Step Lights

Beachside’s steplighting fixtures are extremely durable for this type of lighting where safety is a priority. Featuring all brass construction, the housings will not deteriorate when in contact with concrete. Some fixtures have lamp ratings allowing use in wood. Many of our steplights are also certified as “Wildlife Friendly” by the Florida Fish & Wildlife Conservation Commission.

  • Solid Brass Round Uplight
    • Can be used as an uplight, steplight, or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens 206 max
    CCT 1500K
    2700K
    3000K
    Dimensions 2.17″ dia. x 3.14" depth (5.5 x 8 cm)
    Depth: 3.14″ (8.0cm)
  • Solid Brass Round Louvered Steplight
    • Can be used as an uplight, steplight, or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens 10.7 max
    CCT 1500K
    2700K
    3000K
    Dimensions 2.17″ dia. x 3.14" depth (5.5 x 8 cm)
     
  • Solid Brass Square Uplight
    • Can be used as an uplight, steplight, or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens 206 max
    CCT 1500K
    2700K
    3000K
    Dimensions 2.17″ square x 3.14" depth (5.5 x 8 cm)
  • Solid Brass Square Louvered Steplight
    • Can be used as an uplight, steplight, or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens 15.4 max
    CCT 1500K
    2700K
    3000K
    Dimensions 2.17″ square x 3.14" depth (5.5 x 8 cm)
     
  • Solid Brass Round Steplight / Uplight
    • Remote transformer required
    • Mountable as a steplight, uplight, or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring diameter is 3.8″ (9.6 cm) and fixture depth increases to 4.4″ (11.3 cm).   [E9-R-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    Lumens 630 max
    CCT 1000K
    1300K
    1500K
    2700K
    3000K
    Dimensions 3.5" trim dia. x 4.1" depth (8.9 x 10.4 cm)
  • Solid Brass Round Louvered Steplight
    • Remote transformer required
    • Mountable as a steplight, uplight, or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring diameter is 3.8″ (9.6 cm) and fixture depth increases to 4.4″ (11.3 cm).   [E9-RL-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 3.5" trim dia. x 4.1" depth (8.9 x 10.4 cm)
     
  • Solid Brass Rectangular Steplight / Uplight
    • Remote transformer required
    • Mountable as a steplight, uplight, or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring is 3.3 x 4.3″ (8.3 x 10.9 cm) and fixture depth increases to 4.4″ (11.3 cm).   [E9-RC-CR]
    1500K
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    Lumens 630 max
    CCT 1000K
    1300K
    1500K
    2700K
    3000K
    Dimensions 3 x 4" trim, 4.1" depth (7.6 x 10.2 cm, 10.4 cm)
  • Solid Brass Rectangular Louvered Steplight
    • Remote transformer required
    • Mountable as a steplight, uplight, or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring is 3.3 x 4.3″ (8.3 x 10.9 cm) and fixture depth increases to 4.4″ (11.3 cm).   [E9-RCL-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 3 x 4" trim, 4.1" depth (7.6 x 10.2 cm, 10.4 cm)
     
  • Solid Brass Square Steplight / Uplight
    • Remote transformer required
    • Mountable as a steplight, uplight, or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring is 4.3″ square (10.9 cm) and fixture depth increases to 4.4″ (11.3 cm).   [E9-SQ-CR]
    1500K
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    Lumens 630 max
    CCT 1000K
    1300K
    1500K
    2700K
    3000K
    Dimensions 4" square trim x 4.1" depth (10 x 10.4 cm)
  • Solid Brass Square Louvered Steplight
    • Remote transformer required
    • Mountable as a steplight, uplight, or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring is 4.3″ square (10.9 cm) and fixture depth increases to 4.4″ (11.3 cm).   [E9-SQL-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 4" square trim x 4.1" depth (10 x 10.4 cm)
     
  • Recessed Cast Brass Steplight The L-012 is a recessed, low-voltage steplight that uses MR16 lamps and is available with clear, frosted, and rectilinear spread glass lenses.
    • Remote transformer required
    • Suitable for combustible and non-combustible mounting surfaces
    • Suitable for indoor or outdoor use
    Voltage 12V AC/DC
    Lamps MR16 LED
    Lumens 525 max
    CCT 1500
    2700
    3000
    Dimensions Faceplate: 4.4″ dia. x 2.1″ extension (11.2 x 5.3 cm)
    Copper rough-in spacer: 3″ dia. x 3.9″ deep (7.6 x 9.8 cm)
     
  • Cast Brass Steplight for Surface-Mount Applications
    • Remote transformer required
    • Suitable for combustible and non-combustible applications
    Voltage 12V AC
    Lamps G4 LED
    CCT 1500K
    2700K
    3000K
    Dimensions 4.4″ dia. x 2.1″ extension (11.2 x 5.3 cm)
  • Cast Brass, Recessed Steplight
    • Remote transformer required for 12V
    • Durable construction—cast brass components
    • Louvers angled to 30° to eliminate glare
    • Non-combustible (masonry) installation only
    Voltage 12V, 120V
    Lamps MR16 LED
    Lumens 525 max
    CCT 1500K
    3000K
    Dimensions 3.3" x 5.3" x 5" deep (8.3 x 13.3 x 12.6 cm)
  • Solid Brass Steplight The STL is a compact steplight that utilizes a standard single-gang junction box.
    Voltage 120V (dimmable), 100-277V (non-dimmable)
    Lamps Integrated LED
    Lumens 75 max
    CCT 1700K
    3000K
    Dimensions Trim size: 3 x 4 x 0.34″ (7.5 x 12.1 x 0.9 cm)
    Junction Box depth: 2.2″ (5.6 cm)
     

Title

Go to Top