• Brass & Composite In-Ground Pathlight for High Traffic & Drive-Over Applications The L-017 series in-ground drive-over fixtures are brass & composite pathlights for high-traffic areas. This low-profile fixture is ideal for paths with low ground cover and along pathways used by golf carts, service trucks, or automobiles at country clubs & resorts.
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring diameter is 6.7″ (17cm) and exposed height reduces to 1.7″ (4.2 cm).   [L-017-CR, L-017-C-CR]
    • Remote transformer required for 12V
    Voltage 12V, 120v, 230V
    Lamps MR16 LED
    CCT 1500K
    3000K
    Dimensions 6.5″ dia. x 1.9″ exposed height (16.5 x 4.9 cm)
     
    (Amber Only)
  • Beachside Lighting’s M-Series LED Pathlights are the ultimate in heavy-duty landscape lighting.  Made of cast brass, these fixtures are larger than other Beachside pathlights.  The lamp is protected by a threaded glass lens.  Louvers are angled at 45° to eliminate glare.  Risers are schedule 80 brass pipe.  M-series fixtures with a single-louver design use directional LED sources with a reflector.  A traditional multi-louver design also is available with omnidirectional LED light sources. M-series pathlights with amber and red-orange LED lamps are certified as “Wildlife Friendly” by the Florida Fish & Wildlife Conservation Commission.  To view these fixtures click HERE.
    • Durable construction: all brass components
    • Stems available in three sizes: 16″, 20″ (standard), & 24
    • CSA Listed to US and Canadian safety standards, file #190030
    Voltage 12V, 120V, 230V
    Lamps Integrated LED, MR16 LED
    CCT 1000
    1500
    2700
    3000
     
  • Beachside Lighting’s R-Series LED Pathlights have set the standard for durability in low-voltage walkway and area lighting.  The completely sealed fixture allows easy access to the brass lamp compartment for tool-free relamping.  Features include an 18-gauge copper shade, a 5 mm-thick frosted glass lens, and a riser made from schedule 40 brass pipe.  The lamping is MR16 LED, allowing both 12V and 120V/230V options.  The upward-directed lamp hits a reflector in the shade assembly.  Most shade heights are positioned so their lower edge is at the bottom of the glass, resulting in low-to-no glare. All fixtures are CSA Listed to US and Canadian safety standards, file #190030.
    • Durable construction: all brass components and copper shades
    Voltage 12V, 120V, 230V
    Lamps LED
    CCT 1000K
    1500K
    2700K
    3000K
     
  • Solid Brass, All-Purpose Directional
    • Directional downlight certified by International Dark Sky Association when mounted on VERTICAL surface and aimed downward. This fixture will not work nor be Dark Sky compliant if mounted to a horizontal surface such as the ground or ceiling.
    • Fixture comes standard with angled glare shield and Sure Aim accessory
    • Knuckle can be angled from 0 (straight down) to a maximum of 30o from vertical
    • Remote transformer required for 12V
    Voltage 12V, 120V
    Lamps MR16 LED
    Lumens 79 max
    CCT 1500K
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 7.3″ (18.4 cm)
     
  • Solid Brass Fixed Downlight
    • Lamp is recessed for glare reduction
    • Remote transformer required for 12V
    Voltage 12V, 120V, 230V
    Lamps Integrated LED, MR16 LED
    Lumens 338 max (8W)
    CCT 1000K
    1500K
    Dimensions 2.4" dia. body x 4.75" dia. base x 4.7″ (6 x 12.1 x 12 cm)
     
  • Wall-Mounted Brass Downlight
    • Remote transformer required for 12V
    • Certified for indoor (12V) or outdoor use
    Voltage 12V, 120V, 230V
    Lamps Integrated LED light engine, MR16 LED
    Lumens 372 max
    CCT 1000K
    1300K
    1500K
    Dimensions 5.9"/14.9 cm tall (MR16), 6.6"/16.8 cm tall (light engine)
    2.4" dia lamp body x 3.7" extension from wall (6 x 9.3 cm)
     
  • Brass & Composite In-Ground Aimable Uplight The L-010 series in-ground drive-over fixtures are brass & composite uplights for high-traffic areas.  An internal bracket assembly allows 360° rotation and angling of the lamp up to 16° before any cutoff.
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring diameter is 6.7″ (17cm) and exposed height reduces reduces to 0.3" (0.8 cm).   [L-010-CR, L-010-C-CR]
    • Remote transformer required for 12V
    Voltage 12V, 120v, 230V
    Lamps  Integrated LED, MR16 LED
    Lumens 799 max
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 6.5″ dia. x 0.6″ exposed height (16.5 x 1.3 cm)
  • Solid Brass, All-Purpose Directional
    • Lamp is recessed for glare reduction on 12V unshielded versions
    • Stepped glass allows flush surface to prevent collection of dirt/debris
    • Angled and full cutoff glare shields available
    • Remote transformer required for 12V
    Voltage 12V, 120V, 230V
    Lamps MR16 LED
    Lumens 630 max
    CCT 1500K
    2700K
    3000K
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 4.9″ (12.4 cm)
  • Solid Brass, All-Purpose Directional
    • Directional downlight certified by International Dark Sky Association when mounted on VERTICAL surface and aimed downward. This fixture will not work nor be Dark Sky compliant if mounted to a horizontal surface such as the ground or ceiling.
    • Fixture comes standard with angled glare shield and Sure Aim accessory
    • Knuckle can be angled from 0 (straight down) to a maximum of 30o from vertical
    • Remote transformer required for 12V
    Voltage 12V, 120V, 230V
    Lamps MR16 LED
    Lumens 630 max
    CCT 1500K
    2700K
    3000K
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 7.3″ (18.4 cm)
     
  • Solid Brass Fixed Downlight
    • Lamp is recessed for glare reduction
    • Remote transformer required for 12V
    Voltage 12V, 120V, 230V
    Lamps Integrated LED, MR16 LED & Halogen
    Lumens 791 max (11W)
    CCT 1000K
    1500K
    2700K
    3000K
    Dimensions 2.4" dia. body x 4.75" dia. base x 4.7″ (6 x 12.1 x 12 cm)
     
  • Solid Brass Canopy-Mounted Directional
    • Lamp is recessed for glare reduction on 12V unshielded versions
    • Remote transformer required for 12V
    Voltage 12V, 120V, 230V
    Lamps MR16 LED
    Lumens 630 max
    CCT 1500K
    2700K
    3000K
    Dimensions Diameter: 2.4" (6 cm)
    Length from knuckle pivot: 4.9″ (12.4 cm)
  • Solid Brass Canopy-Mounted Double Directional
    • Lamp is recessed for glare reduction on 12V unshielded versions
    • Remote transformer required for 12V
    Voltage 12V, 120V, 230V
    Lamps MR16 LED
    Lumens 630 max (per lamp)
    CCT 1500K
    2700K
    3000K
    Dimensions Diameter: 2.4" (6 cm)
    Length from knuckle pivot: 4.9″ (12.4 cm)
  • Solid Brass, All-Purpose, Low-Voltage Directional with Extended Snoot — Downlighting Applications Only For uplighting applications, use standard L-011 with BGSF full-cutoff glare shield, which has weep hole.
    • Lamp is recessed for glare reduction.  Ideal for lamps with a maximum beam spread of 40°.
    • Remote transformer required for 12V.
    Voltage 12V, 120V, 230V
    Lamps MR16 LED
    Lumens 630 max
    CCT 1500K
    2700K
    3000K
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 5.9″ (14.9 cm)
  • Brass Outdoor Gobo Pattern Projector
    • Fixture uses stainless steel gobos (51.5 mm overall diameter) to project a pattern onto ground or wall
    • Remote transformer required for 12 Volt
    Voltage 12V, 120V, 230V
    Lamps MR16 LED & Metal Halide
    CCT 2700K
    3000K
    Dimensions 2.5″ diameter (6.3 cm)
    Overall length from knuckle pivot: 5.9″ (14.9 cm) for 12 Volt, 7.8″ (19.9 cm) for 120/230 Volt
  • Ceiling-Mounted Brass Outdoor Gobo Pattern Projector Downlight
    • Fixture uses stainless steel gobos (51.5 mm overall diameter) to project a pattern onto ground or wall
    • Remote transformer required for 12 Volt
    Voltage 12V, 120V, 230V
    Lamps MR16 LED & Metal Halide
    CCT 2700K
    3000K
    Dimensions 2.5″ dia. lamp housing (6.3 cm), 4.75″ dia. canopy (12.1 cm)
    Overall height: 5.6″ (14.4 cm) for 12 Volt, 7.6″ (19.5 cm) for 120/230 Volt
  • Brass Outdoor Canopy-Mounted Gobo Pattern Projector
    • Fixture uses stainless steel gobos (51.5 mm overall diameter) to project a pattern onto ground or wall
    • Remote transformer required for 12 Volt
    Voltage 12V, 120V, 230V
    Lamps MR16 LED & Metal Halide
    CCT 2700K
    3000K
    Dimensions 2.5″ dia. lamp housing (6.3 cm), 4.75″ dia. canopy (12.1 cm)
    Overall length from knuckle pivot: 5.9″ (14.9 cm) for 12 Volt, 7.9″ (20.1 cm) for 120/230 Volt
  • Dual-Head Brass Outdoor Canopy-Mounted Gobo Pattern Projector
    • Fixture uses stainless steel gobos (51.5 mm overall diameter) to project a pattern onto ground or wall
    • Remote transformer required for 12 Volt
    Voltage 12V, 120V, 230V
    Lamps MR16 LED & Metal Halide
    CCT 2700K
    3000K
    Dimensions 2.5″ dia. lamp housing (6.3 cm), 4.75″ dia. canopy (12.1 cm)
    Overall length from knuckle pivot: 5.9″ (14.9 cm) for 12 Volt, 7.8″ (19.9 cm) for 120/230 Volt
  • Brass Double Directional on Riser The L-011-S2 is a double directional directional luminaire on a brass riser for use with MR16 drop-in lamps.
    • Can be aimed up or down.
    • Ideal for tall groundcover.
    • Lamps are recessed for glare reduction on 12V unshielded versions.  Ideal for lamps with a maximum beam spread of 60°.
    • L-011-S2-WA (wide angle) version available with lamp positioning closer to glass for lamps greater than 60° (unshielded 12V versions only).
    Voltage 12V, 120V, 230V
    Lamps MR16 LED
    Lumens 630 max
    CCT 1500K
    2700K
    3000K
    Dimensions Diameter: 2.4" (6 cm)
    Overall length from knuckle pivot: 4.9″ (12.4 cm)
  • Wall-Mounted Brass Up-/Downlight with Copper Shade
    • Remote transformer required for 12V
    • CSA Listed for US and Canada, file #190030
    • Certified for indoor (12V) or outdoor use
    Voltage 12V, 120V
    Lamps (12V) G4 LED, GU5.3 MR16 LED
    Lamps (120V) G9 LED, GU10 MR16 LED
    Lumens 525 max (bottom)
    CCT 1300K
    1400K
    1500K
    2700K
    3000K
    Dimensions R3: 9.0" shade diameter x 9.6" height (22.9 x 24.3 cm)
  • Wall-Mounted Brass Up-/Downlight
    • Remote transformer required for 12V
    • CSA Listed for US and Canada, file #190030
    • Certified for indoor (12V) or outdoor use
    Voltage 12V, 120V, 230V
    Lamps Integrated LED light engine, MR16 LED
    Lumens 799 max (per lamp)
    CCT 1000K
    1300K
    1500K
    2700K
    3000K
    Dimensions 8.5"/21.6 cm tall (MR16), 10"/25.3 cm tall (light engine)
    2.4" dia lamp body x 3.7" extension from wall (6 x 9.3 cm)
  • Wall-Mounted Brass Uplight with Copper Shade
    • Remote transformer required for 12V
    • CSA Listed for US and Canada, file #190030
    • Certified for indoor (12V only) or outdoor use
    Voltage 12V, 120V
    Lamps G4 & G9 LED
    CCT 1400
    1500
    2700
    3000
    Dimensions R3: 9.0" shade diameter x 9.6" height (22.9 x 24.3 cm)
  • Wall-Mounted Brass Downlight
    • Remote transformer required for 12V
    • CSA Listed for US and Canada, file #190030
    • Certified for indoor (12V) or outdoor use
    Voltage 12V, 120V, 230V
    Lamps Integrated LED light engine, MR16 LED
    Lumens 799 max
    CCT 1000K
    1300K
    1500K
    2700K
    3000K
    Dimensions 5.9"/14.9 cm tall (MR16), 6.6"/16.8 cm tall (light engine)
    2.4" dia lamp body x 3.7" extension from wall (6 x 9.3 cm)
     
  • Brass & Composite In-Ground Pathlight for High Traffic & Drive-Over Applications The L-017 series in-ground drive-over fixtures are brass & composite pathlights for high-traffic areas. This low-profile fixture is ideal for paths with low ground cover and along pathways used by golf carts, service trucks, or automobiles at country clubs & resorts.
    • CR” versions add a Concrete Ring for fully recessed concrete installation.  Ring diameter is 6.7″ (17cm) and exposed height reduces to 1.7″ (4.2 cm).   [L-017-CR, L-017-C-CR]
    • Remote transformer required for 12V
    Voltage 12V, 120v, 230V
    Lamps MR16 LED
    CCT 1500K
    Dimensions 6.5″ dia. x 1.9″ exposed height (16.5 x 4.9 cm)
     
  • Classic-Style Bollard for Concrete Installation The MB1 is an unobtrusive, contemporary pathlight/bollard hybrid with 180° illumination via the field-rotatable top assembly.
    • 360° illumination option (MB1-360)
    • Durable construction – all brass components
    • Can be mounted on optional stems
    • Custom fixture heights available
    Voltage 12V, 120V, 230V, 277V
    Lamps LED, Halogen
    CCT 1000
    1500
    2700
    3000
    Dimensions 1.6″ diameter x 16.9″ height (4.1 x 42.8 cm)
     
  • Classic-Style Bollard for Concrete Installation
    • Durable construction – all brass components
    Voltage 12V, 120V, 230V, 277V
    Lamps Integrated LED, MR16 LED & Metal Halide
    Lumens 463 max
    CCT 1500K
    2700K
    3000K
    Dimensions 4″ dia. x 26.6″ (10.2 x 67.4 cm)
     
  • The MB-Series bollards are the ultimate in heavy-duty landscape lighting.  Made of cast brass, these fixtures are larger in scale than other Beachside fixtures and use omnidirectional LED lamps.  Access to the vapor-proof glass lens for re-lamping is via stainless steel screws at the underside of the bottom louver.  Standard shaft heights are 4, 12, and 28 inches; custom shaft heights are available. The MB-Series bollards have another application ideal for their rugged construction: docks.  A standard 4″ high x 4″ diameter shaft surrounds an internal brass collar, which is securely attached to the top of a pylon by 3/8″ stainless steel lag screws.  Cast brass louvers angled at 45 degrees surround the lens to virtually eliminate glare. MB-series bollards with amber and red-orange LED lamps are certified as “Wildlife Friendly” by the Florida Fish & Wildlife Conservation Commission.  To view these fixtures click HERE.
    • Remote transformer required for 12V
    • Durable construction: all brass components and shades
    • CSA Listed to US and Canadian safety standards, file #190030
    Voltage 12V, 120V, 230V
    Lamps LED
    CCT 1500K
    2700K
    3000K
     
  • FFWCC Wildlife Certification # 2018-029 Beachside Lighting’s M-Series LED Pathlights are the ultimate in heavy-duty landscape lighting.  Made of cast brass, these fixtures are larger than other Beachside pathlights.  The lamp is protected by a threaded glass lens.  Risers are schedule 80 brass pipe.
    • Remote transformer required for 12V
    • Durable construction: all brass components
    • Stems available in three sizes: 16″, 20″ (standard), & 24
    • CSA Listed to US and Canadian safety standards, file #190030
    Voltage 12V, 120V, 230V
    Lamps Integrated LED, MR16 LED
    CCT 1000
    1500
  • FFWCC Wildlife Certification # 2018-029 Beachside Lighting’s M-Series LED Pathlights are the ultimate in heavy-duty landscape lighting.  Made of cast brass, these fixtures are larger than other Beachside pathlights.  The lamp is protected by a threaded glass lens.  Risers are schedule 80 brass pipe.
    • Remote transformer required for 12V
    • Durable construction: all brass components
    • Stems available in three sizes: 16″, 20″ (standard), & 24
    • CSA Listed to US and Canadian safety standards, file #190030
    Voltage 12V, 120V, 230V
    Lamps Integrated LED, MR16 LED
    CCT 1000
    1500

Title

Go to Top