- Adjustable angle up to 30°
- Remote transformer required
| Voltage | 12V AC/DC |
| Lamps | MR16 LED |
| Lumens | 630 max |
| CCT | 1500K |
| 2700K | |
| 3000K | |
| Dimensions | 4″ dia. x 7.9” depth (10.2 x 20 cm) |
Beachside’s in-grade fixtures are ideal for applications where a low profile needs to be maintained. The L-009 and L-010 have different uplighting capabilities and the L-017 is an in-grade pathlight suitable for high traffic areas. The E3 series uses a single-LED module or an MR11 lamp for illumination with a minimal footprint.
-
Solid Brass, All-Purpose, In-Grade Uplight -
Solid Brass, Low-profile Marker Light- Remote transformer required
- In-ground or concrete installation
Voltage 12 Volts AC / DC Lamps Integrated LED, MR16 LED CCT 1000K 1500K (DarkSky approved) 2700K 3000K Dimensions 3.5″ diameter x 5.3” depth [8.9 x 13.5 cm] 3.8″ [9.6 cm] trim ring outer diameter E17 Four-Sector Illumination (standard) E17-1 Single-Sector Illumination E17-2 Two-Sector, Adjacent Illumination E17-OP Two-Sector, Opposite Illumination -
Solid Brass Low-Profile Marker Light- Remote transformer required
Voltage 12 Volts AC/DC with integral driver (9-15V input, dimmable below 9V) Lamps Integrated LED, MR11 LED Lumens max 15 CCT 1000K 1500K (DarkSky approved) 2700K 3000K Dimensions Dome diameter: 2.19" [5.6 cm] Depth: 3.14" [8.0 cm] E3-M Four-Sector Illumination (standard) E3-M-1 Single-Sector Illumination E3-M-2 Two-Sector, Adjacent Illumination E3-M-OP Two-Sector, Opposite Illumination -
Solid Brass Round Uplight- Can be used as an uplight, steplight, or downlight in wood or masonry
- Remote transformer required
Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V) Lamps Integrated LED, MR11 LED Lumens 206 max CCT 1000K 1500K 2700K 3000K Dimensions 2.17″ dia. x 3.14" depth (5.5 x 8 cm) Depth: 3.14″ (8.0cm) -
Solid Brass Square Uplight- Can be used as an uplight, steplight, or downlight in wood or masonry
- Remote transformer required
Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V) Lamps Integrated LED, MR11 LED Lumens 206 max CCT 1000K 1500K 2700K 3000K Dimensions 2.17″ square x 3.14" depth (5.5 x 8 cm) -
Solid Brass Round Steplight / Uplight- Remote transformer required
- Mountable as a steplight, uplight, or downlight
- “CR” versions add a Concrete Ring for fully recessed concrete installation. Ring diameter is 3.8″ (9.6 cm) and fixture depth increases to 5.3″ (13.5 cm). [E9-R-CR]
Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V) Lamps Integrated LED, MR16 LED Lumens 630 max CCT 1000K 1300K 1500K 2700K 3000K Dimensions 3.5" trim dia. x 5.0" depth (8.9 x 12.6 cm) -
Solid Brass Square Steplight / Uplight- Remote transformer required
- Mountable as a steplight, uplight, or downlight
- “CR” versions add a Concrete Ring for fully recessed concrete installation. Ring is 4.3″ square (10.9 cm) and fixture depth increases to 5.3″ (13.5 cm). [E9-SQ-CR]
1500KVoltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V) Lamps Integrated LED, MR16 LED Lumens 630 max CCT 1000K 1300K 1500K 2700K 3000K Dimensions 4" square trim x 5.0" depth (10 x 12.6 cm) -
All Brass In-Grade Uplight The L-009 is a fixed-position brass well light for in-ground uplighting applications where a low profile is needed. An optional brass glare shield can be installed in the field.- Remote transformer required.
Voltage 12V AC Lamps MR16 LED Lumens 525 max CCT 1500K CCT 2700K CCT 3000K Dimensions 4.4″ dia x 1.2" exposed height (11.1 x 2.9 cm) 7.3” depth below grade (18.5 cm) -
Brass & Composite In-Ground Aimable Uplight The L-010 series in-ground drive-over fixtures are brass & composite uplights for high-traffic areas. An internal bracket assembly allows 360° rotation and angling of the lamp up to 16° before any cutoff.- “CR” versions add a Concrete Ring for fully recessed concrete installation. Ring diameter is 6.7″ (17cm) and exposed height reduces reduces to 0.3" (0.8 cm). [L-010-CR, L-010-C-CR]
- Remote transformer required for 12V
Voltage 12V, 120v, 230V Lamps Integrated LED, MR16 LED Lumens 799 max CCT 1000K 1500K 2700K 3000K Dimensions 6.5″ dia. x 0.6″ exposed height (16.5 x 1.3 cm) -
Brass & Composite In-Ground Pathlight for High Traffic & Drive-Over Applications The L-017 series in-ground drive-over fixtures are brass & composite pathlights for high-traffic areas. This low-profile fixture is ideal for paths with low ground cover and along pathways used by golf carts, service trucks, or automobiles at country clubs & resorts.- “CR” versions add a Concrete Ring for fully recessed concrete installation. Ring diameter is 6.7″ (17cm) and exposed height reduces to 1.7″ (4.2 cm). [L-017-CR, L-017-C-CR]
- Remote transformer required for 12V
Voltage 12V, 120v, 230V Lamps MR16 LED CCT 1500K (DarkSky approved) 3000K Dimensions 6.5″ dia. x 1.9″ exposed height (16.5 x 4.9 cm)