• Solid Brass Low-Voltage Fixed Downlight
    • Ideal for post mounting
    • Remote transformer required
    • Custom canopy from 1/8″ thick brass available.  Consult factory with size, shape, and thru hole orientation needed.
    Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 249 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2" dia. x 3.8″ x 1.9” extension (5.1 x 9.7 x 4.8 cm)
     
  • Solid Brass Low-Profile Marker Light
    • Remote transformer required
    Voltage 12 Volts AC/DC with integral driver (9-15V input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens max 15
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions Dome diameter: 2.19" [5.6 cm]
    Depth: 3.14" [8.0 cm]
     
    E3-M Four-Sector Illumination (standard)
    E3-M-1 Single-Sector Illumination
    E3-M-2 Two-Sector, Adjacent Illumination
    E3-M-OP Two-Sector, Opposite Illumination
     
    (Amber Only)
  • Solid Brass, Low-profile Marker Light
    • Remote transformer required
    • In-ground or concrete installation
    Voltage 12 Volts AC / DC
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 3.5″ diameter x 5.3” depth [8.9 x 13.5 cm]
    3.8″ [9.6 cm] trim ring outer diameter
     
    E17 Four-Sector Illumination (standard)
    E17-1 Single-Sector Illumination
    E17-2 Two-Sector, Adjacent Illumination
    E17-OP Two-Sector, Opposite Illumination
     
    (Amber Only)
  • Brass & Composite In-Ground Pathlight for High Traffic & Drive-Over Applications The L-017 series in-ground drive-over fixtures are brass & composite pathlights for high-traffic areas. This low-profile fixture is ideal for paths with low ground cover and along pathways used by golf carts, service trucks, or automobiles at country clubs & resorts.
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring diameter is 6.7″ (17cm) and exposed height reduces to 1.7″ (4.2 cm).   [L-017-CR, L-017-C-CR]
    • Remote transformer required for 12V
    Voltage 12V, 120v, 230V
    Lamps MR16 LED
    CCT 1500K
    3000K
    Dimensions 6.5″ dia. x 1.9″ exposed height (16.5 x 4.9 cm)
     
    (Amber Only)
  • Solid Brass, Low-Voltage, Stem-Mounted Path Light
    • Ideal for walkways and tall groundcover
    • Remote transformer required
    • Custom stem lengths available
    Voltage 12 Volts AC with integral driver (9 – 15V input, dimmable below 9V)
    Lamps Integrated LED
    Lumens max 98
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions Lamp Housing: 1.6” diameter x 3.1"  [4.2 x 7.8 cm]
     
  • Brass Bell-Type Pathlight The L-004 is a bell-type path light made from brass and copper.  Ideal for walkway and area lighting in any landscape theme and location.
    • Remote transformer required
    • Durable construction: all brass components with copper bell shade
    • CSA Listed to US and Canadian safety standards, file #190030
    Voltage 12V AC
    Lamps LED
    CCT 2700
    3000
    Dimensions 23 inch (58.4cm) overall height
  • Beachside Lighting’s M-Series Pathlights are the ultimate in heavy-duty landscape lighting.  Made of cast brass, these fixtures are larger than other Beachside pathlights.  The omnidirectional LED lamp is protected by a threaded glass lens.  Louvers are angled at 45° to eliminate glare.  Risers are schedule 80 brass pipe.  A single-louver design also is available for use with an integrated light engine or drop-in MR16 LED. M-series pathlights with amber and red-orange LED lamps are certified as “Wildlife Friendly” by the Florida Fish & Wildlife Conservation Commission.  To view these fixtures click HERE.
    • Durable construction: all brass components
    • Stems available in three sizes: 16″, 20″ (standard), & 24
    • CSA Listed to US and Canadian safety standards, file #190030
    Voltage 12V, 120V
    Lamps LED
    CCT 1500
    2700
    3000
     
  • Solid Brass, All-Purpose, In-Grade Uplight
    • Adjustable angle up to 30°
    • Remote transformer required
    Voltage 12V AC/DC
    Lamps MR16 LED
    Lumens 630 max
    CCT 1500K
    2700K
    3000K
    Dimensions 4″ dia. x 7.9” depth (10.2 x 20 cm)
  • Beachside Lighting’s M-Series LED Pathlights are the ultimate in heavy-duty landscape lighting.  Made of cast brass, these fixtures are larger than other Beachside pathlights.  The lamp is protected by a threaded glass lens.  Louvers are angled at 45° to eliminate glare.  Risers are schedule 80 brass pipe.  M-series fixtures with a single-louver design use directional LED sources with a reflector.  A traditional multi-louver design also is available with omnidirectional LED light sources. M-series pathlights with amber and red-orange LED lamps are certified as “Wildlife Friendly” by the Florida Fish & Wildlife Conservation Commission.  To view these fixtures click HERE.
    • Durable construction: all brass components
    • Stems available in three sizes: 16″, 20″ (standard), & 24
    • CSA Listed to US and Canadian safety standards, file #190030
    Voltage 12V, 120V, 230V
    Lamps Integrated LED, MR16 LED
    CCT 1000
    1500
    2700
    3000
     
  • Beachside Lighting’s R-Series Pathlights have set the standard for durability in low-voltage walkway and area lighting.  The completely sealed fixture allows easy access to the brass lamp compartment for tool-free relamping.  Features include an 18-gauge copper shade, a 5 mm-thick frosted glass lens, and a riser made from schedule 40 brass pipe.  The lamping is G4 bi-pin LED.  The omnidirectional lamping allows for a lower profile, with most shade heights positioned so their lower edge is at the bottom of the glass, resulting in low-to-no glare. All fixtures are CSA Listed to US and Canadian safety standards, file #190030.
    • 12 Volts AC
    • Remote transformer required
    • Durable construction: all brass components and copper shades
    Voltage 12V AC
    Lamps Omnidirectional LED
    CCT 1500K
    2700K
    3000K
     
  • Solid Brass Low-Voltage Fixed Downlight
    • Remote transformer required
    Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 249 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 1.6" dia. body x 2.8" dia. base x 4″ (4.2 x 7 x 10.2 cm)
     
  • Beachside Lighting’s R-Series LED Pathlights have set the standard for durability in low-voltage walkway and area lighting.  The completely sealed fixture allows easy access to the brass lamp compartment for tool-free relamping.  Features include an 18-gauge copper shade, a 5 mm-thick frosted glass lens, and a riser made from schedule 40 brass pipe.  The lamping is MR16 LED, allowing both 12V and 120V/230V options.  The upward-directed lamp hits a reflector in the shade assembly.  Most shade heights are positioned so their lower edge is at the bottom of the glass, resulting in low-to-no glare. All fixtures are CSA Listed to US and Canadian safety standards, file #190030.
    • Durable construction: all brass components and copper shades
    Voltage 12V, 120V, 230V
    Lamps LED
    CCT 1000K
    1500K
    2700K
    3000K
     
  • Solid Brass Round Uplight
    • Can be used as an uplight, steplight, or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens 206 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2.17″ dia. x 3.14" depth (5.5 x 8 cm)
    Depth: 3.14″ (8.0cm)
  • 2 Watt Amber LED module (1600K) certified by Florida Fish & Wildlife Conservation Commission as "Wildlife Friendly".  
    2W-A-SP 10°
    2W-A-NFL 30°
    2W-A-FL 50°
  • 2 Watt Red-Orange LED module (1000K) approved by Florida Fish & Wildlife Conservation Commission as "Wildlife Friendly".  
    2W-RO-SP 10°
    2W-RO-NFL 30°
    2W-RO-FL 50°
    2W-RO-NO No Optic
  • 7-Watt Amber LED module (1400K) certified by Florida Fish & Wildlife Conservation Commission as "Wildlife Friendly"  
    7W-A-SP 10°
    7W-A-NFL 30°
    7W-A-FL 50°
  • 7-Watt Amber LED module (1000K) approved by Florida Fish & Wildlife Conservation Commission as "Wildlife Friendly"  
    8W-RO-SP 10°
    8W-RO-NFL 30°
    8W-RO-FL 50°
  • Solid Brass Low-Voltage Fixed Downlight
    • Ideal for post mounting
    • Remote transformer required
    • Custom canopy from 1/8″ thick brass available.  Consult factory with size, shape, and thru hole orientation needed.
    Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 123 max
    CCT 1000K
    1500K
    Dimensions 2" dia. x 3.8″ x 1.9” extension (5.1 x 9.7 x 4.8 cm)
     
  • Solid Brass, Low-Voltage, Stem-Mounted Path Light
    • Ideal for walkways and tall groundcover
    • Remote transformer required
    • Custom stem lengths available
    Voltage 12 Volts AC with integral driver (9 – 15V input, dimmable below 9V)
    Lamps Integrated LED
    Lumens max 32
    CCT 1000K
    1500K
    Dimensions Lamp Housing: 1.6” diameter x 3.1"  [4.2 x 7.8 cm]
     
  • Solid Brass Low-Voltage Fixed Downlight
    • Remote transformer required
    Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 123 max
    CCT 1000K
    1500K
    Dimensions 1.6" dia. body x 2.8" dia. base x 4″ (4.2 x 7 x 10.2 cm)
     
  • Solid Brass Low-Profile Marker Light
    • Remote transformer required
    Voltage 12 Volts AC/DC with integral driver (9-15V input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens max 5.6
    CCT 1000K
    1500K
    Dimensions Dome diameter: 2.19" [5.6 cm]
    Depth: 3.14" [8.0 cm]
     
    E3-M Four-Sector Illumination (standard)
    E3-M-1 Single-Sector Illumination
    E3-M-2 Two-Sector, Adjacent Illumination
    E3-M-OP Two-Sector, Opposite Illumination
     
  • Solid Brass Round Louvered Steplight
    • Can be used as an uplight, steplight, or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens 10.7 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2.17″ dia. x 3.14" depth (5.5 x 8 cm)
     
  • Solid Brass Round Louvered Steplight
    • Can be used as an steplight or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    CCT 1000K
    1500K
    Dimensions 2.17″ dia. x 3.14" depth (5.5 x 8 cm)
     
  • Solid Brass, All-Purpose, Low-Voltage LED Canopy-Mounted Directional The E16 is a low-voltage directional luminaire with an integrated, replaceable LED light engine.  The light engine features four output settings from 100% to 25%, adjustable in the field.
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 799 max
    CCT 1000K (Red-Orange, 630nm)
    1500K (Amber, 595nm)
    2700K
    3000k
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 4.9" (12.4 cm)
  • Solid Brass Square Louvered Steplight
    • Can be used as an steplight or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    CCT 1000K
    1500K
    Dimensions 2.17″ square x 3.14" depth (5.5 x 8 cm)
     
  • Solid Brass, Low-Voltage, Directional
    • Ideal for post mounting and spaces that require a low-profile directional
    • Remote transformer required
    Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 202
    CCT 1000
    1500
    2700
    3000
    Dimensions 2.6" main body height x 3.1” extension (aimed 90°) x 2.0” canopy diameter[6.7cm x 7.9cm x 5.1cm]
  • Solid Brass, Low-profile, Low-Voltage Directional
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 249
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions Diameter: 1.6″ (4.2cm)
    Overall length from knuckle pivot: 4.1″ (10.5cm)
  • Solid Brass, Low-profile, Low-Voltage Directional
    • Directional downlight certified by International Dark Sky Association when mounted on VERTICAL surface and aimed downward. This fixture will not work nor be Dark Sky compliant if mounted to a horizontal surface such as the ground or ceiling.
    • Fixture comes standard with angled glare shield and Sure Aim accessory
    • Knuckle can be angled from 0° (straight down) to a maximum of 30° from vertical
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 249
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions Diameter: 1.6″ (4.2cm)
    Overall length from knuckle pivot: 5.9″ (13.9cm)
     
  • Solid Brass, Low-profile, Low-Voltage Directional
    • Directional downlight certified by International Dark Sky Association when mounted on VERTICAL surface and aimed downward. This fixture will not work nor be Dark Sky compliant if mounted to a horizontal surface such as the ground or ceiling.
    • Fixture comes standard with angled glare shield and Sure Aim accessory
    • Knuckle can be angled from 0° (straight down) to a maximum of 30° from vertical
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 123 max
    CCT 1000K
    1500K
    Dimensions Diameter: 1.6″ (4.2cm)
    Overall length from knuckle pivot: 5.9″ (13.9cm)
     
  • Solid Brass, Low-Profile, Hanging Downlight
    • Supplied with 20″ stainless steel cable, 36″ lead wire, and 1/2″ male fitting for mounting accessory
    • Can also be hung directly by loop
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens max 123
    CCT 1000K
    1500K
    Dimensions 1.6″ dia. x  3.25" (4.2 x 8.3 cm)
  • Solid Brass, Low-profile, Low-voltage Double Directional on Brass Riser
    • Can be aimed up or down
    • Ideal for tall groundcover
    Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 249
    CCT 1000
    1500
    2700
    3000
    Dimensions Diameter: 1.6″ (4.2cm)
    Overall length from knuckle pivot: 4.1″ (10.5cm)
  • Solid Brass Round Louvered Steplight
    • Remote transformer required
    • Mountable as a steplight or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring diameter is 3.8″ (9.6 cm) and fixture depth increases to 5.3″ (13.5 cm).   [E9-RL-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    Dimensions 3.5" trim dia. x 5.0" depth (8.9 x 12.6 cm)
     
  • Solid Brass Rectangular Louvered Steplight
    • Remote transformer required
    • Mountable as a steplight or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring is 3.3 x 4.3″ (8.3 x 10.9 cm) and fixture depth increases to 5.3″ (13.5 cm).   [E9-RCL-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    Dimensions 3 x 4" trim, 5.0" depth (7.6 x 10.2 cm, 12.6 cm)
     
  • Solid Brass, All-purpose, Low-voltage LED Directional The E16 is a low-voltage directional luminaire with an integrated, replaceable LED light engine.  The light engine features four output settings from 100% to 25%, adjustable in the field.
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 799 max
    CCT 1000K (Red-Orange, 630nm)
    1500K (Amber, 595nm)
    2700K
    3000k
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 4.9" (12.4 cm)
  • Solid Brass Square Louvered Steplight
    • Remote transformer required
    • Mountable as a steplight or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring is 4.3″ square (10.9 cm) and fixture depth increases to 5.3″ (13.5 cm).   [E9-SQL-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    Dimensions 4" square trim x 5.0" depth (10 x 12.6 cm)
     
  • Solid Brass, All-purpose, Low-voltage LED Directional The E16-30-BGS-SA is a low-voltage directional luminaire with an integrated, replaceable LED light engine.  The warm white light engines features four output settings from 100% to 25%, adjustable in the field.
    • Directional downlight certified by International Dark Sky Association when mounted on VERTICAL surface and aimed downward. This fixture will not work nor be Dark Sky compliant if mounted to a horizontal surface such as the ground or ceiling.
    • Fixture comes standard with angled glare shield and Sure Aim accessory
    • Knuckle can be angled from 0 (straight down) to a maximum of 30o from vertical
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 799 max
    CCT 1000K (Red-Orange, 630nm)
    1500K (Amber, 595nm)
    2700K
    3000K
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 7.3" (18.4 cm)
     
  • Solid Brass, All-purpose, Low-voltage LED Directional The E16-30-BGS-SA-WL is a low-voltage directional luminaire with an integrated, replaceable LED light engine.
    • Directional downlight certified by International Dark Sky Association when mounted on VERTICAL surface and aimed downward. This fixture will not work nor be Dark Sky compliant if mounted to a horizontal surface such as the ground or ceiling.
    • Fixture comes standard with angled glare shield and Sure Aim accessory
    • Knuckle can be angled from 0 (straight down) to a maximum of 30o from vertical
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 372 max
    CCT 1000K (Red-Orange, 630nm)
    1500K (Amber, 595nm)
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 7.3" (18.4 cm)
     
  • Solid Brass, Low-Voltage Hanging Downlight
    • Supplied with 20″ stainless steel cable, 36″ lead wire, and 1/2″ male fitting for mounting accessory
    • Can also be hung directly by loop
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 799 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2.4″ dia. x  4.2" (6 x 10.6 cm)
  • Solid Brass, Low-profile Marker Light
    • Remote transformer required
    • In-ground or concrete installation
    Voltage 12 Volts AC / DC
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    Dimensions 3.5″ diameter x 5.3” depth [8.9 x 13.5 cm]
    3.8″ [9.6 cm] trim ring outer diameter
     
    E17 Four-Sector Illumination (standard)
    E17-1 Single-Sector Illumination
    E17-2 Two-Sector, Adjacent Illumination
    E17-OP Two-Sector, Opposite Illumination
     
  • Solid Brass, All-Purpose Directional
    • Directional downlight certified by International Dark Sky Association when mounted on VERTICAL surface and aimed downward. This fixture will not work nor be Dark Sky compliant if mounted to a horizontal surface such as the ground or ceiling.
    • Fixture comes standard with angled glare shield and Sure Aim accessory
    • Knuckle can be angled from 0 (straight down) to a maximum of 30o from vertical
    • Remote transformer required for 12V
    Voltage 12V, 120V
    Lamps MR16 LED
    Lumens 79 max
    CCT 1500K
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 7.3″ (18.4 cm)
     
  • Solid Brass Fixed Downlight
    • Lamp is recessed for glare reduction
    • Remote transformer required for 12V
    Voltage 12V, 120V, 230V
    Lamps Integrated LED, MR16 LED
    Lumens 338 max (8W)
    CCT 1000K
    1500K
    Dimensions 2.4" dia. body x 4.75" dia. base x 4.7″ (6 x 12.1 x 12 cm)
     
  • Recessed Cast Brass Steplight The L-012 is a recessed, low-voltage steplight that uses an MR16 lamp and is available with clear, frosted, and rectilinear spread glass lenses.
    • Remote transformer required
    • Suitable for combustible and non-combustible mounting surfaces
    • Suitable for indoor or outdoor use
    Voltage 12V AC/DC
    Lamps MR16 LED
    CCT 1500
    Dimensions Faceplate: 4.4″ dia. x 2.1″ extension (11.2 x 5.3 cm)
    PVC rough-in housing: 2-7/8″ dia. x 5.1″ deep (7.3 x 13 cm)
     
  • Wall-Mounted Brass Downlight
    • Remote transformer required for 12V
    • Certified for indoor (12V) or outdoor use
    Voltage 12V, 120V, 230V
    Lamps Integrated LED light engine, MR16 LED
    Lumens 372 max
    CCT 1000K
    1300K
    1500K
    Dimensions 5.9"/14.9 cm tall (MR16), 6.6"/16.8 cm tall (light engine)
    2.4" dia lamp body x 3.7" extension from wall (6 x 9.3 cm)
     
  • Solid Brass, All-purpose, Low-voltage LED Double Directional on Brass Riser The E16-S is a low-voltage, double-directional luminaire with integrated, replaceable LED light engines.  The light engines features four output settings from 100% to 25%, adjustable in the field.
    • Can be aimed up or down
    • Ideal for tall groundcover
    • Remote transformer required.
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 799 max
    CCT 1000K (Red-Orange, 630nm)
    1500K (Amber, 595nm)
    2700K
    3000k
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 4.9" (12.4 cm)
  • Solid Brass Square Uplight
    • Can be used as an uplight, steplight, or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens 206 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2.17″ square x 3.14" depth (5.5 x 8 cm)
  • Solid Brass Square Louvered Steplight
    • Can be used as an uplight, steplight, or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens 15.4 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2.17″ square x 3.14" depth (5.5 x 8 cm)
     
  • Solid Brass, Low-Profile, Hanging Downlight
    • Supplied with 20″ stainless steel cable, 36″ lead wire, and 1/2″ male fitting for mounting accessory
    • Can also be hung directly by loop
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 249 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 1.6″ dia. x  3.25" (4.2 x 8.3 cm)
  • Solid Brass Decorative Hanging Downlight
    • Supplied with 20″ stainless steel cable, 36″ lead wire, and 1/2″ male fitting for mounting accessory
    • Can also be hung directly by loop
    • Remote transformer required
    Voltage 12V
    Lamps LED
    CCT 2700K
    3000K
    Dimensions 2″ (5.1 cm) diameter
    Length: 4.6″ (11.7 cm) for 2x4.5
    Length: 9.1″ (23.1 cm) for 2x9
  • We often have the ability to customize an existing design or create a new fixture based on your ideas.  We welcome your inquiries.
  • Solid Brass Round Steplight / Uplight
    • Remote transformer required
    • Mountable as a steplight, uplight, or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring diameter is 3.8″ (9.6 cm) and fixture depth increases to 5.3″ (13.5 cm).   [E9-R-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    Lumens 630 max
    CCT 1000K
    1300K
    1500K
    2700K
    3000K
    Dimensions 3.5" trim dia. x 5.0" depth (8.9 x 12.6 cm)
  • Solid Brass Round Louvered Steplight
    • Remote transformer required
    • Mountable as a steplight, uplight, or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring diameter is 3.8″ (9.6 cm) and fixture depth increases to 5.3″ (13.5 cm).   [E9-RL-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 3.5" trim dia. x 5.0" depth (8.9 x 12.6 cm)
     
  • Solid Brass Rectangular Steplight / Uplight
    • Remote transformer required
    • Mountable as a steplight, uplight, or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring is 3.3 x 4.3″ (8.3 x 10.9 cm) and fixture depth increases to 5.3″ (13.5 cm).   [E9-RC-CR]
    1500K
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    Lumens 630 max
    CCT 1000K
    1300K
    1500K
    2700K
    3000K
    Dimensions 3 x 4" trim, 5.0" depth (7.6 x 10.2 cm, 12.6 cm)
  • Solid Brass Rectangular Louvered Steplight
    • Remote transformer required
    • Mountable as a steplight, uplight, or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring is 3.3 x 4.3″ (8.3 x 10.9 cm) and fixture depth increases to 5.3″ (13.5 cm).   [E9-RCL-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 3 x 4" trim, 5.0" depth (7.6 x 10.2 cm, 12.6 cm)
     
  • Solid Brass Square Steplight / Uplight
    • Remote transformer required
    • Mountable as a steplight, uplight, or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring is 4.3″ square (10.9 cm) and fixture depth increases to 5.3″ (13.5 cm).   [E9-SQ-CR]
    1500K
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    Lumens 630 max
    CCT 1000K
    1300K
    1500K
    2700K
    3000K
    Dimensions 4" square trim x 5.0" depth (10 x 12.6 cm)
  • Solid Brass Square Louvered Steplight
    • Remote transformer required
    • Mountable as a steplight, uplight, or downlight
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring is 4.3″ square (10.9 cm) and fixture depth increases to 5.3″ (13.5 cm).   [E9-SQL-CR]
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 4" square trim x 5.0" depth (10 x 12.6 cm)
     
  • 150- / 300- / 600-Watt Direct Burial Transformers The DB-series are in-grade transformers for use with remotely mounted fixtures.  They are made from compression-molded, fiberglass-reinforced polyester that is resistant to rust, corrosion, oils, gasoline, and detergents.  Housing cover is fully gasketed to provide a watertight seal. Dimensions: 7.4" x 11.8" x 4.5" (18.8 x 30 x 11.4 cm) Specifications Instructions
    DB150 150 watts
    DB300 300 watts
    DB600 600 watts
  • 2-Piece Brass Surface Box mount for concrete and wood installation of landscape lighting fixtures
    • Cast brass cover and mounting collar
    • Dimensions: 2" high x 4.2" diameter [5.0 x 10.6cm]
    • One 1/2" tap for fixture mounting
    • Includes three 3/8" stainless steel lag screws shields
    Specifications Instructions Template for Anchor Bolts & Conduit Positioning
  • Rough Sand Cast Round Brass Canopy with Convex Contour
    • 4.5" canopy diameter x 0.7" height (11.4 x 1.7 cm)
    • This series must be used if a SMB accessory is specified
    CM Substitution accessory for L-013 & L-014 Series fixtures, slip-fit center hole
    CM1 Substitution accessory for L-011-CM1, one center 1/2" tap
    CM2 Substitution accessory for L-011-CM2, two 1/2" taps
    CM3 Substitution accessory for L-011-CM2 with motion sensor, three 1/2" taps
     
    Specifications
  • Machined Round Brass Canopy Standard mounting plate with all Beachside wall mount fixtures.
    • 4.75" diameter x 0.5" thick (12.1 x 1.4 cm)
    • Supplied with brass crossbar for standard 2.75" and 3.5" hole spacing and single-gang boxes.
    • Supplied with gasket and black stainless steel screws
    CM-M One slip-fit center hole.  Standard with L-013, L-014, L-023, & L-024
    CM-M1 One 1/2" tap for single fixture.  Standard with L-011-CM1
    CM-M2 Two 1/2" taps for dual fixture.  Standard with L-011-CM2
    CM-M3 Three 1/2" taps for dual fixture + Motion Sensor.  Standard with L-011-CM2 with MS.
     
    Specifications Brass Crossbar Specifications (included with canopy)
  • Low-Profile Round Brass Canopy For Monopoint Directional Fixtures Using SA Accessory
    • 3.25" dia. x 0.375" tall (8.3 cm x 9.5 mm)
    • Includes corrosion-resistant brass wood screws
    Specifications
  • CTO – Color Temperature Orange Warming Filters The CTO filters allow warming of the starting color temperature, ranging from ¼ (warming approximately 300 CCT) to ¾ (warming approximately 700 CCT).  Each of the three choices are available in three different diameters, depending on with which luminaire the filter is used. Specifications
  • The frosted lens softens the effect of a directional lamp.  A 70% light transmission is typically produced with a frosted glass lens. Specifications
    FR Removable frosted lens accessory for E9 series, E16 series, L-009, L-011 Series, L-012, L-013-S, L-014-S.  Includes stainless steel snap ring
    FR8 Removable frosted lens accessory for E1, E1-S, E2, E3 series, E4, E8 series, X1, X1-S, X2, X2-S.  Includes stainless steel snap ring
    FR-LBTZ Light engine-attached frosted lens for L-010, L-016 series
    FR-MR16 Lamp-attached frosted lens for L-010, M30 (12V), L-016 series
  • GL100- / 200-Watt  Magnetic Transformers The GL-series are stainless steel magnetic transformers, ideal for LED applications.
    • Multi-Volt output (12V AC & 15V AC)
    • Single circuit with two common taps
    • Stainless Steel Housing with gasketed cover
    • Circuit breaker protection
    • 6-foot plug-in power cord
    • X-10 remote control compatibility
    • Dimmable with inductive magnetic low-voltage dimmers only, such as Lutron #NLV1500
    Do not use incandescent or resistive load dimmers. Dimensions: 14" x 6.5" x 5.5" (35.6 x 16.5 x 14 cm)  *Design with double-hinged swing door updated January 2022.
    GL100 100 watts
    GL200 200 watts
  • Beachside Lighting’s brass glare shields provide glare reduction for both architectural and landscape fixtures.
  • Heavy Duty PVC Ground Spike with Stabilizing Grid
    • Ideal for heavier or taller landscape lighting fixtures or areas with sandy soil.
    • Rated for 12 or 120 Volts
    • Overall Height: 19.0" (48 cm)
    Specifications
  • Heavy Duty PVC Ground Spike with Stabilizing Grid and Brass Cap
    • Cast brass cap for additional strength
    • Ideal for heavier or taller landscape lighting fixtures or areas with sandy soil.
    • Rated for 12 or 120 Volts
    • Overall Height: 19.0" (48 cm)
    Specifications
  • Heavy-Duty Ground Spike with Brass Cap for Telescoping Stem With this product, the landscape fixture's own stem is recessed down into the ground spike.   As the ground cover grows taller, the fixture can be raised to match.
    • Ideal for new landscapes with moderate anticipated ground cover growth
    • Minimum height above cap: 1.3" (3.3 cm)
    • Maximum height above cap: stem height + height of the fixture.  Up to 20” range between minimum and maximum height.  For example, a fixture on a fully extended 30” riser can be lowered to not less than 10” above grade.
    • Height of Ground Spike, including cap and set screw fitting: 20.3" (51 cm), 3.5" (8.9 cm) of which is above ground
    Specifications Instructions
  • Beachside Lighting's Standard Ground Spike
    • Die cast brass cap and 3/16" thick PVC spike
    • Ideal for light- to medium-weight fixtures
    • Overall Height:  9.1" (23 cm)
    Specifications
  • Half shield options for select pathlights and bollards allowing just partial illumination for instances where shielding is needed. Specifications
    HS1 Half shield for L-021 & L-022 bollards
    HS17-1 Shield for L-017 drive-over marker light — allows one 60° sector of illumination
    HS17-2 Shield for L-017 — allows two 60° illuminated sectors
    HSM Half shield with top cap for M-Series pathlights and MB-Series bollards
    HSM-LED Half shield for M- and MB-Series LED
    HSR Half shield for R-Series pathlights
    HS-MB2 Half shield for MB2 bollard
    HS-MB4 Half shield for MB4 bollard
    HS-MB4-270 Shield for MB4 bollard allowing only 90° illumination
  • Honeycomb louvers reduce glare from directional fixtures and have a 95% open area.  Lamp-attached honeycomb louvers are secured to the lamp with a clip-on mount.  Others are secured inside the fixture with a stainless steel snap ring (included).
    HL1 Honeycomb louver for L-009, L-013-S, L-014-S, and E16 & L-011 series, 1/8" thick
    HL2 Honeycomb louver for L-009, L-013-S, L-014-S, and E16 & L-011 series, 1/4" thick
    HL8 Honeycomb louver for E1, E2, E3, E4, E8, X1, and X1-S fixtures, 1/8" thick
    HL-LBTZ Light engine-attached honeycomb louver for L-010 and L-016 series, 1/8" thick
    HL-MR16 MR-16 lamp-attached honeycomb louver for L-010, M30 (12V), and L-016 Series, 1/8" thick
  • Cast brass junction box
    • Ideal for concrete installation for landscape lighting fixtures
    • Dimensions: 3.8" dia. x 3” tall (7.5 x 9.5 cm)
    • Two 3/4" taps on opposing sides
    • Two 3/4" taps on bottom
    • Includes stainless steel screws
    JB:  Cover has one 1/2" tap JB2:  Cover has two 1/2" taps Specifications
  • Brass Bell-Type Hanging Downlight
    • Remote transformer required
    • Durable construction: all brass components
    • Supplied with 36″ lead wire.  Can be hung from wire or loop
    Voltage 12V AC
    Lamps LED
    CCT 2700K
    3000K
    Dimensions 3.5″ dia. x 3.3″ height (8.9 x 8.3 cm) w/o loop
  • All Brass In-Grade Uplight The L-009 is a fixed-position brass well light for in-ground uplighting applications where a low profile is needed.  An optional brass glare shield can be installed in the field.
    • Remote transformer required.
    Voltage 12V AC
    Lamps MR16 LED
    Lumens 525 max
    CCT 1500K
    CCT 2700K
    CCT 3000K
    Dimensions 4.4″ dia x 1.2" exposed height (11.1 x 2.9 cm)
    7.3” depth below grade (18.5 cm)
  • Brass & Composite In-Ground Aimable Uplight The L-010 series in-ground drive-over fixtures are brass & composite uplights for high-traffic areas.  An internal bracket assembly allows 360° rotation and angling of the lamp up to 16° before any cutoff.
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring diameter is 6.7″ (17cm) and exposed height reduces reduces to 0.3" (0.8 cm).   [L-010-CR, L-010-C-CR]
    • Remote transformer required for 12V
    Voltage 12V, 120v, 230V
    Lamps  Integrated LED, MR16 LED
    Lumens 799 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 6.5″ dia. x 0.6″ exposed height (16.5 x 1.3 cm)
  • Solid Brass, All-Purpose Directional
    • Lamp is recessed for glare reduction on 12V unshielded versions
    • Stepped glass allows flush surface to prevent collection of dirt/debris
    • Angled and full cutoff glare shields available
    • Remote transformer required for 12V
    Voltage 12V, 120V, 230V
    Lamps MR16 LED
    Lumens 630 max
    CCT 1500K
    2700K
    3000K
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 4.9″ (12.4 cm)
  • Solid Brass, All-Purpose Directional
    • Directional downlight certified by International Dark Sky Association when mounted on VERTICAL surface and aimed downward. This fixture will not work nor be Dark Sky compliant if mounted to a horizontal surface such as the ground or ceiling.
    • Fixture comes standard with angled glare shield and Sure Aim accessory
    • Knuckle can be angled from 0 (straight down) to a maximum of 30o from vertical
    • Remote transformer required for 12V
    Voltage 12V, 120V, 230V
    Lamps MR16 LED
    Lumens 630 max
    CCT 1500K
    2700K
    3000K
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 7.3″ (18.4 cm)
     
  • Solid Brass Fixed Downlight
    • Lamp is recessed for glare reduction
    • Remote transformer required for 12V
    Voltage 12V, 120V, 230V
    Lamps Integrated LED, MR16 LED & Halogen
    Lumens 791 max (11W)
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2.4" dia. body x 4.75" dia. base x 4.7″ (6 x 12.1 x 12 cm)
     
  • Solid Brass Canopy-Mounted Directional
    • Lamp is recessed for glare reduction on 12V unshielded versions
    • Remote transformer required for 12V
    Voltage 12V, 120V, 230V
    Lamps MR16 LED
    Lumens 630 max
    CCT 1500K
    2700K
    3000K
    Dimensions Diameter: 2.4" (6 cm)
    Length from knuckle pivot: 4.9″ (12.4 cm)
  • Solid Brass Canopy-Mounted Double Directional
    • Lamp is recessed for glare reduction on 12V unshielded versions
    • Remote transformer required for 12V
    Voltage 12V, 120V, 230V
    Lamps MR16 LED
    Lumens 630 max (per lamp)
    CCT 1500K
    2700K
    3000K
    Dimensions Diameter: 2.4" (6 cm)
    Length from knuckle pivot: 4.9″ (12.4 cm)
  • Solid Brass Hanging Downlight
    • Supplied with 20″ stainless steel cable, 36″ lead wire, and 1/2″ male fitting for mounting accessory
    • Can also be hung directly by loop
    • Remote transformer required
    Voltage 12V AC
    Lamps MR16 LED & Halogen
    Lumens 630 max (LED)
    CCT 1500K
    2700K
    3000K
    Dimensions 2.4″ dia. x 4.2" (6 x 10.6 cm)
  • Solid Brass Hanging Downlight with Glow Snoot
    • Supplied with 20" stainless steel cable, 36" lead wire, and 1/2" male fitting for mounting accessory
    • Also can be hung directly by loop
    • Remote transformer required
    Voltage 12V AC
    Lamps MR16 LED & Halogen
    Lumens 630 max (LED)
    CCT 1500K
    2700K
    3000K
    Dimensions 2.4″ dia. x 8.4" (6 x 21.3 cm)
  • Solid Brass, All-Purpose, Low-Voltage Directional with Extended Snoot — Downlighting Applications Only For uplighting applications, use standard L-011 with BGSF full-cutoff glare shield, which has weep hole.
    • Lamp is recessed for glare reduction.  Ideal for lamps with a maximum beam spread of 40°.
    • Remote transformer required for 12V.
    Voltage 12V, 120V, 230V
    Lamps MR16 LED
    Lumens 630 max
    CCT 1500K
    2700K
    3000K
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 5.9″ (14.9 cm)
  • Brass Outdoor Gobo Pattern Projector
    • Fixture uses stainless steel gobos (51.5 mm overall diameter) to project a pattern onto ground or wall
    • Remote transformer required for 12 Volt
    Voltage 12V, 120V, 230V
    Lamps MR16 LED & Metal Halide
    CCT 2700K
    3000K
    Dimensions 2.5″ diameter (6.3 cm)
    Overall length from knuckle pivot: 5.9″ (14.9 cm) for 12 Volt, 7.8″ (19.9 cm) for 120/230 Volt
  • Ceiling-Mounted Brass Outdoor Gobo Pattern Projector Downlight
    • Fixture uses stainless steel gobos (51.5 mm overall diameter) to project a pattern onto ground or wall
    • Remote transformer required for 12 Volt
    Voltage 12V, 120V, 230V
    Lamps MR16 LED & Metal Halide
    CCT 2700K
    3000K
    Dimensions 2.5″ dia. lamp housing (6.3 cm), 4.75″ dia. canopy (12.1 cm)
    Overall height: 5.6″ (14.4 cm) for 12 Volt, 7.6″ (19.5 cm) for 120/230 Volt

Title

Go to Top