2 Watt Amber LED module (1600K) certified by Florida Fish & Wildlife Conservation Commission as "Wildlife Friendly".
| 2W-A-SP | 10° |
| 2W-A-NFL | 30° |
| 2W-A-FL | 50° |
-
2 Watt Amber LED module (1600K) certified by Florida Fish & Wildlife Conservation Commission as "Wildlife Friendly".
-
2 Watt Red-Orange LED module (1000K) approved by Florida Fish & Wildlife Conservation Commission as "Wildlife Friendly".
2W-RO-SP 10° 2W-RO-NFL 30° 2W-RO-FL 50° 2W-RO-NO No Optic -
7-Watt Amber LED module (1400K) certified by Florida Fish & Wildlife Conservation Commission as "Wildlife Friendly"
7W-A-SP 10° 7W-A-NFL 30° 7W-A-FL 50° -
7-Watt Amber LED module (1000K) approved by Florida Fish & Wildlife Conservation Commission as "Wildlife Friendly"
8W-RO-SP 10° 8W-RO-NFL 30° 8W-RO-FL 50° -
2-Piece Brass Surface Box mount for concrete and wood installation of landscape lighting fixtures- Cast brass cover and mounting collar
- Dimensions: 2" high x 4.2" diameter [5.0 x 10.6cm]
- One 1/2" tap for fixture mounting
- Includes three 3/8" stainless steel lag screws shields
-
Rough Sand Cast Round Brass Canopy with Convex Contour- 4.5" canopy diameter x 0.7" height (11.4 x 1.7 cm)
- This series must be used if a SMB accessory is specified
SpecificationsCM Substitution accessory for L-013 & L-014 Series fixtures, slip-fit center hole CM1 Substitution accessory for L-011-CM1, one center 1/2" tap CM2 Substitution accessory for L-011-CM2, two 1/2" taps CM3 Substitution accessory for L-011-CM2 with motion sensor, three 1/2" taps -
Machined Round Brass Canopy Standard mounting plate with all Beachside wall mount fixtures.- 4.75" diameter x 0.5" thick (12.1 x 1.4 cm)
- Supplied with brass crossbar for standard 2.75" and 3.5" hole spacing and single-gang boxes.
- Supplied with gasket and black stainless steel screws
Specifications Brass Crossbar Specifications (included with canopy)CM-M One slip-fit center hole. Standard with L-013, L-014, L-023, & L-024 CM-M1 One 1/2" tap for single fixture. Standard with L-011-CM1 CM-M2 Two 1/2" taps for dual fixture. Standard with L-011-CM2 CM-M3 Three 1/2" taps for dual fixture + Motion Sensor. Standard with L-011-CM2 with MS. -
Low-Profile Round Brass Canopy For Monopoint Directional Fixtures Using SA Accessory- 3.25" dia. x 0.375" tall (8.3 cm x 9.5 mm)
- Includes corrosion-resistant brass wood screws
-
CTO – Color Temperature Orange Warming Filters The CTO filters allow warming of the starting color temperature, ranging from ¼ (warming approximately 300 CCT) to ¾ (warming approximately 700 CCT). Each of the three choices are available in three different diameters, depending on with which luminaire the filter is used. Specifications -
We often have the ability to customize an existing design or create a new fixture based on your ideas. We welcome your inquiries. -
150- / 300- / 600-Watt Direct Burial Transformers The DB-series are in-grade transformers for use with remotely mounted fixtures. They are made from compression-molded, fiberglass-reinforced polyester that is resistant to rust, corrosion, oils, gasoline, and detergents. Housing cover is fully gasketed to provide a watertight seal. Dimensions: 7.4" x 11.8" x 4.5" (18.8 x 30 x 11.4 cm) Specifications InstructionsDB150 150 watts DB300 300 watts DB600 600 watts -
Solid Brass Low-Voltage Fixed Downlight- Ideal for post mounting
- Remote transformer required
- Custom canopy from 1/8″ thick brass available. Consult factory with size, shape, and thru hole orientation needed.
Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V) Lamps Integrated LED Lumens 249 max CCT 1000K 1500K 2700K 3000K Dimensions 2" dia. x 3.8″ x 1.9” extension (5.1 x 9.7 x 4.8 cm) 
-
Solid Brass Low-Voltage Fixed Downlight
- Ideal for post mounting
- Remote transformer required
- Custom canopy from 1/8″ thick brass available. Consult factory with size, shape, and thru hole orientation needed.
Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V) Lamps Integrated LED Lumens 123 max CCT 1000K 1500K Dimensions 2" dia. x 3.8″ x 1.9” extension (5.1 x 9.7 x 4.8 cm) -
Solid Brass, Low-Voltage, Stem-Mounted Path Light- Ideal for walkways and tall groundcover
- Remote transformer required
- Custom stem lengths available
Voltage 12 Volts AC with integral driver (9 – 15V input, dimmable below 9V) Lamps Integrated LED Lumens max 98 CCT 1000K 1500K 2700K 3000K Dimensions Lamp Housing: 1.6” diameter x 3.1" [4.2 x 7.8 cm] -
Solid Brass, Low-Voltage, Stem-Mounted Path Light- Ideal for walkways and tall groundcover
- Remote transformer required
- Custom stem lengths available
Voltage 12 Volts AC with integral driver (9 – 15V input, dimmable below 9V) Lamps Integrated LED Lumens max 32 CCT 1000K 1500K Dimensions Lamp Housing: 1.6” diameter x 3.1" [4.2 x 7.8 cm] -
Solid Brass, All-Purpose, In-Grade Uplight- Adjustable angle up to 30°
- Remote transformer required
Voltage 12V AC/DC Lamps MR16 LED Lumens 630 max CCT 1500K 2700K 3000K Dimensions 4″ dia. x 7.9” depth (10.2 x 20 cm) -
Solid Brass, All-Purpose, Low-Voltage LED Canopy-Mounted Directional The E16 is a low-voltage directional luminaire with an integrated, replaceable LED light engine. The light engine features four output settings from 100% to 25%, adjustable in the field.- Remote transformer required
Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V) Lamps Integrated LED Lumens 799 max CCT 1000K (Red-Orange, 630nm) 1500K (Amber, 595nm) 2700K 3000k Dimensions Diameter: 2.4" (6 cm) Overall length from knuckle pivot: 4.9" (12.4 cm) -
Solid Brass, All-purpose, Low-voltage LED Directional The E16 is a low-voltage directional luminaire with an integrated, replaceable LED light engine. The light engine features four output settings from 100% to 25%, adjustable in the field.- Remote transformer required
Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V) Lamps Integrated LED Lumens 799 max CCT 1000K (Red-Orange, 630nm) 1500K (Amber, 595nm) 2700K 3000k Dimensions Diameter: 2.4" (6 cm) Overall length from knuckle pivot: 4.9" (12.4 cm) -
Solid Brass, All-purpose, Low-voltage LED Directional The E16-30-BGS-SA is a low-voltage directional luminaire with an integrated, replaceable LED light engine. The warm white light engines features four output settings from 100% to 25%, adjustable in the field.- Directional downlight certified by International Dark Sky Association when mounted on VERTICAL surface and aimed downward. This fixture will not work nor be Dark Sky compliant if mounted to a horizontal surface such as the ground or ceiling.
- Fixture comes standard with angled glare shield and Sure Aim accessory
- Knuckle can be angled from 0o (straight down) to a maximum of 30o from vertical
- Remote transformer required
Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V) Lamps Integrated LED Lumens 799 max CCT 1000K (Red-Orange, 630nm) 1500K (Amber, 595nm) 2700K 3000K Dimensions Diameter: 2.4" (6 cm) Overall length from knuckle pivot: 7.3" (18.4 cm) -
Solid Brass, All-purpose, Low-voltage LED Directional The E16-30-BGS-SA-WL is a low-voltage directional luminaire with an integrated, replaceable LED light engine.
- Directional downlight certified by International Dark Sky Association when mounted on VERTICAL surface and aimed downward. This fixture will not work nor be Dark Sky compliant if mounted to a horizontal surface such as the ground or ceiling.
- Fixture comes standard with angled glare shield and Sure Aim accessory
- Knuckle can be angled from 0o (straight down) to a maximum of 30o from vertical
- Remote transformer required
Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V) Lamps Integrated LED Lumens 372 max CCT 1000K (Red-Orange, 630nm) 1500K (Amber, 595nm) Dimensions Diameter: 2.4" (6 cm) Overall length from knuckle pivot: 7.3" (18.4 cm) -
Solid Brass, Low-Voltage Hanging Downlight- Supplied with 20″ stainless steel cable, 36″ lead wire, and 1/2″ male fitting for mounting accessory
- Can also be hung directly by loop
- Remote transformer required
Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V) Lamps Integrated LED Lumens 799 max CCT 1000K 1500K 2700K 3000K Dimensions 2.4″ dia. x 4.2" (6 x 10.6 cm) -
Solid Brass, All-purpose, Low-voltage LED Double Directional on Brass Riser The E16-S is a low-voltage, double-directional luminaire with integrated, replaceable LED light engines. The light engines features four output settings from 100% to 25%, adjustable in the field.- Can be aimed up or down
- Ideal for tall groundcover
- Remote transformer required.
Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V) Lamps Integrated LED Lumens 799 max CCT 1000K (Red-Orange, 630nm) 1500K (Amber, 595nm) 2700K 3000k Dimensions Diameter: 2.4" (6 cm) Overall length from knuckle pivot: 4.9" (12.4 cm) -
Solid Brass, Low-profile Marker Light- Remote transformer required
- In-ground or concrete installation
Voltage 12 Volts AC / DC Lamps Integrated LED, MR16 LED CCT 1000K 1500K 2700K 3000K Dimensions 3.5″ diameter x 5.3” depth [8.9 x 13.5 cm] 3.8″ [9.6 cm] trim ring outer diameter E17 Four-Sector Illumination (standard) E17-1 Single-Sector Illumination E17-2 Two-Sector, Adjacent Illumination E17-OP Two-Sector, Opposite Illumination
(Amber Only) -
Solid Brass, Low-profile Marker Light- Remote transformer required
- In-ground or concrete installation
Voltage 12 Volts AC / DC Lamps Integrated LED, MR16 LED CCT 1000K 1500K Dimensions 3.5″ diameter x 5.3” depth [8.9 x 13.5 cm] 3.8″ [9.6 cm] trim ring outer diameter E17 Four-Sector Illumination (standard) E17-1 Single-Sector Illumination E17-2 Two-Sector, Adjacent Illumination E17-OP Two-Sector, Opposite Illumination -
Solid Brass Low-Voltage Fixed Downlight- Remote transformer required
Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V) Lamps Integrated LED Lumens 249 max CCT 1000K 1500K 2700K 3000K Dimensions 1.6" dia. body x 2.8" dia. base x 4″ (4.2 x 7 x 10.2 cm) -
Solid Brass Low-Voltage Fixed Downlight
- Remote transformer required
Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V) Lamps Integrated LED Lumens 123 max CCT 1000K 1500K Dimensions 1.6" dia. body x 2.8" dia. base x 4″ (4.2 x 7 x 10.2 cm) -
Solid Brass Low-Profile Marker Light- Remote transformer required
Voltage 12 Volts AC/DC with integral driver (9-15V input, dimmable below 9V) Lamps Integrated LED, MR11 LED Lumens max 15 CCT 1000K 1500K 2700K 3000K Dimensions Dome diameter: 2.19" [5.6 cm] Depth: 3.14" [8.0 cm] E3-M Four-Sector Illumination (standard) E3-M-1 Single-Sector Illumination E3-M-2 Two-Sector, Adjacent Illumination E3-M-OP Two-Sector, Opposite Illumination
(Amber Only) -
Solid Brass Low-Profile Marker Light- Remote transformer required
Voltage 12 Volts AC/DC with integral driver (9-15V input, dimmable below 9V) Lamps Integrated LED, MR11 LED Lumens max 5.6 CCT 1000K 1500K Dimensions Dome diameter: 2.19" [5.6 cm] Depth: 3.14" [8.0 cm] E3-M Four-Sector Illumination (standard) E3-M-1 Single-Sector Illumination E3-M-2 Two-Sector, Adjacent Illumination E3-M-OP Two-Sector, Opposite Illumination