DarkSky Approved

DarkskyBeachside Lighting has several luminaires which are listed with DarkSky International.  To be certified, a luminaire must have 50 lumens or less in the 90-180 degree range, and less than 10 lumens in the 90-100 degree range.  The correlated color temperature (CCT) should not exceed 3000K, but does have an acceptance up to 3250K, per ANSI standards.  Given that most of our fixtures are well shielded, DarkSky approval is another reason to consider Beachside for marine and desert environments.

  • Solid Brass Low-Voltage Fixed Downlight
    • Ideal for post mounting
    • Remote transformer required
    • Custom canopy from 1/8″ thick brass available.  Consult factory with size, shape, and thru hole orientation needed.
    Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 249 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2" dia. x 3.8″ x 1.9” extension (5.1 x 9.7 x 4.8 cm)
  • Solid Brass, Low-Voltage, Stem-Mounted Path Light
    • Ideal for walkways and tall groundcover
    • Remote transformer required
    • Custom stem lengths available
    Voltage 12 Volts AC with integral driver (9 – 15V input, dimmable below 9V)
    Lamps Integrated LED
    Lumens max 98
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions Lamp Housing: 1.6” diameter x 3.1"  [4.2 x 7.8 cm]
  • Solid Brass, Low-Voltage, Stem-Mounted Path Light
    • Ideal for walkways and tall groundcover
    • Remote transformer required
    • Custom stem lengths available
    Voltage 12 Volts AC with integral driver (9 – 15V input, dimmable below 9V)
    Lamps Integrated LED
    Lumens max 32
    CCT 1000K
    1500K
    Dimensions Lamp Housing: 1.6” diameter x 3.1"  [4.2 x 7.8 cm]
  • Solid Brass Low-Voltage Fixed Downlight
    • Ideal for post mounting
    • Remote transformer required
    • Custom canopy from 1/8″ thick brass available.  Consult factory with size, shape, and thru hole orientation needed.
    Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 123 max
    CCT 1000K
    1500K
    Dimensions 2" dia. x 3.8″ x 1.9” extension (5.1 x 9.7 x 4.8 cm)
  • Solid Brass, Low-profile Marker Light
    • Remote transformer required
    • In-ground or concrete installation
    Voltage 12 Volts AC / DC
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K  (DarkSky approved)
    2700K
    3000K
    Dimensions 3.5″ diameter x 5.3” depth [8.9 x 13.5 cm]
    3.8″ [9.6 cm] trim ring outer diameter
     
    E17 Four-Sector Illumination (standard)
    E17-1 Single-Sector Illumination
    E17-2 Two-Sector, Adjacent Illumination
    E17-OP Two-Sector, Opposite Illumination
  • Solid Brass, Low-profile Marker Light
    • Remote transformer required
    • In-ground or concrete installation
    Voltage 12 Volts AC / DC
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K  (DarkSky approved)
    Dimensions 3.5″ diameter x 5.3” depth [8.9 x 13.5 cm]
    3.8″ [9.6 cm] trim ring outer diameter
     
    E17 Four-Sector Illumination (standard)
    E17-1 Single-Sector Illumination
    E17-2 Two-Sector, Adjacent Illumination
    E17-OP Two-Sector, Opposite Illumination
  • Solid Brass Low-Voltage Fixed Downlight
    • Remote transformer required
    Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 249 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 1.6" dia. body x 2.8" dia. base x 4″ (4.2 x 7 x 10.2 cm)
  • Solid Brass Low-Voltage Fixed Downlight
    • Remote transformer required
    Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 123 max
    CCT 1000K
    1500K
    Dimensions 1.6" dia. body x 2.8" dia. base x 4″ (4.2 x 7 x 10.2 cm)
  • Solid Brass Low-Profile Marker Light
    • Remote transformer required
    Voltage 12 Volts AC/DC with integral driver (9-15V input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens max 15
    CCT 1000K
    1500K (DarkSky approved)
    2700K
    3000K
    Dimensions Dome diameter: 2.19" [5.6 cm]
    Depth: 3.14" [8.0 cm]
     
    E3-M Four-Sector Illumination (standard)
    E3-M-1 Single-Sector Illumination
    E3-M-2 Two-Sector, Adjacent Illumination
    E3-M-OP Two-Sector, Opposite Illumination
  • Solid Brass Low-Profile Marker Light
    • Remote transformer required
    Voltage 12 Volts AC/DC with integral driver (9-15V input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens max 5.6
    CCT 1000K
    1500K (DarkSky approved)
    Dimensions Dome diameter: 2.19" [5.6 cm]
    Depth: 3.14" [8.0 cm]
     
    E3-M Four-Sector Illumination (standard)
    E3-M-1 Single-Sector Illumination
    E3-M-2 Two-Sector, Adjacent Illumination
    E3-M-OP Two-Sector, Opposite Illumination
  • Solid Brass Round Louvered Steplight
    • Can be used as an uplight, steplight, or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens 10.7 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2.17″ dia. x 3.14" depth (5.5 x 8 cm)
  • Solid Brass Round Louvered Steplight
    • Can be used as an steplight or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    CCT 1000K
    1500K
    Dimensions 2.17″ dia. x 3.14" depth (5.5 x 8 cm)
  • Solid Brass Square Louvered Steplight
    • Can be used as an uplight, steplight, or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens 15.4 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2.17″ square x 3.14" depth (5.5 x 8 cm)
  • Solid Brass Square Louvered Steplight
    • Can be used as an steplight or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    CCT 1000K
    1500K
    Dimensions 2.17″ square x 3.14" depth (5.5 x 8 cm)
  • Solid Brass Rectangular Louvered Steplight
    • Remote transformer required
    • Mountable as a steplight, uplight, or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring is 3.3 x 4.3″ (8.3 x 10.9 cm) and fixture depth increases to 5.3″ (13.5 cm).   [E9-RCL-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 3 x 4" trim, 5.0" depth (7.6 x 10.2 cm, 12.6 cm)
  • Solid Brass Rectangular Louvered Steplight
    • Remote transformer required
    • Mountable as a steplight or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring is 3.3 x 4.3″ (8.3 x 10.9 cm) and fixture depth increases to 5.3″ (13.5 cm).   [E9-RCL-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    Dimensions 3 x 4" trim, 5.0" depth (7.6 x 10.2 cm, 12.6 cm)
  • Solid Brass Round Louvered Steplight
    • Remote transformer required
    • Mountable as a steplight, uplight, or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring diameter is 3.8″ (9.6 cm) and fixture depth increases to 5.3″ (13.5 cm).   [E9-RL-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 3.5" trim dia. x 5.0" depth (8.9 x 12.6 cm)
  • Solid Brass Round Louvered Steplight
    • Remote transformer required
    • Mountable as a steplight or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring diameter is 3.8″ (9.6 cm) and fixture depth increases to 5.3″ (13.5 cm).   [E9-RL-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    Dimensions 3.5" trim dia. x 5.0" depth (8.9 x 12.6 cm)
  • Solid Brass Square Louvered Steplight
    • Remote transformer required
    • Mountable as a steplight, uplight, or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring is 4.3″ square (10.9 cm) and fixture depth increases to 5.3″ (13.5 cm).   [E9-SQL-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 4" square trim x 5.0" depth (10 x 12.6 cm)
  • Solid Brass Square Louvered Steplight
    • Remote transformer required
    • Mountable as a steplight or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring is 4.3″ square (10.9 cm) and fixture depth increases to 5.3″ (13.5 cm).   [E9-SQL-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    Dimensions 4" square trim x 5.0" depth (10 x 12.6 cm)
  • Solid Brass Fixed Downlight
    • Lamp is recessed for glare reduction
    • Remote transformer required for 12V
    Voltage 12V, 120V, 230V
    Lamps Integrated LED, MR16 LED & Halogen
    Lumens 791 max (11W)
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2.4" dia. body x 4.75" dia. base x 4.7″ (6 x 12.1 x 12 cm)
  • Solid Brass Fixed Downlight
    • Lamp is recessed for glare reduction
    • Remote transformer required for 12V
    Voltage 12V, 120V, 230V
    Lamps Integrated LED, MR16 LED
    Lumens 338 max (8W)
    CCT 1000K
    1500K
    Dimensions 2.4" dia. body x 4.75" dia. base x 4.7″ (6 x 12.1 x 12 cm)
  • Recessed Cast Brass Steplight The L-012 is a recessed, low-voltage steplight that uses MR16 lamps and is available with clear, frosted, and rectilinear spread glass lenses.
    • Remote transformer required
    • Suitable for combustible and non-combustible mounting surfaces
    • Suitable for indoor or outdoor use
    Voltage 12V AC/DC
    Lamps MR16 LED
    Lumens 525 max
    CCT 1500
    2700
    3000
    Dimensions Faceplate: 4.4″ dia. x 2.1″ extension (11.2 x 5.3 cm)
    PVC rough-in housing: 2-7/8″ dia. x 5.1″ deep (7.3 x 13 cm)
  • Recessed Cast Brass Steplight The L-012 is a recessed, low-voltage steplight that uses an MR16 lamp and is available with clear, frosted, and rectilinear spread glass lenses.
    • Remote transformer required
    • Suitable for combustible and non-combustible mounting surfaces
    • Suitable for indoor or outdoor use
    Voltage 12V AC/DC
    Lamps MR16 LED
    CCT 1500
    Dimensions Faceplate: 4.4″ dia. x 2.1″ extension (11.2 x 5.3 cm)
    PVC rough-in housing: 2-7/8″ dia. x 5.1″ deep (7.3 x 13 cm)
  • Wall-Mounted Brass Downlight
    • Remote transformer required for 12V
    • CSA Listed for US and Canada, file #190030
    • Certified for indoor (12V) or outdoor use
    Voltage 12V, 120V, 230V
    Lamps Integrated LED light engine, MR16 LED
    Lumens 799 max
    CCT 1000K
    1300K
    1500K
    2700K
    3000K
    Dimensions 5.9"/14.9 cm tall (MR16), 6.6"/16.8 cm tall (light engine)
    2.4" dia lamp body x 3.7" extension from wall (6 x 9.3 cm)
  • Wall-Mounted Brass Downlight
    • Remote transformer required for 12V
    • Certified for indoor (12V) or outdoor use
    Voltage 12V, 120V, 230V
    Lamps Integrated LED light engine, MR16 LED
    Lumens 372 max
    CCT 1000K
    1300K
    1500K
    Dimensions 5.9"/14.9 cm tall (MR16), 6.6"/16.8 cm tall (light engine)
    2.4" dia lamp body x 3.7" extension from wall (6 x 9.3 cm)
  • L-016:  New Construction L-016R:  Remodel
    • Rotation ring and angling bracket allow aiming in any direction
    • Cast brass trim
    • Suitable for wet locations
    • Suitable for indoor use when equipped with integrated light engine
    Voltage 12V with integral magnetic transformer
    Lamps Integrated LED, MR16 LED
    Lumens 212 max
    CCT 1000K
    1500K
    Faceplate Dimensions 5" dia x 0.8" high (12.7 x 2.1 cm)
  • L-016:  New Construction L-016R:  Remodel
    • Rotation ring and angling bracket allow aiming in any direction
    • Cast brass trim
    • Suitable for wet locations
    • Suitable for indoor use when equipped with integrated light engine
    Voltage 12V with integral magnetic transformer
    Lamps Integrated LED, MR16 LED
    Lumens 678 max
    CCT 1000K
    1500K
    2700K
    3000K
    Faceplate Dimensions 5" dia x 0.8" high (12.7 x 2.1 cm)
Go to Top