• Solid Brass Low-Voltage Fixed Downlight
    • Ideal for post mounting
    • Remote transformer required
    • Custom canopy from 1/8″ thick brass available.  Consult factory with size, shape, and thru hole orientation needed.
    Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 249 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2" dia. x 3.8″ x 1.9” extension (5.1 x 9.7 x 4.8 cm)
     
  • Solid Brass Low-Profile Marker Light
    • Remote transformer required
    Voltage 12 Volts AC/DC with integral driver (9-15V input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens max 15
    CCT 1500K
    2700K
    3000K
    Dimensions Dome diameter: 2.19" [5.6 cm]
    Depth: 3.14" [8.0 cm]
     
    E3-M Four-Sector Illumination (standard)
    E3-M-1 Single-Sector Illumination
    E3-M-2 Two-Sector, Adjacent Illumination
    E3-M-OP Two-Sector, Opposite Illumination
     
    (Amber Only)
  • Solid Brass, Low-profile Marker Light
    • Remote transformer required
    • In-ground or concrete installation
    Voltage 12 Volts AC / DC
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 3.5″ diameter x 4.4” depth [8.9 x 11.3 cm]
    3.8″ [9.6 cm] trim ring outer diameter
     
    E17 Four-Sector Illumination (standard)
    E17-1 Single-Sector Illumination
    E17-2 Two-Sector, Adjacent Illumination
    E17-OP Two-Sector, Opposite Illumination
     
    (Amber Only)
  • Brass & Composite In-Ground Pathlight for High Traffic & Drive-Over Applications The L-017 series in-ground drive-over fixtures are brass & composite pathlights for high-traffic areas. This low-profile fixture is ideal for paths with low ground cover and along pathways used by golf carts, service trucks, or automobiles at country clubs & resorts.
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring diameter is 6.7″ (17cm) and exposed height reduces to 1.7″ (4.2 cm).   [L-017-CR, L-017-C-CR]
    • Remote transformer required for 12V
    Voltage 12V, 120v, 230V
    Lamps MR16 LED
    CCT 1500K
    3000K
    Dimensions 6.5″ dia. x 1.9″ exposed height (16.5 x 4.9 cm)
     
    (Amber Only)
  • Solid Brass, Low-Voltage, Stem-Mounted Path Light
    • Ideal for walkways and tall groundcover
    • Remote transformer required
    • Custom stem lengths available
    Voltage 12 Volts AC with integral driver (9 – 15V input, dimmable below 9V)
    Lamps Integrated LED
    Lumens max 98
    CCT 1500K
    2700K
    3000K
    Dimensions Lamp Housing: 1.6” diameter x 3.1"  [4.2 x 7.8 cm]
     
  • Brass Bell-Type Pathlight The L-004 is a bell-type path light made from brass and copper.  Ideal for walkway and area lighting in any landscape theme and location.
    • Remote transformer required
    • Durable construction: all brass components with copper bell shade
    • CSA Listed to US and Canadian safety standards, file #190030
    Voltage 12V AC
    Lamps LED
    CCT 2700
    3000
    Dimensions 23 inch (58.4cm) overall height
  • Beachside Lighting’s M-Series Pathlights are the ultimate in heavy-duty landscape lighting.  Made of cast brass, these fixtures are larger than other Beachside pathlights.  The lamp is protected by a threaded glass lens.  Louvers are angled at 45° to eliminate glare.  Risers are schedule 80 brass pipe.  Lamp sources include omnidirectional LED and metal halide.  MR16 LED versions with a single-louver design also are available. M-series pathlights with amber and red-orange LED lamps are certified as “Wildlife Friendly” by the Florida Fish & Wildlife Conservation Commission.  To view these fixtures click HERE.
    • Durable construction: all brass components
    • Stems available in three sizes: 16″, 20″ (standard), & 24
    • CSA Listed to US and Canadian safety standards, file #190030
    Voltage 12V, 120V
    Lamps LED, Metal Halide
    CCT 2700
    3000
     
  • Solid Brass, All-Purpose, In-Grade Uplight
    • Adjustable angle up to 30°
    • Remote transformer required
    Voltage 12V AC/DC
    Lamps MR16 LED
    Lumens 630 max
    CCT 1500K
    2700K
    3000K
    Dimensions 4″ dia. x 7.9” depth (10.2 x 20 cm)
  • Beachside Lighting’s M-Series LED Pathlights are the ultimate in heavy-duty landscape lighting.  Made of cast brass, these fixtures are larger than other Beachside pathlights.  The lamp is protected by a threaded glass lens.  Louvers are angled at 45° to eliminate glare.  Risers are schedule 80 brass pipe.  M-series fixtures with a single-louver design use a directional LED source and reflector.  A traditional multi-louver design also is available with omnidirectional LED and metal halide light sources. M-series pathlights with amber and red-orange LED lamps are certified as “Wildlife Friendly” by the Florida Fish & Wildlife Conservation Commission.  To view these fixtures click HERE.
    • Durable construction: all brass components
    • Stems available in three sizes: 16″, 20″ (standard), & 24
    • CSA Listed to US and Canadian safety standards, file #190030
    Voltage 12V, 120V, 230V
    Lamps LED
    CCT 1000
    1500
    2700
    3000
     
  • Beachside Lighting’s R-Series Pathlights have set the standard for durability in low-voltage walkway and area lighting.  The completely sealed fixture allows easy access to the brass lamp compartment for tool-free relamping.  Features include an 18-gauge copper shade, a 5 mm-thick frosted glass lens, and a riser made from schedule 40 brass pipe.  The lamping is G4 bi-pin LED.  The omnidirectional lamping allows for a lower profile, with most shade heights positioned so their lower edge is at the bottom of the glass, resulting in low-to-no glare. All fixtures are CSA Listed to US and Canadian safety standards, file #190030.
    • 12 Volts AC
    • Remote transformer required
    • Durable construction: all brass components and copper shades
    Voltage 12V AC
    Lamps Omnidirectional LED
    CCT 1500K
    2700K
    3000K
     
  • Solid Brass Low-Voltage Fixed Downlight
    • Remote transformer required
    Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 249 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 1.6" dia. body x 2.8" dia. base x 4″ (4.2 x 7 x 10.2 cm)
     
  • Beachside Lighting’s R-Series LED Pathlights have set the standard for durability in low-voltage walkway and area lighting.  The completely sealed fixture allows easy access to the brass lamp compartment for tool-free relamping.  Features include an 18-gauge copper shade, a 5 mm-thick frosted glass lens, and a riser made from schedule 40 brass pipe.  The lamping is MR16 LED, allowing both 12V and 120V/230V options.  The upward-directed lamp hits a reflector in the shade assembly.  Most shade heights are positioned so their lower edge is at the bottom of the glass, resulting in low-to-no glare. All fixtures are CSA Listed to US and Canadian safety standards, file #190030.
    • Durable construction: all brass components and copper shades
    Voltage 12V, 120V, 230V
    Lamps LED
    CCT 1000K
    1500K
    2700K
    3000K
     
  • Solid Brass Round Uplight
    • Can be used as an uplight, steplight, or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens 206 max
    CCT 1500K
    2700K
    3000K
    Dimensions 2.17″ dia. x 3.14" depth (5.5 x 8 cm)
    Depth: 3.14″ (8.0cm)
  • 4 Watt Amber LED module (1350K) approved by Florida Fish & Wildlife Conservation Commission as "Wildlife Friendly"  
    4W-A-SP 10°
    4W-A-NFL 30°
    4W-A-FL 50°
  • 7-Watt Amber LED module (1500K) certified by Florida Fish & Wildlife Conservation Commission as "Wildlife Friendly"  
    7W-A-SP 10°
    7W-A-NFL 30°
    7W-A-FL 50°
  • 7-Watt Amber LED module (1000K) approved by Florida Fish & Wildlife Conservation Commission as "Wildlife Friendly"  
    8W-RO-SP 10°
    8W-RO-NFL 30°
    8W-RO-FL 50°
  • Solid Brass, Low-Voltage, Stem-Mounted Path Light
    • Ideal for walkways and tall groundcover
    • Remote transformer required
    • Custom stem lengths available
    Voltage 12 Volts AC with integral driver (9 – 15V input, dimmable below 9V)
    Lamps Integrated LED
    Lumens max 32
    CCT 1500K
    Dimensions Lamp Housing: 1.6” diameter x 3.1"  [4.2 x 7.8 cm]
     
  • Solid Brass, Low-profile Marker Light
    • Remote transformer required
    • In-ground or concrete installation
    Voltage 12 Volts AC / DC
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    Dimensions 3.5″ diameter x 4.4” depth [8.9 x 11.3 cm]
    3.8″ [9.6 cm] trim ring outer diameter
     
    E17 Four-Sector Illumination (standard)
    E17-1 Single-Sector Illumination
    E17-2 Two-Sector, Adjacent Illumination
    E17-OP Two-Sector, Opposite Illumination
     
  • Solid Brass Round Louvered Steplight
    • Can be used as an uplight, steplight, or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens 10.7 max
    CCT 1500K
    2700K
    3000K
    Dimensions 2.17″ dia. x 3.14" depth (5.5 x 8 cm)
     
  • Solid Brass Low-Voltage Fixed Downlight
    • Ideal for post mounting
    • Remote transformer required
    • Custom canopy from 1/8″ thick brass available.  Consult factory with size, shape, and thru hole orientation needed.
    Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 123 max
    CCT 1000K
    1500K
    Dimensions 2" dia. x 3.8″ x 1.9” extension (5.1 x 9.7 x 4.8 cm)
     
  • Solid Brass, All-Purpose, Low-Voltage LED Canopy-Mounted Directional The E16 is a low-voltage directional luminaire with an integrated, replaceable LED light engine.  The light engine features four output settings from 100% to 25%, adjustable in the field.
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 799 max
    CCT 1000K (Red-Orange, 630nm)
    1500K (Amber, 595nm)
    2700K
    3000k
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 4.9" (12.4 cm)
  • Solid Brass, Low-Voltage, Directional
    • Ideal for post mounting and spaces that require a low-profile directional
    • Remote transformer required
    Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 202
    CCT 1000
    1500
    2700
    3000
    Dimensions 2.6" main body height x 3.1” extension (aimed 90°) x 2.0” canopy diameter[6.7cm x 7.9cm x 5.1cm]
  • Solid Brass, Low-profile, Low-Voltage Directional
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 249
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions Diameter: 1.6″ (4.2cm)
    Overall length from knuckle pivot: 4.1″ (10.5cm)
  • Solid Brass, Low-profile, Low-Voltage Directional
    • Directional downlight certified by International Dark Sky Association when mounted on vertical surface and aimed downward
    • Fixture comes standard with angled glare shield and Sure Aim accessory
    • Knuckle can be angled from 0° (straight down) to a maximum of 30° from vertical
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 249
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions Diameter: 1.6″ (4.2cm)
    Overall length from knuckle pivot: 5.9″ (13.9cm)
     
  • Solid Brass, Low-profile, Low-voltage Double Directional on Brass Riser
    • Can be aimed up or down
    • Ideal for tall groundcover
    Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 249
    CCT 1000
    1500
    2700
    3000
    Dimensions Diameter: 1.6″ (4.2cm)
    Overall length from knuckle pivot: 4.1″ (10.5cm)
  • Solid Brass, All-purpose, Low-voltage LED Directional The E16 is a low-voltage directional luminaire with an integrated, replaceable LED light engine.  The light engine features four output settings from 100% to 25%, adjustable in the field.
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 799 max
    CCT 1000K (Red-Orange, 630nm)
    1500K (Amber, 595nm)
    2700K
    3000k
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 4.9" (12.4 cm)
  • Solid Brass, All-purpose, Low-voltage LED Directional The E16-30-BGS-SA is a low-voltage directional luminaire with an integrated, replaceable LED light engine.  The light engine features four output settings from 100% to 25%, adjustable in the field.
    • Directional downlight certified by International Dark Sky Association when mounted on vertical surface and aimed downward
    • Fixture comes standard with angled glare shield and Sure Aim accessory
    • Knuckle can be angled from 0 (straight down) to a maximum of 30o from vertical
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 799 max
    CCT 1000K (Red-Orange, 630nm)
    1500K (Amber, 595nm)
    2700K
    3000k
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 7.3" (18.4 cm)
     
  • Solid Brass, Low-Voltage Hanging Downlight
    • Supplied with 20″ stainless steel cable, 36″ lead wire, and 1/2″ male fitting for mounting accessory
    • Can also be hung directly by loop
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 799 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2.4″ dia. x  4.2" (6 x 10.6 cm)

Title

Go to Top