Beachside’s in-grade fixtures are ideal for applications where a low profile needs to be maintained. The L-009 and L-010 have different uplighting capabilities and the L-017 is an in-grade pathlight suitable for high traffic areas. The E3 series uses a single-LED module or an MR11 lamp for illumination with a minimal footprint.

  • E3-m-2 In-grade E3-m-2 Dims In-grade
    Solid Brass Low-Profile Marker Light
    • Remote transformer required
    Voltage 12 Volts AC/DC with integral driver (9-15V input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens max 15
    CCT 1500K
    2700K
    3000K
    Dimensions Dome diameter: 2.19" [5.6 cm]
    Depth: 3.14" [8.0 cm]
     
    E3-M Four-Sector Illumination (standard)
    E3-M-1 Single-Sector Illumination
    E3-M-2 Two-Sector, Adjacent Illumination
    E3-M-OP Two-Sector, Opposite Illumination
     
    (Amber Only)
  • E17 Top In-grade E17 Dims In-grade
    Solid Brass, Low-profile Marker Light
    • Remote transformer required
    • In-ground or concrete installation
    Voltage 12 Volts AC / DC
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 3.5″ diameter x 4.4” depth [8.9 x 11.3 cm]
    3.8″ [9.6 cm] trim ring outer diameter
     
    E17 Four-Sector Illumination (standard)
    E17-1 Single-Sector Illumination
    E17-2 Two-Sector, Adjacent Illumination
    E17-OP Two-Sector, Opposite Illumination
     
    (Amber Only)
  • L-017 In-grade L-017 Dims In-grade
    Brass & Composite In-Ground Pathlight for High Traffic & Drive-Over Applications The L-017 series in-ground drive-over fixtures are brass & composite pathlights for high-traffic areas. This low-profile fixture is ideal for paths with low ground cover and along pathways used by golf carts, service trucks, or automobiles at country clubs & resorts.
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring diameter is 6.7″ (17cm) and exposed height reduces to 1.7″ (4.2 cm).   [L-017-CR, L-017-C-CR]
    • Remote transformer required for 12V
    Voltage 12V, 120v, 230V
    Lamps MR16 LED
    CCT 1500K
    3000K
    Dimensions 6.5″ dia. x 1.9″ exposed height (16.5 x 4.9 cm)
     
    (Amber Only)
  • E10 In-grade E10 In-grade3
    Solid Brass, All-Purpose, In-Grade Uplight
    • Adjustable angle up to 30°
    • Remote transformer required
    Voltage 12V AC/DC
    Lamps MR16 LED
    Lumens 630 max
    CCT 1500K
    2700K
    3000K
    Dimensions 4″ dia. x 7.9” depth (10.2 x 20 cm)
  • E3-r Architectural E3-r Dims Architectural
    Solid Brass Round Uplight
    • Can be used as an uplight, steplight, or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens 206 max
    CCT 1500K
    2700K
    3000K
    Dimensions 2.17″ dia. x 3.14" depth (5.5 x 8 cm)
    Depth: 3.14″ (8.0cm)
  • E3-sq Architectural E3-sq Dims Architectural
    Solid Brass Square Uplight
    • Can be used as an uplight, steplight, or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens 206 max
    CCT 1500K
    2700K
    3000K
    Dimensions 2.17″ square x 3.14" depth (5.5 x 8 cm)
  • E9-r-cr Steplights E9-r-cr Dims Steplights
    Solid Brass Round Steplight / Uplight
    • Remote transformer required
    • Mountable as a steplight, uplight, or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring diameter is 3.8″ (9.6 cm) and fixture depth increases to 4.4″ (11.3 cm).   [E9-R-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 3.5" trim dia. x 4.1" depth (8.9 x 10.4 cm)
  • E9-sq-cr Steplights E9-sq Dims Steplights
    Solid Brass Square Steplight / Uplight
    • Remote transformer required
    • Mountable as a steplight, uplight, or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring is 4.3″ square (10.9 cm) and fixture depth increases to 4.4″ (11.3 cm).   [E9-SQ-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 4" square trim x 4.1" depth (10 x 10.4 cm)
  • L-009-bgs9 In-grade L-009 In-grade
    All Brass In-Grade Uplight The L-009 is a fixed-position brass well light for in-ground uplighting applications where a low profile is needed.  An optional brass glare shield can be installed in the field.
    • Remote transformer required.
    Voltage 12V AC
    Lamps MR16 LED
    Lumens 525 max
    CCT 1500K
    CCT 2700K
    CCT 3000K
    Dimensions 4.4″ dia x 1.2" exposed height (11.1 x 2.9 cm)
    7.3” depth below grade (18.5 cm)
  • L-010 In-grade L-010 In-grade2
    Brass & Composite In-Ground Aimable Uplight The L-010 series in-ground drive-over fixtures are brass & composite uplights for high-traffic areas.  An internal bracket assembly allows 360° rotation and angling of the lamp up to 16° before any cutoff.
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring diameter is 6.7″ (17cm) and exposed height reduces reduces to 0.3" (0.8 cm).   [L-010-CR, L-010-C-CR]
    • Remote transformer required for 12V
    Voltage 12V, 120v, 230V
    Lamps  Integrated LED, MR16 LED
    Lumens 799 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 6.5″ dia. x 0.6″ exposed height (16.5 x 1.3 cm)

Title

Go to Top