L-017 (12/120/230V LED, Halogen, Metal Halide)

The L-017 is a cast brass drive over marker light available in 12, 120, and 230 Volts.  It can be placed in soft scape or set in to concrete with the CR accessory.

More Views

  • The L-017 is a cast brass drive over marker light available in 12, 120, and 230 Volts.  It can be placed in soft scape or set in to concrete with the CR accessory.
  • L-017 in Soft Scape Adjacent to Sidewalk in Waikoloa, Island of Hawai'i
  • L-017 with Concrete Ring in Residential Driveway on O'ahu, Hawai'i
  • L-017 with Concrete Ring in Residential Driveway on O'ahu, Hawai'i
  • L-017 in Soft Scape
  • L-017 in Brick Pavers
  • L-017 in Brick Pavers

L-017  ·  L-017-A  ·  L-017-B  ·  L-017-C

Brass / Composite in-ground Pathlight for high traffic and drive-over applications

  • 6.5" (16.5 cm) Diameter x 1.9" (4.9 cm) Height
  • "CR" versions add a Concrete Ring for fully recessed concrete installation; ring diameter is 6.63" (17cm), fixture height reduces to 1.7" (4.2 cm).   [L-017-CR, L-017-A-CR, L-017-B-CR, L-017-C-CR]

 

Turtle Friendly Specifications (all models)
L-017 Specifications (12 Volts)

L-017-A Specifications (120/230V Metal Halide)
L-017-B Specifications (120/230V with 12V Transformer)
L-017-C Specifications (120/230V)

L-017 Instructions (12 Volts)
L-017-A Instructions (120/230V Metal Halide)
L-017-B Instructions (120/230V with 12V Transformer)
L-017-C Instructions (120/230V)

 

Test Reports / Photometrics

LM79 IES
L-017-C-5W-A L-017-C-5W-A
L-017-C-8W L-017-C-8W

 

Fixture Options and Lamps

L-017: 12 Volt input, Halogen or LED, Remote transformer required
L-017-B: 120 or 230 Volt input, Halogen or LED with integral transformer

GU5.3  •  MR16 LED

5W-A-NFL* 5 Watt Amber (1500K)
5W-NFL 5 Watt Warm White (3000K)
7W-NFL 7 Watt Warm White (3000K)
8W-NFL 8 Watt Warm White (3000K)

GU5.3  •  MR16 Halogen  •  50 Watts maximum

BBF 20 Watt
FMV 35 Watt
EXZ 50 Watt

 

L-017-A: 120 or 230 Volt input, Ceramic Metal Halide with integral ballast

GX10 base  •  MR16 MH  •  39 Watts maximum

MH20MR16SP 20 Watt
HM39MR16SP 39 Watt

 

L-017-C: 120 or 230 Volt input, LED for direct line voltage.

GU10 base  •  MR16 LED

5W-NFL 5 Watt Warm White (3000K)
8W-NFL 8 Watt Warm White (3000K)
5W-A-NFL* 5 Watt Amber (1500K)


 * Wildlife Lighting / Turtle Friendly as Approved by Florida Fish & Wildlife Conservation Commission


Accessories

CR Concrete Ring for recessed installation
HS17-1 Shield for single-sector illumination
HS17-2 Shield for dual adjacent-sector illumination
HS17-OP Shield for opposite-sector illumination