• Solid Brass, All-purpose, Low-voltage LED Directional The E16 is a low-voltage directional luminaire with an integrated, replaceable LED light engine.  The light engine features four output settings from 100% to 25%, adjustable in the field.
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 799 max
    CCT 1000K (Red-Orange, 630nm)
    1500K (Amber, 595nm)
    2700K
    3000k
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 4.9" (12.4 cm)
  • 2 Watt Amber LED module (1600K) certified by Florida Fish & Wildlife Conservation Commission as "Wildlife Friendly".  
    2W-A-SP 10°
    2W-A-NFL 30°
    2W-A-FL 50°
  • Copper Malama sconce with Bird of Paradise design that fits over Beachside’s L-023 and L-024 backlighting fixtures BOP-12×6 12.0″ height x 6″ width x 4" extension from wall (30.5 x 15.2 x 10.2 cm) Custom sizes available.  Specify BOP – (Height in inches) x (Width in inches) Specifications
  • 2-Piece Brass Surface Box mount for concrete and wood installation of landscape lighting fixtures
    • Cast brass cover and mounting collar
    • Dimensions: 2" high x 4.2" diameter [5.0 x 10.6cm]
    • One 1/2" tap for fixture mounting
    • Includes three 3/8" stainless steel lag screws shields
    Specifications Instructions Template for Anchor Bolts & Conduit Positioning
  • Rough Sand Cast Round Brass Canopy with Convex Contour
    • 4.5" canopy diameter x 0.7" height (11.4 x 1.7 cm)
    • This series must be used if a SMB accessory is specified
    CM Substitution accessory for L-013 & L-014 Series fixtures, slip-fit center hole
    CM1 Substitution accessory for L-011-CM1, one center 1/2" tap
    CM2 Substitution accessory for L-011-CM2, two 1/2" taps
    CM3 Substitution accessory for L-011-CM2 with motion sensor, three 1/2" taps
     
    Specifications
  • Machined Round Brass Canopy Standard mounting plate with all Beachside wall mount fixtures.
    • 4.75" diameter x 0.5" thick (12.1 x 1.4 cm)
    • Supplied with brass crossbar for standard 2.75" and 3.5" hole spacing and single-gang boxes.
    • Supplied with gasket and black stainless steel screws
    CM-M One slip-fit center hole.  Standard with L-013, L-014, L-023, & L-024
    CM-M1 One 1/2" tap for single fixture.  Standard with L-011-CM1
    CM-M2 Two 1/2" taps for dual fixture.  Standard with L-011-CM2
    CM-M3 Three 1/2" taps for dual fixture + Motion Sensor.  Standard with L-011-CM2 with MS.
     
    Specifications Brass Crossbar Specifications (included with canopy)
  • Low-Profile Round Brass Canopy For Monopoint Directional Fixtures Using SA Accessory
    • 3.25" dia. x 0.375" tall (8.3 cm x 9.5 mm)
    • Includes corrosion-resistant brass wood screws
    Specifications
  • CTO – Color Temperature Orange Warming Filters The CTO filters allow warming of the starting color temperature, ranging from ¼ (warming approximately 300 CCT) to ¾ (warming approximately 700 CCT).  Each of the three choices are available in three different diameters, depending on with which luminaire the filter is used. Specifications
  • We often have the ability to customize an existing design or create a new fixture based on your ideas.  We welcome your inquiries.
  • 150- / 300- / 600-Watt Direct Burial Transformers The DB-series are in-grade transformers for use with remotely mounted fixtures.  They are made from compression-molded, fiberglass-reinforced polyester that is resistant to rust, corrosion, oils, gasoline, and detergents.  Housing cover is fully gasketed to provide a watertight seal. Dimensions: 7.4" x 11.8" x 4.5" (18.8 x 30 x 11.4 cm) Specifications Instructions
    DB150 150 watts
    DB300 300 watts
    DB600 600 watts
  • Solid Brass, All-Purpose, Low-Voltage LED Canopy-Mounted Directional The E16 is a low-voltage directional luminaire with an integrated, replaceable LED light engine.  The light engine features four output settings from 100% to 25%, adjustable in the field.
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 799 max
    CCT 1000K (Red-Orange, 630nm)
    1500K (Amber, 595nm)
    2700K
    3000k
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 4.9" (12.4 cm)
  • Solid Brass Low-Voltage Fixed Downlight
    • Ideal for post mounting
    • Remote transformer required
    • Custom canopy from 1/8″ thick brass available.  Consult factory with size, shape, and thru hole orientation needed.
    Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 249 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2" dia. x 3.8″ x 1.9” extension (5.1 x 9.7 x 4.8 cm)
     
  • Solid Brass, Low-Voltage, Stem-Mounted Path Light
    • Ideal for walkways and tall groundcover
    • Remote transformer required
    • Custom stem lengths available
    Voltage 12 Volts AC with integral driver (9 – 15V input, dimmable below 9V)
    Lamps Integrated LED
    Lumens max 98
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions Lamp Housing: 1.6” diameter x 3.1"  [4.2 x 7.8 cm]
     
  • Solid Brass, Low-Voltage, Stem-Mounted Path Light
    • Ideal for walkways and tall groundcover
    • Remote transformer required
    • Custom stem lengths available
    Voltage 12 Volts AC with integral driver (9 – 15V input, dimmable below 9V)
    Lamps Integrated LED
    Lumens max 32
    CCT 1000K
    1500K
    Dimensions Lamp Housing: 1.6” diameter x 3.1"  [4.2 x 7.8 cm]
     
  • Solid Brass Low-Voltage Fixed Downlight
    • Ideal for post mounting
    • Remote transformer required
    • Custom canopy from 1/8″ thick brass available.  Consult factory with size, shape, and thru hole orientation needed.
    Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 123 max
    CCT 1000K
    1500K
    Dimensions 2" dia. x 3.8″ x 1.9” extension (5.1 x 9.7 x 4.8 cm)
     
  • Solid Brass, All-Purpose, In-Grade Uplight
    • Adjustable angle up to 30°
    • Remote transformer required
    Voltage 12V AC/DC
    Lamps MR16 LED
    Lumens 630 max
    CCT 1500K
    2700K
    3000K
    Dimensions 4″ dia. x 7.9” depth (10.2 x 20 cm)
  • Solid Brass, Low-Voltage Hanging Downlight
    • Supplied with 20″ stainless steel cable, 36″ lead wire, and 1/2″ male fitting for mounting accessory
    • Can also be hung directly by loop
    • Remote transformer required
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 799 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2.4″ dia. x  4.2" (6 x 10.6 cm)
  • Solid Brass, All-purpose, Low-voltage LED Double Directional on Brass Riser The E16-S is a low-voltage, double-directional luminaire with integrated, replaceable LED light engines.  The light engines features four output settings from 100% to 25%, adjustable in the field.
    • Can be aimed up or down
    • Ideal for tall groundcover
    • Remote transformer required.
    Voltage 12V AC/DC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 799 max
    CCT 1000K (Red-Orange, 630nm)
    1500K (Amber, 595nm)
    2700K
    3000k
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 4.9" (12.4 cm)
  • Solid Brass, Low-profile Marker Light
    • Remote transformer required
    • In-ground or concrete installation
    Voltage 12 Volts AC / DC
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 3.5″ diameter x 5.3” depth [8.9 x 13.5 cm]
    3.8″ [9.6 cm] trim ring outer diameter
     
    E17 Four-Sector Illumination (standard)
    E17-1 Single-Sector Illumination
    E17-2 Two-Sector, Adjacent Illumination
    E17-OP Two-Sector, Opposite Illumination
     
    (Amber Only)
  • Solid Brass, Low-profile Marker Light
    • Remote transformer required
    • In-ground or concrete installation
    Voltage 12 Volts AC / DC
    Lamps Integrated LED, MR16 LED
    CCT 1000K
    1500K
    Dimensions 3.5″ diameter x 5.3” depth [8.9 x 13.5 cm]
    3.8″ [9.6 cm] trim ring outer diameter
     
    E17 Four-Sector Illumination (standard)
    E17-1 Single-Sector Illumination
    E17-2 Two-Sector, Adjacent Illumination
    E17-OP Two-Sector, Opposite Illumination
     
  • Solid Brass Low-Voltage Fixed Downlight
    • Remote transformer required
    Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 249 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 1.6" dia. body x 2.8" dia. base x 4″ (4.2 x 7 x 10.2 cm)
     
  • Solid Brass Low-Voltage Fixed Downlight
    • Remote transformer required
    Voltage 12V AC with integral driver (9V-15V Input, dimmable below 9V)
    Lamps Integrated LED
    Lumens 123 max
    CCT 1000K
    1500K
    Dimensions 1.6" dia. body x 2.8" dia. base x 4″ (4.2 x 7 x 10.2 cm)
     
  • Solid Brass Square Uplight
    • Can be used as an uplight, steplight, or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens 206 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2.17″ square x 3.14" depth (5.5 x 8 cm)
  • Solid Brass Low-Profile Marker Light
    • Remote transformer required
    Voltage 12 Volts AC/DC with integral driver (9-15V input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens max 15
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions Dome diameter: 2.19" [5.6 cm]
    Depth: 3.14" [8.0 cm]
     
    E3-M Four-Sector Illumination (standard)
    E3-M-1 Single-Sector Illumination
    E3-M-2 Two-Sector, Adjacent Illumination
    E3-M-OP Two-Sector, Opposite Illumination
     
    (Amber Only)
  • Solid Brass Low-Profile Marker Light
    • Remote transformer required
    Voltage 12 Volts AC/DC with integral driver (9-15V input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens max 5.6
    CCT 1000K
    1500K
    Dimensions Dome diameter: 2.19" [5.6 cm]
    Depth: 3.14" [8.0 cm]
     
    E3-M Four-Sector Illumination (standard)
    E3-M-1 Single-Sector Illumination
    E3-M-2 Two-Sector, Adjacent Illumination
    E3-M-OP Two-Sector, Opposite Illumination
     
  • Solid Brass Round Uplight
    • Can be used as an uplight, steplight, or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens 206 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2.17″ dia. x 3.14" depth (5.5 x 8 cm)
    Depth: 3.14″ (8.0cm)
  • Solid Brass Round Louvered Steplight
    • Can be used as an uplight, steplight, or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    Lumens 10.7 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2.17″ dia. x 3.14" depth (5.5 x 8 cm)
     
  • Solid Brass Round Louvered Steplight
    • Can be used as an steplight or downlight in wood or masonry
    • Remote transformer required
    Voltage 12V AC/DC (LEDs with integral driver 9V-15V Input, dimmable below 9V)
    Lamps Integrated LED, MR11 LED
    CCT 1000K
    1500K
    Dimensions 2.17″ dia. x 3.14" depth (5.5 x 8 cm)
     

Title

Go to Top