- Dimensions: 12″ x 7.1″ x 3.9″
Beachside wall-mounted fixtures have proven themselves for years in both covered and unprotected locations, such as the front entrance of this residence in St. Thomas, U.S. Virgin Islands, above.
-
Dark copper sconce with Bamboo design that fits over Beachside’s L-023 and L-024 backlighting fixtures
- Dimensions: 12″ x 7.1″ x 3.9″
-
Copper Malama sconce with Plumeria flower design that fits over Beachside’s L-023 and L-024 backlighting fixtures PUA-12×6 12.0″ height x 6″ width x 4" extension from wall (30.5 x 15.2 x 10.2 cm) Custom sizes available. Specify PUA – (Height in inches) x (Width in inches) Specifications
-
Copper Malama sconce with Palm Tree design that fits over Beachside’s L-023 and L-024 backlighting fixtures PLM-12×6 12.0″ height x 6″ width x 4" extension from wall (30.5 x 15.2 x 10.2 cm) Custom sizes available. Specify PLM – (Height in inches) x (Width in inches) Specifications
-
Copper Malama sconce with Bamboo design that fits over Beachside’s L-023 and L-024 backlighting fixtures OHE-12×6 12.0″ height x 6″ width x 4" extension from wall (30.5 x 15.2 x 10.2 cm) Custom sizes available. Specify OHE – (Height in inches) x (Width in inches) Specifications
-
The L-023 is a sealed, wall-mounted brass fixture, ideal for backlighting of the decorative sconces or used independently.
- Remote transformer required
- Suitable for indoor and outdoor use
Voltage 12V Lamps LED CCT 1500K 2700K 3000K Dimensions 2.4″ dia x 7.2″ height x 3.7″ extension from wall (6.0 x 18.2 x 9.4 cm) -
Wall-Mounted Brass Up-/Downlight
- Remote transformer required for 12V
- CSA Listed for US and Canada, file #190030
- Certified for indoor (12V) or outdoor use
Voltage 12V, 120V, 230V Lamps Integrated LED light engine, MR16 LED Lumens 799 max (per lamp) CCT 1000K 1300K 1500K 2700K 3000K Dimensions 8.5"/21.6 cm tall (MR16), 10"/25.3 cm tall (light engine) 2.4" dia lamp body x 3.7" extension from wall (6 x 9.3 cm) -
L-016-SQ: New Construction L-016R-SQ: Remodel
- Rotation ring and angling bracket allow aiming in any direction
- FLAT SQUARE brass trim
- Suitable for wet locations
- Suitable for indoor use when equipped with integrated light engine
Voltage 12V with integral magnetic transformer Lamps Integrated LED, MR16 LED Lumens 678 max CCT 1000K 1500K 2700K 3000K Faceplate Dimensions 5" square x 0.2" thick (12.7 x 0.4 cm) -
L-016-F: New Construction L-016R-F: Remodel
- Rotation ring and angling bracket allow aiming in any direction
- FLAT ROUND brass trim
- Suitable for wet locations
- Suitable for indoor use when equipped with integrated light engine
Voltage 12V with integral magnetic transformer Lamps Integrated LED, MR16 LED Lumens 678 max CCT 1000K 1500K 2700K 3000K Faceplate Dimensions 5" dia x 0.2" thick (12.7 x 0.4 cm) -
L-016: New Construction L-016R: Remodel
- Rotation ring and angling bracket allow aiming in any direction
- Cast brass trim
- Suitable for wet locations
- Suitable for indoor use when equipped with integrated light engine
Voltage 12V with integral magnetic transformer Lamps Integrated LED, MR16 LED Lumens 678 max CCT 1000K 1500K 2700K 3000K Faceplate Dimensions 5" dia x 0.8" high (12.7 x 2.1 cm) -
Wall-Mounted Brass Downlight
- Remote transformer required for 12V
- CSA Listed for US and Canada, file #190030
- Certified for indoor (12V) or outdoor use
Voltage 12V, 120V, 230V Lamps Integrated LED light engine, MR16 LED Lumens 799 max CCT 1000K 1300K 1500K 2700K 3000K Dimensions 5.9"/14.9 cm tall (MR16), 6.6"/16.8 cm tall (light engine) 2.4" dia lamp body x 3.7" extension from wall (6 x 9.3 cm) -
Wall-Mounted Brass Up-/Downlight with Copper Shade
- Remote transformer required for 12V
- CSA Listed for US and Canada, file #190030
- Certified for indoor (12V) or outdoor use
Voltage 12V, 120V Lamps (12V) G4 LED, GU5.3 MR16 LED Lamps (120V) G9 LED, GU10 MR16 LED Lumens 525 max (bottom) CCT 1300K 1400K 1500K 2700K 3000K Dimensions R3: 9.0" shade diameter x 9.8" height (22.9 x 24.9 cm) -
Solid Brass, All-Purpose, Low-Voltage Directional with Extended Snoot — Downlighting Applications Only For uplighting applications, use standard L-011 with BGSF full-cutoff glare shield, which has weep hole.
- Lamp is recessed for glare reduction. Ideal for lamps with a maximum beam spread of 40°.
- Remote transformer required for 12V.
Voltage 12V, 120V, 230V Lamps MR16 LED Lumens 630 max CCT 1500K 2700K 3000K Dimensions Diameter: 2.4" (6 cm) Overall length from knuckle pivot: 5.9″ (14.9 cm) -
Solid Brass Canopy-Mounted Double Directional
- Lamp is recessed for glare reduction on 12V unshielded versions
- Remote transformer required for 12V
Voltage 12V, 120V, 230V Lamps MR16 LED Lumens 630 max (per lamp) CCT 1500K 2700K 3000K Dimensions Diameter: 2.4" (6 cm) Length from knuckle pivot: 4.9″ (12.4 cm) -
Solid Brass, Low-Voltage, Directional
- Ideal for post mounting and spaces that require a low-profile directional
- Remote transformer required
Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V) Lamps Integrated LED Lumens 202 CCT 1000 1500 2700 3000 Dimensions 2.6" main body height x 3.1” extension (aimed 90°) x 2.0” canopy diameter[6.7cm x 7.9cm x 5.1cm] -
Solid Brass Round Uplight
- Can be used as an uplight, steplight, or downlight in wood or masonry
- Remote transformer required
Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V) Lamps Integrated LED, MR11 LED Lumens 206 max CCT 1000K 1500K 2700K 3000K Dimensions 2.17″ dia. x 3.14" depth (5.5 x 8 cm) Depth: 3.14″ (8.0cm) -
Solid Brass Square Uplight
- Can be used as an uplight, steplight, or downlight in wood or masonry
- Remote transformer required
Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V) Lamps Integrated LED, MR11 LED Lumens 206 max CCT 1000K 1500K 2700K 3000K Dimensions 2.17″ square x 3.14" depth (5.5 x 8 cm) -
Solid Brass Low-Voltage Fixed Downlight
- Ideal for post mounting
- Remote transformer required
- Custom canopy from 1/8″ thick brass available. Consult factory with size, shape, and thru hole orientation needed.
Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V) Lamps Integrated LED Lumens 249 max CCT 1000K 1500K 2700K 3000K Dimensions 2" dia. x 3.8″ x 1.9” extension (5.1 x 9.7 x 4.8 cm) -
Solid Brass, All-Purpose, Low-Voltage LED Canopy-Mounted Directional The E16 is a low-voltage directional luminaire with an integrated, replaceable LED light engine. The light engine features four output settings from 100% to 25%, adjustable in the field.
- Remote transformer required
Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V) Lamps Integrated LED Lumens 799 max CCT 1000K (Red-Orange, 630nm) 1500K (Amber, 595nm) 2700K 3000k Dimensions Diameter: 2.4" (6 cm) Overall length from knuckle pivot: 4.9" (12.4 cm) -
Copper Malama sconce with Bird of Paradise design that fits over Beachside’s L-023 and L-024 backlighting fixtures BOP-12×6 12.0″ height x 6″ width x 4" extension from wall (30.5 x 15.2 x 10.2 cm) Custom sizes available. Specify BOP – (Height in inches) x (Width in inches) Specifications