• Machined Round Brass Canopy Standard mounting plate with all Beachside wall mount fixtures.
    • 4.75" diameter x 0.5" thick (12.1 x 1.4 cm)
    • Supplied with brass crossbar for standard 2.75" and 3.5" hole spacing and single-gang boxes.
    • Supplied with gasket and black stainless steel screws
    CM-M One slip-fit center hole.  Standard with L-013, L-014, L-023, & L-024
    CM-M1 One 1/2" tap for single fixture.  Standard with L-011-CM1
    CM-M2 Two 1/2" taps for dual fixture.  Standard with L-011-CM2
    CM-M3 Three 1/2" taps for dual fixture + Motion Sensor.  Standard with L-011-CM2 with MS.
     
    Specifications Brass Crossbar Specifications (included with canopy)
  • Low-Profile Round Brass Canopy For Monopoint Directional Fixtures Using SA Accessory
    • 3.25" dia. x 0.375" tall (8.3 cm x 9.5 mm)
    • Includes corrosion-resistant brass wood screws
    Specifications
  • Brass Rotation Mount Standard male-threaded knuckle half is replaced with SA (threaded into canopy, fixed) and mating female knuckle half.  Allows for locking rotation using a set screw without removing the canopy.  Directional fixtures only. Specifications
  • Machined Square Brass Canopy
    • Supplied with brass crossbar for standard 2.75" and 3.5" hole spacing and single-gang boxes.
    • Supplied with gasket and black stainless steel screws
    • Dimensions: 4.75" square x 0.5" thick (12.1 x 1.4 cm)
    SQ One slip-fit center hole.  Substitution accessory for Beachside fixtures using a straight arm, including L-013 & L-014 series, L-023, and L-024.
    SQ1 One 1/2" tap for single fixture.  Substitution accessory for Beachside fixtures using standard knuckle or SA accessory, including E16 and L-011-CM & L-011-P-CM series fixtures.
    SQ2 Two 1/2" taps for dual fixture.  Substitution accessory for dual-head models (L-011-CM2, L-011-P-CM2)
    SQ3 Three 1/2" taps for dual fixture + Motion Sensor.  Standard with L-011-CM2 with MS.
      Specifications Brass Crossbar Specifications (included with canopy)
  • Small Square Brass Canopy
    • Two-part design eliminates front-facing fasteners
    • Mounting holes on back bracket at 2.75" b.c. fit standard 3.5" round or octagonal junction box
    • Dimensions: 3.5" square x 0.5" thick (8.9 x 1.3 cm)
    SQ-3.5 Square canopy with slip fitting for use with any Beachside fixture using a straight arm, including L-013-S, L-014-S, L-023, and L-024 models.
    SQ1-3.5 Square canopy with 1/2" tap for use with any Beachside fixture using standard knuckle or SA accessory, including E8 and L-011 series fixtures.
      Specifications

Title

Go to Top