12V
    Voltage 12V, 120V, 230V
    Lamps MR16 LED
    Lumens 630 max
    CCT 1500K
    2700K
    3000K
    Dimensions Diameter: 2.4" (6 cm)
    Length from knuckle pivot: 4.9″ (12.4 cm)
  • Solid Brass Canopy-Mounted Double Directional
    • Lamp is recessed for glare reduction on 12V unshielded versions
    • Remote transformer required for 12V
    Voltage 12V, 120V, 230V
    Lamps MR16 LED
    Lumens 630 max (per lamp)
    CCT 1500K
    2700K
    3000K
    Dimensions Diameter: 2.4" (6 cm)
    Length from knuckle pivot: 4.9″ (12.4 cm)
  • Solid Brass Hanging Downlight
    • Supplied with 20″ stainless steel cable, 36″ lead wire, and 1/2″ male fitting for mounting accessory
    • Can also be hung directly by loop
    • Remote transformer required
    Voltage 12V AC
    Lamps MR16 LED & Halogen
    Lumens 630 max (LED)
    CCT 1500K
    2700K
    3000K
    Dimensions 2.4″ dia. x 4.2" (6 x 10.6 cm)
  • Solid Brass Hanging Downlight with Glow Snoot
    • Supplied with 20" stainless steel cable, 36" lead wire, and 1/2" male fitting for mounting accessory
    • Also can be hung directly by loop
    • Remote transformer required
    Voltage 12V AC
    Lamps MR16 LED & Halogen
    Lumens 630 max (LED)
    CCT 1500K
    2700K
    3000K
    Dimensions 2.4″ dia. x 8.4" (6 x 21.3 cm)
  • Solid Brass, All-Purpose, Low-Voltage Directional with Extended Snoot — Downlighting Applications Only For uplighting applications, use standard L-011 with BGSF full-cutoff glare shield, which has weep hole.
    • Lamp is recessed for glare reduction.  Ideal for lamps with a maximum beam spread of 40°.
    • Remote transformer required for 12V.
    Voltage 12V, 120V, 230V
    Lamps MR16 LED
    Lumens 630 max
    CCT 1500K
    2700K
    3000K
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 5.9″ (14.9 cm)
  • Brass Outdoor Gobo Pattern Projector
    • Fixture uses stainless steel gobos (51.5 mm overall diameter) to project a pattern onto ground or wall
    • Remote transformer required for 12 Volt
    Voltage 12V, 120V, 230V
    Lamps MR16 LED & Metal Halide
    CCT 2700K
    3000K
    Dimensions 2.5″ diameter (6.3 cm)
    Overall length from knuckle pivot: 5.9″ (14.9 cm) for 12 Volt, 7.8″ (19.9 cm) for 120/230 Volt
  • Ceiling-Mounted Brass Outdoor Gobo Pattern Projector Downlight
    • Fixture uses stainless steel gobos (51.5 mm overall diameter) to project a pattern onto ground or wall
    • Remote transformer required for 12 Volt
    Voltage 12V, 120V, 230V
    Lamps MR16 LED & Metal Halide
    CCT 2700K
    3000K
    Dimensions 2.5″ dia. lamp housing (6.3 cm), 4.75″ dia. canopy (12.1 cm)
    Overall height: 5.6″ (14.4 cm) for 12 Volt, 7.6″ (19.5 cm) for 120/230 Volt
  • Brass Outdoor Canopy-Mounted Gobo Pattern Projector
    • Fixture uses stainless steel gobos (51.5 mm overall diameter) to project a pattern onto ground or wall
    • Remote transformer required for 12 Volt
    Voltage 12V, 120V, 230V
    Lamps MR16 LED & Metal Halide
    CCT 2700K
    3000K
    Dimensions 2.5″ dia. lamp housing (6.3 cm), 4.75″ dia. canopy (12.1 cm)
    Overall length from knuckle pivot: 5.9″ (14.9 cm) for 12 Volt, 7.9″ (20.1 cm) for 120/230 Volt
  • Dual-Head Brass Outdoor Canopy-Mounted Gobo Pattern Projector
    • Fixture uses stainless steel gobos (51.5 mm overall diameter) to project a pattern onto ground or wall
    • Remote transformer required for 12 Volt
    Voltage 12V, 120V, 230V
    Lamps MR16 LED & Metal Halide
    CCT 2700K
    3000K
    Dimensions 2.5″ dia. lamp housing (6.3 cm), 4.75″ dia. canopy (12.1 cm)
    Overall length from knuckle pivot: 5.9″ (14.9 cm) for 12 Volt, 7.8″ (19.9 cm) for 120/230 Volt
  • Brass Hanging Projection Downlight
    • Fixture uses stainless steel gobos (51.5 mm overall diameter) to project a pattern onto ground
    • Supplied with 20″ stainless steel cable, 36″ lead wire, and 1/2″ male fitting for mounting accessory
    • Can also be hung directly by loop
    • Remote transformer required
    Voltage 12V AC
    Lamps MR16 LED
    CCT 2700K
    3000K
    Dimensions 2.5″ dia. x 5.1" (6.3 x 12.9 cm)
  • Brass Double Directional on Riser The L-011-S2 is a double directional directional luminaire on a brass riser for use with MR16 drop-in lamps.
    • Can be aimed up or down.
    • Ideal for tall groundcover.
    • Lamps are recessed for glare reduction on 12V unshielded versions.  Ideal for lamps with a maximum beam spread of 60°.
    • L-011-S2-WA (wide angle) version available with lamp positioning closer to glass for lamps greater than 60° (unshielded 12V versions only).
    Voltage 12V, 120V, 230V
    Lamps MR16 LED
    Lumens 630 max
    CCT 1500K
    2700K
    3000K
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 4.9″ (12.4 cm)
  • Wall-Mounted Brass Up-/Downlight
    • Remote transformer required for 12V
    • CSA Listed for US and Canada, file #190030
    • Certified for indoor (12V) or outdoor use
    Voltage 12V, 120V, 230V
    Lamps Integrated LED light engine, MR16 LED
    Lumens 799 max (per lamp)
    CCT 1000K
    1300K
    1500K
    2700K
    3000K
    Dimensions 8.5"/21.6 cm tall (MR16), 10"/25.3 cm tall (light engine)
    2.4" dia lamp body x 3.7" extension from wall (6 x 9.3 cm)
  • Wall-Mounted Brass Downlight
    • Remote transformer required for 12V
    • CSA Listed for US and Canada, file #190030
    • Certified for indoor (12V) or outdoor use
    Voltage 12V, 120V, 230V
    Lamps Integrated LED light engine, MR16 LED
    Lumens 799 max
    CCT 1000K
    1300K
    1500K
    2700K
    3000K
    Dimensions 5.9"/14.9 cm tall (MR16), 6.6"/16.8 cm tall (light engine)
    2.4" dia lamp body x 3.7" extension from wall (6 x 9.3 cm)
     
  • The L-021 is a brass mini bollard, ideal for high traffic applications as an alternative to path light fixtures with shades.
    • Durable construction: all brass components
    • Can be mounted on optional stems
    • Remote transformer required for 12V
    • CSA Listed to US and Canadian safety standards, file # 190030
    Voltage 12V, 120V
    Lamps MR16 LED
    CCT 1500
    3000
    Dimensions 2.4″ dia. x 7.8″ high (6 x 19.8 cm)
  • The L-023 is a sealed, wall-mounted brass fixture, ideal for backlighting of the decorative sconces or used independently.
    • Remote transformer required
    • Suitable for indoor and outdoor use
    Voltage 12V
    Lamps LED
    CCT 1500K
    2700K
    3000K
    Dimensions 2.4″ dia x 6.5″ height x 3.7″ extension from wall (6.0 x 16.6 x 9.4 cm)
  • The L-024 is a 120-Volt sealed, wall-mounted brass fixture, ideal for backlighting of the decorative sconces or used independently.
    Voltage 120V
    Lamps LED
    Lumens 636 max
    CCT 1500K
    2700K
    3000K
    Dimensions 2.4″ dia x 10.1″ height x 3.7″ extension from wall (6.0 x 25.7 x 9.4 cm)

Title

Go to Top