- Cast brass cover and mounting collar
- Dimensions: 2" high x 4.2" diameter [5.0 x 10.6cm]
- One 1/2" tap for fixture mounting
- Includes three 3/8" stainless steel lag screws shields
-
2-Piece Brass Surface Box mount for concrete and wood installation of landscape lighting fixtures -
Heavy Duty PVC Ground Spike with Stabilizing Grid- Ideal for heavier or taller landscape lighting fixtures or areas with sandy soil.
- Rated for 12 or 120 Volts
- Overall Height: 19.0" (48 cm)
-
Heavy Duty PVC Ground Spike with Stabilizing Grid and Brass Cap- Cast brass cap for additional strength
- Ideal for heavier or taller landscape lighting fixtures or areas with sandy soil.
- Rated for 12 or 120 Volts
- Overall Height: 19.0" (48 cm)
-
Heavy-Duty Ground Spike with Brass Cap for Telescoping Stem With this product, the landscape fixture's own stem is recessed down into the ground spike. As the ground cover grows taller, the fixture can be raised to match.- Ideal for new landscapes with moderate anticipated ground cover growth
- Minimum height above cap: 1.3" (3.3 cm)
- Maximum height above cap: stem height + height of the fixture. Up to 20” range between minimum and maximum height. For example, a fixture on a fully extended 30” riser can be lowered to not less than 10” above grade.
- Height of Ground Spike, including cap and set screw fitting: 20.3" (51 cm), 3.5" (8.9 cm) of which is above ground
-
Beachside Lighting's Standard Ground Spike- Die cast brass cap and 3/16" thick PVC spike
- Ideal for light- to medium-weight fixtures
- Overall Height: 9.1" (23 cm)
-
Cast brass junction box- Ideal for concrete installation for landscape lighting fixtures
- Dimensions: 3.8" dia. x 3” tall (7.5 x 9.5 cm)
- Two 3/4" taps on opposing sides
- Two 3/4" taps on bottom
- Includes stainless steel screws
-
Riser for Uplighting Applications Brass riser for Beachside Lighting's landscape directionals E8, E16, and L-011 in applications where fixture is directed upward. Risers are available in stock sizes of 4, 8, 12, 16, and 20 inches (10, 20, 30, 40, and 51 cm), as well as custom sizes. -
Riser for Downlighting Applications Brass riser for Beachside Lighting's landscape directionals E8, E16, and L-011 in applications where fixture is directed downward, such as lighting for steps. Risers are available in stock sizes of 4, 8, 12, 16, and 20 inches (10, 20, 30, 40, and 51 cm), as well as custom sizes. -
Solid Brass Tree / Deck Mount- Two #10 sheet metal screws fasten into tree, wall, or deck
- 1/2" tap for fixture attachment
- Semi-circular cutouts for wire access
-
Solid Brass Tree Mount with Nylon Strap- Adjustable strap is available in 48", 72", and 96" lengths
- 1/2" tap for fixture attachment
- Semi-circular cutouts for wire access
-
Beachside Lighting's TDM2-SS is a brass tree mount with 1/2" threads for mounting a fixture to a tree, wall, or deck. Supplied with an adjustable stainless steel strap & buckle, it has a semi-circular cutout which can accept #12/2 landscape lighting cable. "MULT" versions (on stainless strap only) can be slid laterally and locked in place on a single strap, allowing exact positioning regardless of trunk diameter.- Adjustable strap is available in 48", 72", and 96" lengths
- 1/2" NPSM-threaded hole for fixture attachment
- Semi-circular cutouts for wire access
Specifications InstructionsTDM2-SS-48 Tree mount with 48" (122cm) stainless steel strap TDM2-SS-72 Tree mount with 72" (183cm) stainless steel strap TDM2-SS-96 Tree mount with 96" (244cm) stainless steel strap TDM2-MULT-2-72-SS Two TDM2s with backing plates and 72" (183cm) SS strap TDM2-MULT-4-72-SS Four TDM2s with backing plates and 72" (183cm) SS strap TDM2-MULT-6-72-SS Six TDM2s with backing plates and 72" (183cm) SS strap -
Beachside Lighting's VTM is a brass junction box that can be mounted individually or as part of the VTM-PALM tree strap assembly. Accepts up to two 1/2"-threaded directionals.- Supplied with two #14 x 1-1/2" stainless steel machine screws for mounting
-
Beachside Lightings VTM-PALM is a low-profile stainless steel strap assembly for tree-mounted directionals. Accepts up to four brass VTM junction boxes supporting up to eight luminaires, four up and four down. Adjustable strap is available in 70" and 88" lengths. Fits trunks ranging from 12 to 28 inches diameter.- Supplied with three meters of 12V or 120V cord
- Supplied with two 1/2" NPT nylon cordgrip connectors and two optional stainless steel screws per box
-
Tree / Beam Mount For Monopoint Directional Fixtures Using SA Accessory Made from .063" thick spun yellow brass. Mounts to surface using two #8 x 2"-long corrosion-resistant brass wood screws (included). For 12-Volt fixtures only. TDM3: Mount for directional fixtures with knuckle. Use of SA accessory is recommended for directionals. TDM3-HANG: Mount for hanging fixtures. Includes bushing and locknut. Specifications -
Tree / Beam Mount For Monopoint Directional Fixtures Using SA Accessory Two notches for surface-mounted wire Made from .063" thick spun yellow brass. Mounts to surface using two #8 x 2"-long corrosion-resistant brass wood screws (included). For 12-Volt fixtures only. TDM4: Mount for directional fixtures with knuckle. Use of SA accessory is recommended for directionals. TDM4-HANG: Mount for hanging fixtures. Includes bushing and locknut. Specifications -
Brass Tree-Mounted Junction Box with Stainless Steel Strap and Buckle- Adjustable strap is available in 48", 72", and 96" lengths
- Two 1/2" taps on opposite side walls and one in back for conduit fittings
-
Brass Tree-Mounted Junction Box with Stainless Steel Screws- Two 1/2" taps on opposite side walls and one in back for conduit fittings
- Two brackets and #14 stainless steel screws for fastening to tree or curved surface
- "NB" (No Bracket) version available for wall/flat surface mounting. Brackets and #14 screws replaced with four #10 screws for attachment via drilling through back of box